Претраживање
Приказ резултата 11-20 од 36
Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites
(Polymer Composites, 2021)
In this study, halloysite nanotubes (HNT) were modified by: 3-glycidyloxypropyltrimethoxysilane (GLYMO), 3-aminopropyltrimethoxysilane (APTES), and 2,2-Bis[4-(glycidyloxy) phenyl] propane (DGEBA), and incorporated in the ...
THE INFLUENCE OF RHODIUM CONTENT ON THE MECHANICAL PROPERTIES OF PLATINUM
(Bor : Mining and Metallurgy Institute, 2015)
The paper presents the results of investigation the influence of rhodium as an alloying element on the mechanical properties of platinum. A short-term and tensile strength were tested, at room and high temperatures, and ...
Semi-Interpenetrating Networks Based on Poly(N-isopropyl acrylamide) and Poly(N-vinylpyrrolidone)
(Wiley, Hoboken, 2009)
Three series of novel semi-interpenetrating polymer networks, based on crosslinked poly(N-isopropylacrylamide), PNIPA, and different amounts of the linear poly(N-vinylpyrrolidone), PVP, were synthesized to improve the ...
Denture composite reinforced with short polyethylene terephthalate fibers
(John Wiley and Sons Inc., 2022)
Polymer matrix composite materials have found application in dentistry because of good mechanical properties, aesthetic, easy processing, and possibilities of the repair. Acrylates are materials used to make and repair ...
The effect of accelerated aging on the mechanical properties of PMMA denture base materials modified with itaconates / Uticaj ubrzanog starenja na mehanička svojstva poli(metil-metakrilatnih) materijala za bazu zubnih proteza modifikovanih itakonatima
(Association of Chemical Engineers of Serbia, 2011)
This study evaluated the effect of accelerated aging on tensile strength, elongation at break, hardness and Charpy impact strength in commercial PMMA denture base material modified with di-methyl itaconate (DMI) and ...
Dynamic mechanical properties of aramid fabrics impregnated with multiwalled carbon nanotubes / Dinamičko mehanička svojstva aramidnih lamina impregnisanih sa višeslojnim ugljeničnim nanocevima
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
Carbon nanotubes (CNT) represent allotropes of carbon with a cylindrical nanostructure. In multiwalled carbon nanotubes (MWCNT), graphitic layers make up concentric tubes. The multiwalled nanotubes length in our research ...
Structural and mechanical properties of different hard welded coatings for impact plate for ventilation mill
(SUDURA Publishing House, 2011)
Ag+, Cu2+ and Zn2+ doped hydroxyapatite/tricalcium phosphate bioceramics: Influence of doping and sintering technique on mechanical properties
(University of Novi Sad, Faculty of Technology, 2018)
Green hydroxyapatite ceramics were obtained by cold uniaxial and isostatic pressing of hydrothermally synthesized powders, pure hydroxyapatite and hydroxyapatite doped with Ag+, Cu2+ and Zn2+ ions. The ceramics were ...
Effect of AL2O3 particles on the toughness of hybrid composite with EVA matrix and UHMWPE fibersas reinforcement / Uticaj AL2O3 čestica na žilavost hibridnog kompozita sa EVA matricom ojačanog UHMWPE vlaknima
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The aim of this paper is to investigate the mechanical properties of hybrid composites with the polymer matrix of the copolymer of ethylene and vinyl acetate (EVA), ultra high molecular weight polyethylene fibers (UHMWPE) ...
Experimental and numerical investigations of the critical values of J-integral for the steel of steam pipelines
(Elsevier Science Bv, Amsterdam, 2018)
Steel grade 14MoV6-3 is a low-carbon microalloyed steel with addition of chromium and molybdenum. This grade is designed mainly for power industry applications, withstanding operating at elevated temperatures.In this paper, ...