Претраживање
Приказ резултата 31-40 од 57
Bisphenol a removal from aqueous solution using fine alpha-fe2o3 particles
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Iron(III) oxide particles (alpha-Fe2O3) were obtained from ferrous chloride (FeCl3 center dot 6H(2)O) precursor using ammonium hydroxide as a precipitating agent and particles were calcined at 700 degrees C for 4 h. ...
Graphene reinforced hydroxyapatite biocomposite coatings obtained by electrophoretic deposition on titanium / Biokompozitne prevlake hidroksiapatita ojačane grafenom, dobijene elektroforetskim taloženjem na titanu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Fast ongoing research of graphene-based nanomaterials reveals that their exceptional properties could be utized for biomedical applications, especially in tissue engineering and drug delivery. Here, we summarized the results ...
Recyclability of technology metals from E-waste: Case study of in and Ga recovery from magnetic fraction
(Association of Metallurgical Engineers of Serbia, 2019)
This study presents the results of the theoretical assessment and a preliminary experimental investigation of technology metals (TM) recovery from magnetic fraction obtained after mechanical treatment of waste printed ...
Ethanol Thymus serpyllum extracts: Evaluation of extraction conditions via total polyphenol content and radical scavenging activity
(Institute for Medicinal Plants Research "Dr. Josif Pancic", 2019)
The aim of the present study was the optimization of the extraction conditions (particle size, solid-to-solvent ratio, extraction time and procedure) via total polyphenol content and radical scavenging activity, using wild ...
Synthesis of novel wo3/zrsio4 catalysts for dehalogenation of halogenated hydrocarbons
(Savez inženjera metalurgije Srbije, Beograd, 2019)
This research aimed to develop a novel catalyst based on WO3/ZrSiO4 system for halogenated hydrocarbons processing. The production method of this catalyst involved extrusion and as such was simplified compared to thermo-chemical ...
Inventive level as a basis for the assessment of scientific contribution of inventors / Inventivni nivo pronalaska kao osnov za procenu naučnog doprinosa pronalazača
(University of Belgrade - Faculty of Mechanical Engineering, Belgrade, 2019)
The history of invention reveals that the most important inventions were derived from experiments by which their authors contributed to the discovery of previously unknown natural phenomena. So the question arises as to ...
Characterisation of the nanotubular oxide layer formed on the ultrafine-grained titanium
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Commercially pure titanium (cpTi) and titanium alloys are metallic implant materials usually used in dentistry and orthopaedics. In order to improve implant properties, Ti-based materials may be surface modified by different ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Sanacija čelične konstrukcije strele samohodne autodizalice TADAHO TL 200 II/K Repair of steel construction on truck-mounted crane TADAHO TL 200 II/K
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2012)
Optimizing the thermal gradient and the pulling speed in a thermoplastic pultrusion process of pet/e glass fibers using finite element method
(Savez inženjera metalurgije Srbije, Beograd, 2018)
A thermoplastic pultrusion process was examined using commercial fiber roving of PET/E glass, to determine the optimum pulling speed and optimal zonal temperatures. Finite element analysis predicted heat transfer through ...