Претраживање
Приказ резултата 31-40 од 52
Characterization of microporous PP/PE nonwoven mats surface modified by deposition of electrospun nanofibers
(Journal of the Textile Institute, 2023)
This study investigates the effect of surface modification by deposition of electrospun fibers on properties and performance of three different microporous polypropylene/polyethylene (PP/PE) commercial nonwoven membrane ...
Enhanced antimicrobial properties and bioactivity of 3D-printed titanium scaffolds by multilayer bioceramic coating for large bone defects
(IOP Publishing, 2023)
The restoration of large bone defects caused by trauma, tumor resection, or infection is a major clinical problem in orthopedics and dentistry because postoperative infections, corrosion, and limited osteointegration of ...
Application of the Integrated Supercritical Fluid Extraction–Impregnation Process (SFE-SSI) for Development of Materials with Antiviral Properties
(MDPI, 2022)
The integrated supercritical fluid extraction–impregnation process (SFE-SSI) was performed to fabricate material with antiviral properties against the herpes simplex virus (HSV). Cotton gauze and starch/chitosan polymer ...
Electrospun polyacrylonitrile fibers incorporated with microporous carbon for improved airborne PM2.5 filtration
(Elsevier Ltd, 2022)
Particulate matter 2.5 (PM2.5) pollutant particles have been identified as significant participants in air pollution, thus, special attention is paid to air filtration as a method of their efficient removal. A novel and ...
Influence of pilling on the quality of flax single jersey knitted fabrics
(SAGE Publications Ltd, 2022)
In this work, the quality of four plain single jersey weft-knitted fabrics (produced from the same flax yarn) having different structural characteristics (stitch density, weight, and thickness) before and after pilling, ...
TiO2 nanotubes film/FTO glass interface: Thermal treatment effects
(ETRAN, 2022)
Pure Ti films deposited by radio-frequency magnetron sputtering on FTO glass were anodized to fabricate TiO2 nanotubes (NTs) arrays. The TiO2 NTs/FTO samples were sintered at 450, 550 and 630°C, in ambient air. The thermal ...
Achieving a Superhydrophobic, Moisture, Oil and Gas Barrier Film Using a Regenerated Cellulose–Calcium Carbonate Composite Derived from Paper Components or Waste
(MDPI, 2022)
It has been a persistent challenge to develop eco-friendly packaging cellulose film providing the required multiple barrier properties whilst simultaneously contributing to a circular economy. Typically, a cellulosic film ...
Oxidized jute as a valuable adsorbent for Congo Red from an aqueous solution
(SAGE Publications Ltd., 2022)
The raw jute fabric was oxidized with 0.2% or 0.4% NaIO4 for 60 or 120 min to obtain valuable adsorbents for the textile dye Congo Red (CR). Batch adsorption experiments were carried out as a function of solution pH, contact ...
Studying the influence of common wet processes on the quality of 1 × 1 rib cotton/elastane knitted fabrics
(SAGE Publications Ltd, 2022)
This research studied the influence of common wet processes (i.e. bleaching, dyeing, or softening) on the quality of 1 × 1 rib cotton/elastane knitted fabrics. The changes in their structural (thickness, weight, and stitch ...
Clinoptilolite—An Efficient Carrier for Catalytically Active Nano Oxide Particles
(MDPI, 2023)
Many efforts have been devoted to produce green materials and technology to prevent and minimize the adverse effects on the environment and human health caused primarily by population growth and industrial progress. Over ...