Pretraživanje
Prikaz rezultata 1-10 od 61
Micro-kinetic model of fructo-oligosaccharide synthesis for prebiotic products
(John Wiley and Sons Inc., 2023)
A new micro-kinetic model of the enzyme-catalyzed synthesis of fructo-oligosaccharides (FOS) was developed. A commercial enzyme mixture Pectinex® Ultra SP-L derived from Aspergillus aculeatus was used. A variety of initial ...
Characterization of microporous PP/PE nonwoven mats surface modified by deposition of electrospun nanofibers
(Journal of the Textile Institute, 2023)
This study investigates the effect of surface modification by deposition of electrospun fibers on properties and performance of three different microporous polypropylene/polyethylene (PP/PE) commercial nonwoven membrane ...
Enhanced antimicrobial properties and bioactivity of 3D-printed titanium scaffolds by multilayer bioceramic coating for large bone defects
(IOP Publishing, 2023)
The restoration of large bone defects caused by trauma, tumor resection, or infection is a major clinical problem in orthopedics and dentistry because postoperative infections, corrosion, and limited osteointegration of ...
Application of the Integrated Supercritical Fluid Extraction–Impregnation Process (SFE-SSI) for Development of Materials with Antiviral Properties
(MDPI, 2022)
The integrated supercritical fluid extraction–impregnation process (SFE-SSI) was performed to fabricate material with antiviral properties against the herpes simplex virus (HSV). Cotton gauze and starch/chitosan polymer ...
Effects of poly(vinyl alcohol) blending with Ag/alginate solutions to form nanocomposite fibres for potential use as antibacterial wound dressings
(Royal Society Publishing, 2022)
In this work, nanocomposite fibres and microfibres based on alginate and poly(vinyl alcohol) (PVA) with silver nanoparticles (AgNPs) were produced and characterized for potential application as antibacterial wound dressings. ...
Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent
(International Institute for the Science of Sintering (IISS), 2022)
In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were ...
Self-healing capability of novel eco-epoxy adhesives based on the modified tannic acid on Al adherends tested in a single lap joint
(Elsevier Ltd., 2022)
The aim of this paper is to study the self-healing capability of fractured Al joints bonded with novel eco-epoxide adhesives synthesized from a bio-renewable raw material (tannic acid – TA). Two synthesized eco-epoxy ...
Obtaining Polysaccharide-Based Fabrics with Improved Moisture Sorption and Dye Adsorption Properties
(MDPI, 2023)
Raw jute fabric was treated with 0.5, 1.0, or 2.0% chitosan solution to improve its sorption
properties (evaluated through the moisture sorption and adsorption of textile dye Reactive Orange 16 (RO 16)), which are essential ...
Cellulose-Based Waste in a Close Loop as an Adsorbent for Removing Dyes from Textile Industry Wastewater
(MDPI, 2024)
In an attempt to reuse fibrous textile waste and, at the same time, to address dye pollution
in textile wastewater, waste cotton-based yarn was utilized as a cheap and sustainable adsorbent, as
well as a row material for ...
Plasma Treatment as a Sustainable Method for Enhancing the Wettability of Jute Fabrics
(MDPI, 2023)
In this paper, raw jute fabric was subjected to atmospheric pressure dielectric barrier discharge (at 150 or 300 Hz) to enhance its wettability, i.e., capillarity and wetting time. Attenuated Total Reflectance-Fourier ...