dc.creator | Popović, Miljana | |
dc.creator | Radetić, Tamara | |
dc.creator | Romhanji, Endre | |
dc.date.accessioned | 2021-03-10T11:52:28Z | |
dc.date.available | 2021-03-10T11:52:28Z | |
dc.date.issued | 2012 | |
dc.identifier.isbn | 978-1-11845-804-4 | |
dc.identifier.uri | http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2162 | |
dc.description.abstract | This study was performed on the Al-Mg alloy with the chemical composition: Al-Mg6.8-Mn0.51-Fe0.2-Si0.1. As-received cold rolled material (O-temper) was subjected to (i) cold rolling and annealing at 265 degrees C and 320 degrees C, followed by (ii) sensitization treatment at 100 degrees C. Microstructure characterization showed beta-phase precipitation were grain boundaries and preexisting Mn-rich particles. The annealing temperature had significant beta-phase morphology: microstructure of sensitized specimens annealed at 265 degrees C was characterized by formation of discontinuous particles, while annealing at 320 degrees C resulted in the formation of the thin film at grain boundaries. Presence of the thin film induced corrosion resistance degradation and also affected grain boundary morphology: initially smooth, curved grain boundaries became strongly faceted. | en |
dc.publisher | John Wiley & Sons, Chichester | |
dc.rights | restrictedAccess | |
dc.source | Proceedings of the 13th International Conference on Aluminum Alloys (ICAA13) | |
dc.subject | Al-Mg alloy | en |
dc.subject | beta-phase precipitation | en |
dc.subject | corrosion | en |
dc.title | Precipitation of the beta-phase and corrosion behavior of an al-6.8 wt.% mg alloy | en |
dc.type | conferenceObject | |
dc.rights.license | ARR | |
dc.citation.epage | 369 | |
dc.citation.other | : 363-369 | |
dc.citation.spage | 363 | |
dc.identifier.rcub | https://hdl.handle.net/21.15107/rcub_technorep_2162 | |
dc.identifier.wos | 000325479800055 | |
dc.type.version | publishedVersion | |