Leaching of metastannic acid from e-waste by-products
Само за регистроване кориснике
2020
Аутори
Đokić, JovanaJovančićević, Branimir
Brčeski, Ilija
Ranitović, Milisav
Gajić, Nataša
Kamberović, Željko
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Anode slime and tin precipitate as by-products of the electrorefining (ER) of non-standard anodes obtained after experimental smelting of waste electric and electronic equipment (e-waste), in addition to the base and precious metals, contains a significant amount of tin. Due to its presence as inert SnO(2)hydrate (beta metastannic acid) and its dissipation between slime and electrolyte, anode slime processing and metals valorization are difficult. This study aimed to investigate conditions under which efficient leaching of metastannic acid could be achieved to facilitate further metals valorization, especially precious metals. The investigation was performed using the by-products obtained from the ER of the non-standard Cu anodes produced by pyrometallurgical processing of e-waste. After detailed characterization of obtained products, the influence of various process parameters like temperature, acid concentration, leaching time, as well as the influence of reducing agent, sulfur compo...unds, and SnO(2)hydration rate on leaching efficiency was investigated. It was found that efficiency of 99% can be achieved by leaching the desulfurized tin precipitate sample in 6 M HCl at 90 degrees C for 90 min with the addition of Mg powder. The application of the tin removal process, described in this paper, contributes to efficient material flow management. [GRAPHICS] .
Кључне речи:
E-waste / Tin / Metastannic acid / Leaching / Anode slimeИзвор:
Journal of Material Cycles and Waste Management, 2020, 22, 6, 1899-1912Издавач:
- Springer, New York
Финансирање / пројекти:
- Ministry of Education, Science and Technological Development, Republic of Serbia
DOI: 10.1007/s10163-020-01076-5
ISSN: 1438-4957
WoS: 000546526600001
Scopus: 2-s2.0-85087719836
Колекције
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Đokić, Jovana AU - Jovančićević, Branimir AU - Brčeski, Ilija AU - Ranitović, Milisav AU - Gajić, Nataša AU - Kamberović, Željko PY - 2020 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4522 AB - Anode slime and tin precipitate as by-products of the electrorefining (ER) of non-standard anodes obtained after experimental smelting of waste electric and electronic equipment (e-waste), in addition to the base and precious metals, contains a significant amount of tin. Due to its presence as inert SnO(2)hydrate (beta metastannic acid) and its dissipation between slime and electrolyte, anode slime processing and metals valorization are difficult. This study aimed to investigate conditions under which efficient leaching of metastannic acid could be achieved to facilitate further metals valorization, especially precious metals. The investigation was performed using the by-products obtained from the ER of the non-standard Cu anodes produced by pyrometallurgical processing of e-waste. After detailed characterization of obtained products, the influence of various process parameters like temperature, acid concentration, leaching time, as well as the influence of reducing agent, sulfur compounds, and SnO(2)hydration rate on leaching efficiency was investigated. It was found that efficiency of 99% can be achieved by leaching the desulfurized tin precipitate sample in 6 M HCl at 90 degrees C for 90 min with the addition of Mg powder. The application of the tin removal process, described in this paper, contributes to efficient material flow management. [GRAPHICS] . PB - Springer, New York T2 - Journal of Material Cycles and Waste Management T1 - Leaching of metastannic acid from e-waste by-products EP - 1912 IS - 6 SP - 1899 VL - 22 DO - 10.1007/s10163-020-01076-5 ER -
@article{ author = "Đokić, Jovana and Jovančićević, Branimir and Brčeski, Ilija and Ranitović, Milisav and Gajić, Nataša and Kamberović, Željko", year = "2020", abstract = "Anode slime and tin precipitate as by-products of the electrorefining (ER) of non-standard anodes obtained after experimental smelting of waste electric and electronic equipment (e-waste), in addition to the base and precious metals, contains a significant amount of tin. Due to its presence as inert SnO(2)hydrate (beta metastannic acid) and its dissipation between slime and electrolyte, anode slime processing and metals valorization are difficult. This study aimed to investigate conditions under which efficient leaching of metastannic acid could be achieved to facilitate further metals valorization, especially precious metals. The investigation was performed using the by-products obtained from the ER of the non-standard Cu anodes produced by pyrometallurgical processing of e-waste. After detailed characterization of obtained products, the influence of various process parameters like temperature, acid concentration, leaching time, as well as the influence of reducing agent, sulfur compounds, and SnO(2)hydration rate on leaching efficiency was investigated. It was found that efficiency of 99% can be achieved by leaching the desulfurized tin precipitate sample in 6 M HCl at 90 degrees C for 90 min with the addition of Mg powder. The application of the tin removal process, described in this paper, contributes to efficient material flow management. [GRAPHICS] .", publisher = "Springer, New York", journal = "Journal of Material Cycles and Waste Management", title = "Leaching of metastannic acid from e-waste by-products", pages = "1912-1899", number = "6", volume = "22", doi = "10.1007/s10163-020-01076-5" }
Đokić, J., Jovančićević, B., Brčeski, I., Ranitović, M., Gajić, N.,& Kamberović, Ž.. (2020). Leaching of metastannic acid from e-waste by-products. in Journal of Material Cycles and Waste Management Springer, New York., 22(6), 1899-1912. https://doi.org/10.1007/s10163-020-01076-5
Đokić J, Jovančićević B, Brčeski I, Ranitović M, Gajić N, Kamberović Ž. Leaching of metastannic acid from e-waste by-products. in Journal of Material Cycles and Waste Management. 2020;22(6):1899-1912. doi:10.1007/s10163-020-01076-5 .
Đokić, Jovana, Jovančićević, Branimir, Brčeski, Ilija, Ranitović, Milisav, Gajić, Nataša, Kamberović, Željko, "Leaching of metastannic acid from e-waste by-products" in Journal of Material Cycles and Waste Management, 22, no. 6 (2020):1899-1912, https://doi.org/10.1007/s10163-020-01076-5 . .