Pretraživanje
Prikaz rezultata 1-10 od 3244
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin ...
Selective magnetic GMA based potential sorbents for molybdenum and rhenium sorption
(Elsevier Science Sa, Lausanne, 2017)
Magnetic macroporous crosslinked copolymer glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA) samples with different magnetite content were prepared by suspension copolymerization and functionalized ...
The comparative study of the corrosion stability of Zn-Ni-Co alloy coatings deposited from chloride and sulphate baths / Uporedna analiza korozione stabilnosti prevlaka Zn-Ni-Co legura elektrohemijski taloženih iz hloridnih i sulfatnih rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The ternary Zn-Ni-Co alloy coatings were electrodeposited on steel from chloride and sulphate baths. The deposition was carried out galvanostatically at different current densities at ambient temperatures from additives ...
Impact testing with controlled energy of multiaxial aramid fabrics with various types of reinforcement / Ispitivanje udarima kontrolisane energije multiaksijalnih aramidnih lamina sa različitim tipovima ojačanja
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The physical and mechanical properties of the six samples of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were analyzed by high speed impact tester. The samples were impregnated with 10 wt.% poly (vinyl ...
Back to basics: avoiding errors in scientific research and publications
(Savez hemijskih inženjera, Beograd, 2019)
Ad-hoc intercomparison of four different radon exhalation measurement methods
(Oxford Univ Press, Oxford, 2018)
It is indicated that the exposure to radon originating from the building materials is not negligible and the radon exhalation measurement should get more attention in the future. The experience with four different methods ...
Intensification of a chemical reactor for methanol synthesis through forced periodic operations- Evaluation based on Nonlinear Frequency Response Analysis
(2nd International Process Intensification Conference, Leuven, Belgium, 2019)
In this work, the NFR method is implemented for evaluation of possible improvement for the reaction of methanol synthesis by hydrogenation of CO and CO2, using a standard Cu/ZnO/Al2O3 catalyst. For start, a forced periodically ...
Life Cycle Impact Assessment of Miscanthus Crop for Sustainable Household Heating in Serbia
(MDPI, Basel, 2018)
This paper investigates the environmental impacts and energy benefits of the cultivation of Miscanthus (Miscanthus x giganteus Greef et Deu.), in order to initiate its use in sustainable household heating in the Republic ...
Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
(Springer Heidelberg, Heidelberg, 2019)
Iron oxide, in the form of magnetite (MG)-functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous ...
Industrial steel waste as an iron source to promote heterogeneous and homogeneous oxidation/reduction reactions
(Elsevier Sci Ltd, Oxford, 2019)
This work examines the mill scale (MS) of hot rolling, a waste product formed in industrial steel processing. MS was evaluated as an iron source in promoting the oxidation of Reactive Red 120 azo dye in location-sourced ...