Mechanical activation of talc in high-energy speed rotary mechanoactivator
Само за регистроване кориснике
2012
Аутори
Andrić, LjubišaAćimović-Pavlović, Zagorka
Pavlović, Ninoslav
Milošević, Vladan
Milićević, Sonja
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper presents the results of research on mechanical activation of raw talc in a high-energy speed rotary mechanoactivator. The results of research on effect of mechanically activated talc on the degree of recovery Fe 2O 3 by hydrometallurgical method are also presented. The process and mechanism of mechanical activation in this type of mechanoactivator were achieved by impact. The variable parameters of the mechanoactivator operation were: rate of rotor revolutions (n 0 = 10,000 and n 0 = 20,000 rpm), circle sieve mesh (80, 120, 200 and 500 μm) and the current intensity. The following parameters of the dry mechanical activation process were studied: mechanical activation time, rotor speed, mechanoactivator capacity and specific energy consumption. The mechanically activated powder was examined by application of differential thermal and thermogravimetric analyses, analysis of the degree of mechanical activation and the specific surface area as well. According to the obtained resul...ts, the highest rate of mechanical activation was obtained with a nominal mechanoactivator load. The degree of mechanical activation increases with increasing the rate of rotor revolution, circle sieve mesh size and with the increasing mechanoactivator load. It was shown that high-grade talc concentrate with low content of Fe 2O 3 can be obtained by physical-chemical process. A new approach for obtaining high-grade talc concentrate was achieved trough mechanically activated talc effect on the degree of recovery of Fe 2O 3 by hydrometallurgical process.
Кључне речи:
High-energy-speed rotary mechanoactivator / Mechanical activation / TalcИзвор:
Ceramics International, 2012, 38, 4, 2913-2920Издавач:
- Elsevier Ltd
- Techna Group S.r.l.
Финансирање / пројекти:
- Имплементација савременијих техничко-технолошких и еколошких решења у постојећим производним системима Рудника Бакра Бор и Рудника Бакра Мајданпек (RS-MESTD-Technological Development (TD or TR)-33007)
- Механохемијски третман недовољно квалитетних минералних сировина (RS-MESTD-Technological Development (TD or TR)-34006)
DOI: 10.1016/j.ceramint.2011.11.067
ISSN: 0272-8842
WoS: 000302522700041
Scopus: 2-s2.0-84858080137
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Andrić, Ljubiša AU - Aćimović-Pavlović, Zagorka AU - Pavlović, Ninoslav AU - Milošević, Vladan AU - Milićević, Sonja PY - 2012 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5730 AB - This paper presents the results of research on mechanical activation of raw talc in a high-energy speed rotary mechanoactivator. The results of research on effect of mechanically activated talc on the degree of recovery Fe 2O 3 by hydrometallurgical method are also presented. The process and mechanism of mechanical activation in this type of mechanoactivator were achieved by impact. The variable parameters of the mechanoactivator operation were: rate of rotor revolutions (n 0 = 10,000 and n 0 = 20,000 rpm), circle sieve mesh (80, 120, 200 and 500 μm) and the current intensity. The following parameters of the dry mechanical activation process were studied: mechanical activation time, rotor speed, mechanoactivator capacity and specific energy consumption. The mechanically activated powder was examined by application of differential thermal and thermogravimetric analyses, analysis of the degree of mechanical activation and the specific surface area as well. According to the obtained results, the highest rate of mechanical activation was obtained with a nominal mechanoactivator load. The degree of mechanical activation increases with increasing the rate of rotor revolution, circle sieve mesh size and with the increasing mechanoactivator load. It was shown that high-grade talc concentrate with low content of Fe 2O 3 can be obtained by physical-chemical process. A new approach for obtaining high-grade talc concentrate was achieved trough mechanically activated talc effect on the degree of recovery of Fe 2O 3 by hydrometallurgical process. PB - Elsevier Ltd PB - Techna Group S.r.l. T2 - Ceramics International T1 - Mechanical activation of talc in high-energy speed rotary mechanoactivator EP - 2920 IS - 4 SP - 2913 VL - 38 DO - 10.1016/j.ceramint.2011.11.067 ER -
@article{ author = "Andrić, Ljubiša and Aćimović-Pavlović, Zagorka and Pavlović, Ninoslav and Milošević, Vladan and Milićević, Sonja", year = "2012", abstract = "This paper presents the results of research on mechanical activation of raw talc in a high-energy speed rotary mechanoactivator. The results of research on effect of mechanically activated talc on the degree of recovery Fe 2O 3 by hydrometallurgical method are also presented. The process and mechanism of mechanical activation in this type of mechanoactivator were achieved by impact. The variable parameters of the mechanoactivator operation were: rate of rotor revolutions (n 0 = 10,000 and n 0 = 20,000 rpm), circle sieve mesh (80, 120, 200 and 500 μm) and the current intensity. The following parameters of the dry mechanical activation process were studied: mechanical activation time, rotor speed, mechanoactivator capacity and specific energy consumption. The mechanically activated powder was examined by application of differential thermal and thermogravimetric analyses, analysis of the degree of mechanical activation and the specific surface area as well. According to the obtained results, the highest rate of mechanical activation was obtained with a nominal mechanoactivator load. The degree of mechanical activation increases with increasing the rate of rotor revolution, circle sieve mesh size and with the increasing mechanoactivator load. It was shown that high-grade talc concentrate with low content of Fe 2O 3 can be obtained by physical-chemical process. A new approach for obtaining high-grade talc concentrate was achieved trough mechanically activated talc effect on the degree of recovery of Fe 2O 3 by hydrometallurgical process.", publisher = "Elsevier Ltd, Techna Group S.r.l.", journal = "Ceramics International", title = "Mechanical activation of talc in high-energy speed rotary mechanoactivator", pages = "2920-2913", number = "4", volume = "38", doi = "10.1016/j.ceramint.2011.11.067" }
Andrić, L., Aćimović-Pavlović, Z., Pavlović, N., Milošević, V.,& Milićević, S.. (2012). Mechanical activation of talc in high-energy speed rotary mechanoactivator. in Ceramics International Elsevier Ltd., 38(4), 2913-2920. https://doi.org/10.1016/j.ceramint.2011.11.067
Andrić L, Aćimović-Pavlović Z, Pavlović N, Milošević V, Milićević S. Mechanical activation of talc in high-energy speed rotary mechanoactivator. in Ceramics International. 2012;38(4):2913-2920. doi:10.1016/j.ceramint.2011.11.067 .
Andrić, Ljubiša, Aćimović-Pavlović, Zagorka, Pavlović, Ninoslav, Milošević, Vladan, Milićević, Sonja, "Mechanical activation of talc in high-energy speed rotary mechanoactivator" in Ceramics International, 38, no. 4 (2012):2913-2920, https://doi.org/10.1016/j.ceramint.2011.11.067 . .