A Core-Shell Amino-Functionalized Magnetic Molecularly Imprinted Polymer Based on Glycidyl Methacrylate for Dispersive Solid-Phase Microextraction of Aniline
Аутори
Tadić, TamaraMarković, Bojana
Radulović, Jelena
Lukić, Jelena
Suručić, Ljiljana
Nastasović, Aleksandra
Onjia, Antonije
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
A core-shell amino-functionalized glycidyl methacrylate magnetic molecularly imprinted polymer (MIP) was synthesized by the suspension polymerization/surface imprinting method and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), mercury porosimetry, nitrogen gas adsorption–desorption, and elemental analysis. This MIP was used as the sorbent in dispersive solid-phase microextraction (DSPME) of aniline from textile wastewater prior to high-performance liquid chromatography-mass spectrometry (HPLC-MS) measurements. Since aniline is toxic and a probable human carcinogen, its determination in water is of great significance. This is a challenging task because aniline is usually present at trace levels. The effects of different DSPME variables on the preconcentration efficiency have been studied by using the Plackett–Burman screening design of experiments (DoE) followed by response surface methodology optimization using the Box-Behnken desig...n. Thus, DoE enabled the investigation of several variables simultaneously. Under optimized conditions, aniline was effectively and selectively separated by a small amount of the DSPME sorbent and detected in real textile wastewater samples. The method detection limit of 1 ng mL−1 was attained, with good method linearity and acceptable recovery and precision. The results showed that the studied MIP could be a reliable DSPME sorbent for efficiently analyzing trace aniline in real wastewater samples.
Кључне речи:
aromatic amines / design of experiment / DSPME / LC-MS/MS / MIP / wastewaterИзвор:
Sustainability (Switzerland), 2022, 14, 15, 9222-Издавач:
- MDPI
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200026 (Универзитет у Београду, Институт за хемију, технологију и металургију - ИХТМ) (RS-MESTD-inst-2020-200026)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-MESTD-inst-2020-200135)
DOI: 10.3390/su14159222
ISSN: 2071-1050
WoS: 00083915820000
Scopus: 2-s2.0-85137179796
Колекције
Институција/група
Inovacioni centarTY - JOUR AU - Tadić, Tamara AU - Marković, Bojana AU - Radulović, Jelena AU - Lukić, Jelena AU - Suručić, Ljiljana AU - Nastasović, Aleksandra AU - Onjia, Antonije PY - 2022 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5200 AB - A core-shell amino-functionalized glycidyl methacrylate magnetic molecularly imprinted polymer (MIP) was synthesized by the suspension polymerization/surface imprinting method and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), mercury porosimetry, nitrogen gas adsorption–desorption, and elemental analysis. This MIP was used as the sorbent in dispersive solid-phase microextraction (DSPME) of aniline from textile wastewater prior to high-performance liquid chromatography-mass spectrometry (HPLC-MS) measurements. Since aniline is toxic and a probable human carcinogen, its determination in water is of great significance. This is a challenging task because aniline is usually present at trace levels. The effects of different DSPME variables on the preconcentration efficiency have been studied by using the Plackett–Burman screening design of experiments (DoE) followed by response surface methodology optimization using the Box-Behnken design. Thus, DoE enabled the investigation of several variables simultaneously. Under optimized conditions, aniline was effectively and selectively separated by a small amount of the DSPME sorbent and detected in real textile wastewater samples. The method detection limit of 1 ng mL−1 was attained, with good method linearity and acceptable recovery and precision. The results showed that the studied MIP could be a reliable DSPME sorbent for efficiently analyzing trace aniline in real wastewater samples. PB - MDPI T2 - Sustainability (Switzerland) T1 - A Core-Shell Amino-Functionalized Magnetic Molecularly Imprinted Polymer Based on Glycidyl Methacrylate for Dispersive Solid-Phase Microextraction of Aniline IS - 15 SP - 9222 VL - 14 DO - 10.3390/su14159222 ER -
@article{ author = "Tadić, Tamara and Marković, Bojana and Radulović, Jelena and Lukić, Jelena and Suručić, Ljiljana and Nastasović, Aleksandra and Onjia, Antonije", year = "2022", abstract = "A core-shell amino-functionalized glycidyl methacrylate magnetic molecularly imprinted polymer (MIP) was synthesized by the suspension polymerization/surface imprinting method and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), mercury porosimetry, nitrogen gas adsorption–desorption, and elemental analysis. This MIP was used as the sorbent in dispersive solid-phase microextraction (DSPME) of aniline from textile wastewater prior to high-performance liquid chromatography-mass spectrometry (HPLC-MS) measurements. Since aniline is toxic and a probable human carcinogen, its determination in water is of great significance. This is a challenging task because aniline is usually present at trace levels. The effects of different DSPME variables on the preconcentration efficiency have been studied by using the Plackett–Burman screening design of experiments (DoE) followed by response surface methodology optimization using the Box-Behnken design. Thus, DoE enabled the investigation of several variables simultaneously. Under optimized conditions, aniline was effectively and selectively separated by a small amount of the DSPME sorbent and detected in real textile wastewater samples. The method detection limit of 1 ng mL−1 was attained, with good method linearity and acceptable recovery and precision. The results showed that the studied MIP could be a reliable DSPME sorbent for efficiently analyzing trace aniline in real wastewater samples.", publisher = "MDPI", journal = "Sustainability (Switzerland)", title = "A Core-Shell Amino-Functionalized Magnetic Molecularly Imprinted Polymer Based on Glycidyl Methacrylate for Dispersive Solid-Phase Microextraction of Aniline", number = "15", pages = "9222", volume = "14", doi = "10.3390/su14159222" }
Tadić, T., Marković, B., Radulović, J., Lukić, J., Suručić, L., Nastasović, A.,& Onjia, A.. (2022). A Core-Shell Amino-Functionalized Magnetic Molecularly Imprinted Polymer Based on Glycidyl Methacrylate for Dispersive Solid-Phase Microextraction of Aniline. in Sustainability (Switzerland) MDPI., 14(15), 9222. https://doi.org/10.3390/su14159222
Tadić T, Marković B, Radulović J, Lukić J, Suručić L, Nastasović A, Onjia A. A Core-Shell Amino-Functionalized Magnetic Molecularly Imprinted Polymer Based on Glycidyl Methacrylate for Dispersive Solid-Phase Microextraction of Aniline. in Sustainability (Switzerland). 2022;14(15):9222. doi:10.3390/su14159222 .
Tadić, Tamara, Marković, Bojana, Radulović, Jelena, Lukić, Jelena, Suručić, Ljiljana, Nastasović, Aleksandra, Onjia, Antonije, "A Core-Shell Amino-Functionalized Magnetic Molecularly Imprinted Polymer Based on Glycidyl Methacrylate for Dispersive Solid-Phase Microextraction of Aniline" in Sustainability (Switzerland), 14, no. 15 (2022):9222, https://doi.org/10.3390/su14159222 . .