Metal-polymer and polymer-polymer microcantilevers: promising alternative to Si-based MEMS
Само за регистроване кориснике
2015
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Polymers are very attractive as thin films in emerging reel-to-reel manufacturing or as spin coated from liquid form in a quick and low cost process in standard microfabrication processes. There is a wide selection of materials available with many different thermal, electrical, and mechanical properties. With continuous growth in consumer electronics and sensors sectors, the range of potential application fields is further diversifying and integration of MEMS modules, as well as delivering IC functionality in thin foil-like packaging with proven reliability and reduction in cost is increasingly required. Furthermore, increased volume and decentralisation of testing within medical diagnostics field worldwide (IVD Point of Care and Patient Self Testing trends) require low cost solutions for disposable test cartridges and other supporting consumables. In majority of the emerging medical applications, integrated, low cost sensors need to operate in liquid environment, often rendering the u...se of standard Si-based solutions inadequate and costly. Polymer-based microcantilevers, realised by standard surface microfabrication techniques, were chosen for this study as the alternative approach to Si-based MEMS. Cantilevers are well understood microstructures and so provide an excellent vehicle for assessing both thermo-mechanical properties of polymers as MEMS materials and their potential for die-level packaging and integration into miniaturized systems. Due to the nature of processes involved and their thermal budget, substitution of Si substrate with e.g. flexible substrates or polymer films is foreseen in the near future. Fabricated cantilever beams consist of various combinations of thin metal/polymer and polymer/polymer films. Polyimides, as structural material, have been selected for this study due to inherently good mechanical properties, good chemical resistance, low dielectric constant and high thermal stability.
Извор:
Journal of Materials Science-Materials in Electronics, 2015, 26, 11, 8698-8706Издавач:
- Springer, Dordrecht
DOI: 10.1007/s10854-015-3545-7
ISSN: 0957-4522
WoS: 000362663300056
Scopus: 2-s2.0-84943587992
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Đakov, Tatjana AU - Rajaković, Ljubinka V. AU - Popović, Ivanka PY - 2015 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3134 AB - Polymers are very attractive as thin films in emerging reel-to-reel manufacturing or as spin coated from liquid form in a quick and low cost process in standard microfabrication processes. There is a wide selection of materials available with many different thermal, electrical, and mechanical properties. With continuous growth in consumer electronics and sensors sectors, the range of potential application fields is further diversifying and integration of MEMS modules, as well as delivering IC functionality in thin foil-like packaging with proven reliability and reduction in cost is increasingly required. Furthermore, increased volume and decentralisation of testing within medical diagnostics field worldwide (IVD Point of Care and Patient Self Testing trends) require low cost solutions for disposable test cartridges and other supporting consumables. In majority of the emerging medical applications, integrated, low cost sensors need to operate in liquid environment, often rendering the use of standard Si-based solutions inadequate and costly. Polymer-based microcantilevers, realised by standard surface microfabrication techniques, were chosen for this study as the alternative approach to Si-based MEMS. Cantilevers are well understood microstructures and so provide an excellent vehicle for assessing both thermo-mechanical properties of polymers as MEMS materials and their potential for die-level packaging and integration into miniaturized systems. Due to the nature of processes involved and their thermal budget, substitution of Si substrate with e.g. flexible substrates or polymer films is foreseen in the near future. Fabricated cantilever beams consist of various combinations of thin metal/polymer and polymer/polymer films. Polyimides, as structural material, have been selected for this study due to inherently good mechanical properties, good chemical resistance, low dielectric constant and high thermal stability. PB - Springer, Dordrecht T2 - Journal of Materials Science-Materials in Electronics T1 - Metal-polymer and polymer-polymer microcantilevers: promising alternative to Si-based MEMS EP - 8706 IS - 11 SP - 8698 VL - 26 DO - 10.1007/s10854-015-3545-7 ER -
@article{ author = "Đakov, Tatjana and Rajaković, Ljubinka V. and Popović, Ivanka", year = "2015", abstract = "Polymers are very attractive as thin films in emerging reel-to-reel manufacturing or as spin coated from liquid form in a quick and low cost process in standard microfabrication processes. There is a wide selection of materials available with many different thermal, electrical, and mechanical properties. With continuous growth in consumer electronics and sensors sectors, the range of potential application fields is further diversifying and integration of MEMS modules, as well as delivering IC functionality in thin foil-like packaging with proven reliability and reduction in cost is increasingly required. Furthermore, increased volume and decentralisation of testing within medical diagnostics field worldwide (IVD Point of Care and Patient Self Testing trends) require low cost solutions for disposable test cartridges and other supporting consumables. In majority of the emerging medical applications, integrated, low cost sensors need to operate in liquid environment, often rendering the use of standard Si-based solutions inadequate and costly. Polymer-based microcantilevers, realised by standard surface microfabrication techniques, were chosen for this study as the alternative approach to Si-based MEMS. Cantilevers are well understood microstructures and so provide an excellent vehicle for assessing both thermo-mechanical properties of polymers as MEMS materials and their potential for die-level packaging and integration into miniaturized systems. Due to the nature of processes involved and their thermal budget, substitution of Si substrate with e.g. flexible substrates or polymer films is foreseen in the near future. Fabricated cantilever beams consist of various combinations of thin metal/polymer and polymer/polymer films. Polyimides, as structural material, have been selected for this study due to inherently good mechanical properties, good chemical resistance, low dielectric constant and high thermal stability.", publisher = "Springer, Dordrecht", journal = "Journal of Materials Science-Materials in Electronics", title = "Metal-polymer and polymer-polymer microcantilevers: promising alternative to Si-based MEMS", pages = "8706-8698", number = "11", volume = "26", doi = "10.1007/s10854-015-3545-7" }
Đakov, T., Rajaković, L. V.,& Popović, I.. (2015). Metal-polymer and polymer-polymer microcantilevers: promising alternative to Si-based MEMS. in Journal of Materials Science-Materials in Electronics Springer, Dordrecht., 26(11), 8698-8706. https://doi.org/10.1007/s10854-015-3545-7
Đakov T, Rajaković LV, Popović I. Metal-polymer and polymer-polymer microcantilevers: promising alternative to Si-based MEMS. in Journal of Materials Science-Materials in Electronics. 2015;26(11):8698-8706. doi:10.1007/s10854-015-3545-7 .
Đakov, Tatjana, Rajaković, Ljubinka V., Popović, Ivanka, "Metal-polymer and polymer-polymer microcantilevers: promising alternative to Si-based MEMS" in Journal of Materials Science-Materials in Electronics, 26, no. 11 (2015):8698-8706, https://doi.org/10.1007/s10854-015-3545-7 . .