Претраживање
Приказ резултата 21-30 од 859
Dealloying of PdNi5 Alloy in 1.0M Nitric Acid
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2023)
Binary palladium alloys with nickel are known to have catalytic activity and are also used as catalyst-trap in the synthesis of nitric acid. High Pd alloys are corrosive resistant in many solutions, including highly alkaline ...
Solidified structure and leaching properties of metallurgical wastewater treatment sludge after solidification/stabilization process
(Taylor & Francis Inc, Philadelphia, 2016)
The presented study investigates solidification/stabilization process of hazardous heavy metals/arsenic sludge, generated after the treatment of the wastewater from a primary copper smelter. Fly ash and fly ash with addition ...
Trends in Encapsulation Technologies for Delivery of Food Bioactive Compounds
(Springer, New York, 2015)
The food industry expects increasingly complex properties (such as delayed release, stability, thermal protection, and suitable sensorial profile) from food ingredients, which often would not be able to be achieved without ...
Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots
(Elsevier Sci Ltd, Oxford, 2015)
Ordered titania nanotubes (pore diameter approximate to 90 nm and wall thickness approximate to 10 nm) were obtained by the anodization technique and used for the ex-situ deposition of cadmium sulfide quantum dots (CdS ...
Determination and analysis of the dynamic loaded screws by structural analysis, fractography and numerical simulation
(Trans Tech Publications Ltd, Durnten-Zurich, 2013)
This paper analysis the cause's dynamically loaded screws failure, using the structural analysis of mechanical properties and numerical simulation. The comparison with the new unbroken screws, which were not in use, has ...
Framework of new landfill GHG policy in developing countries: Case study of Serbia
(Wiley Periodicals, Inc, San Francisco, 2019)
This paper deals with greenhouse gas (GHG) emissions originating from changes in the waste sector in developing and transitional economies. Using a Serbian case study, the effects of different waste disposal techniques on ...
Isopiestic determination of the osmotic and activity coefficients of the {yMg(NO3)(2) + (1-y)MgSO4}(aq) system at T=298.15 K
(Academic Press Ltd- Elsevier Science Ltd, London, 2017)
Isopiestic (vapor pressure) measurements were made for aqueous mixtures of Mg(NO3)(2) and MgSO4 at T = (298.15 +/- 0.01) K with Mg(NO3)(2) ionic strength fractions y = (0.19691, 0.42542, 0.60113, 0.79583, and 1), along ...
The influence of lecithin from different sources on crystallization and physical properties of nontrans fat
(Wiley-Blackwell, Hoboken, 2013)
Crystallization and physical properties of nontrans vegetable fat with the addition of soybean, sunflower and rapeseed lecithin were investigated in this paper. NMR technique was used for measuring the solid fat content ...
Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots
(Elsevier Sci Ltd, Oxford, 2017)
A process of obtaining N-doped TiO2 nanotubes sensitized by CdS nanoparticles is presented, including detailed characterizations performed along the synthesis. Transparent TiO2 films consisting of nanotubes, 2.5 mu m long ...
Nanomechanical and anti-stabbing properties of Kolon fabric composites reinforced with hybrid nanoparticles
(Elsevier Sci Ltd, Oxford, 2017)
In this study carbon nanotubes (CNT) and silica nanoparticles (SiO2) were added to enhance the dynamic mechanical and anti-stabbing properties of the polyurethaneip-aramid multiaxial fabric (Kolon fabric) composites for ...