TY  - JOUR
AU  - Trajković, Isaak
AU  - Rakin, Marko
AU  - Milošević, Miloš
AU  - Mitrović, Nenad
AU  - Travica, Milan
AU  - Sedmak, Aleksandar
AU  - Međo, Bojan
PY  - 2023
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6649
AB  - In order to develop a non-standard method for determining the resistance to fracture and damage of pipeline materials, a new geometry of ring-shaped specimens with sharp notches or cracks has been defined. The need to develop a new method for testing of the specimens cut from the pipes arises due to the difficulties in determination of fracture mechanics parameters on thin-walled pressure pipelines, especially those with a smaller cross-section, by application of the standard procedures/specimens. Previous studies dealing with the topic of pipeline testing by non-standard methods are presented in the introductory part of the paper. In the experimental part of the research, tests on PRNT (Pipe Ring Notched Tension) and SENT (Single Edge Notched Tension) specimens are performed. Samples of these specimens were produced by SLS (Selective Laser Sintering) technique of additive production from PA12 (polyamide PA 2200) material. For the purpose of this study, a tool that is protected at the national level (in Serbia) as intellectual property is used for testing of the ring-shaped PRNT specimens. Tensile testing of both types of specimens is monitored by Aramis GOM 2M system; its operation is based on the method of digital image correlation, DIC. Additionally, finite element analyses are conducted on the PRNT and SENT geometries, enabling the calculation of the fracture mechanics parameter – Stress intensity factor K. It is concluded that the presented procedure based on the PRNT specimen has a good potential for use as a non-standard method for fracture resistance examination of pipeline materials. It can be performed on the specimens cut directly from the pipes (new or from exploitation). The dependence of the fracture resistance on the stress concentrator size is not pronounced, which means that the results depend dominantly on the material properties, rather than on geometry.
PB  - Elsevier Ltd.
T2  - Engineering Fracture Mechanics
T1  - Selective laser sintered Pipe Ring Notched Tension specimens for examination of fracture properties of pipeline materials
SP  - 109573
VL  - 292
DO  - 10.1016/j.engfracmech.2023.109573
ER  - 

@article{
author = "Trajković, Isaak and Rakin, Marko and Milošević, Miloš and Mitrović, Nenad and Travica, Milan and Sedmak, Aleksandar and Međo, Bojan",
year = "2023",
abstract = "In order to develop a non-standard method for determining the resistance to fracture and damage of pipeline materials, a new geometry of ring-shaped specimens with sharp notches or cracks has been defined. The need to develop a new method for testing of the specimens cut from the pipes arises due to the difficulties in determination of fracture mechanics parameters on thin-walled pressure pipelines, especially those with a smaller cross-section, by application of the standard procedures/specimens. Previous studies dealing with the topic of pipeline testing by non-standard methods are presented in the introductory part of the paper. In the experimental part of the research, tests on PRNT (Pipe Ring Notched Tension) and SENT (Single Edge Notched Tension) specimens are performed. Samples of these specimens were produced by SLS (Selective Laser Sintering) technique of additive production from PA12 (polyamide PA 2200) material. For the purpose of this study, a tool that is protected at the national level (in Serbia) as intellectual property is used for testing of the ring-shaped PRNT specimens. Tensile testing of both types of specimens is monitored by Aramis GOM 2M system; its operation is based on the method of digital image correlation, DIC. Additionally, finite element analyses are conducted on the PRNT and SENT geometries, enabling the calculation of the fracture mechanics parameter – Stress intensity factor K. It is concluded that the presented procedure based on the PRNT specimen has a good potential for use as a non-standard method for fracture resistance examination of pipeline materials. It can be performed on the specimens cut directly from the pipes (new or from exploitation). The dependence of the fracture resistance on the stress concentrator size is not pronounced, which means that the results depend dominantly on the material properties, rather than on geometry.",
publisher = "Elsevier Ltd.",
journal = "Engineering Fracture Mechanics",
title = "Selective laser sintered Pipe Ring Notched Tension specimens for examination of fracture properties of pipeline materials",
pages = "109573",
volume = "292",
doi = "10.1016/j.engfracmech.2023.109573"
}

Trajković, I., Rakin, M., Milošević, M., Mitrović, N., Travica, M., Sedmak, A.,& Međo, B.. (2023). Selective laser sintered Pipe Ring Notched Tension specimens for examination of fracture properties of pipeline materials. in Engineering Fracture Mechanics
Elsevier Ltd.., 292, 109573.
https://doi.org/10.1016/j.engfracmech.2023.109573

Trajković I, Rakin M, Milošević M, Mitrović N, Travica M, Sedmak A, Međo B. Selective laser sintered Pipe Ring Notched Tension specimens for examination of fracture properties of pipeline materials. in Engineering Fracture Mechanics. 2023;292:109573.
doi:10.1016/j.engfracmech.2023.109573 .

Trajković, Isaak, Rakin, Marko, Milošević, Miloš, Mitrović, Nenad, Travica, Milan, Sedmak, Aleksandar, Međo, Bojan, "Selective laser sintered Pipe Ring Notched Tension specimens for examination of fracture properties of pipeline materials" in Engineering Fracture Mechanics, 292 (2023):109573,
https://doi.org/10.1016/j.engfracmech.2023.109573 . .

TY  - JOUR
AU  - Jelić, Aleksandra
AU  - Sekulić, Milica
AU  - Travica, Milan
AU  - Gržetić, Jelena
AU  - Ugrinović, Vukašin
AU  - Marinković, Aleksandar D.
AU  - Božić, Aleksandra
AU  - Stamenović, Marina
AU  - Putić, Slaviša
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5110
AB  - In this study, silicate nanofillers; dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite; were synthesized using four different methods and incorporated into the epoxy resin to improve its mechanical properties. Characterization of the newly synthesized nanofillers was performed using Fourier-transformation infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The purpose of this study was to analyze newly developed composite materials reinforced with silicate nanoparticles utilizing tensile testing and a full-field non-contact 3D Digital Image Correlation (DIC) method. Analysis of deformation and displacement fields gives precise material behavior during testing. Testing results allowed a more reliable assessment of the structural integrity of epoxy composite materials reinforced using different silicate nanofillers. It was concluded that the addition of 3% of dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite lead to the increasement of tensile strength up to 31.5%, 29.0%, 27.5%, and 23.5% in comparison with neat epoxy, respectively. In order to offer more trustworthy information about the viscoelastic behavior of neat epoxy and composites, a dynamic mechanical analysis (DMA) was also performed and rheological measurements of uncured epoxy matrix and epoxy suspensions were obtained.
PB  - MDPI
T2  - Polymers
T1  - Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)
IS  - 6
SP  - 1255
VL  - 14
DO  - 10.3390/polym14061255
ER  - 

@article{
author = "Jelić, Aleksandra and Sekulić, Milica and Travica, Milan and Gržetić, Jelena and Ugrinović, Vukašin and Marinković, Aleksandar D. and Božić, Aleksandra and Stamenović, Marina and Putić, Slaviša",
year = "2022",
abstract = "In this study, silicate nanofillers; dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite; were synthesized using four different methods and incorporated into the epoxy resin to improve its mechanical properties. Characterization of the newly synthesized nanofillers was performed using Fourier-transformation infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The purpose of this study was to analyze newly developed composite materials reinforced with silicate nanoparticles utilizing tensile testing and a full-field non-contact 3D Digital Image Correlation (DIC) method. Analysis of deformation and displacement fields gives precise material behavior during testing. Testing results allowed a more reliable assessment of the structural integrity of epoxy composite materials reinforced using different silicate nanofillers. It was concluded that the addition of 3% of dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite lead to the increasement of tensile strength up to 31.5%, 29.0%, 27.5%, and 23.5% in comparison with neat epoxy, respectively. In order to offer more trustworthy information about the viscoelastic behavior of neat epoxy and composites, a dynamic mechanical analysis (DMA) was also performed and rheological measurements of uncured epoxy matrix and epoxy suspensions were obtained.",
publisher = "MDPI",
journal = "Polymers",
title = "Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)",
number = "6",
pages = "1255",
volume = "14",
doi = "10.3390/polym14061255"
}

Jelić, A., Sekulić, M., Travica, M., Gržetić, J., Ugrinović, V., Marinković, A. D., Božić, A., Stamenović, M.,& Putić, S.. (2022). Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC). in Polymers
MDPI., 14(6), 1255.
https://doi.org/10.3390/polym14061255

Jelić A, Sekulić M, Travica M, Gržetić J, Ugrinović V, Marinković AD, Božić A, Stamenović M, Putić S. Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC). in Polymers. 2022;14(6):1255.
doi:10.3390/polym14061255 .

Jelić, Aleksandra, Sekulić, Milica, Travica, Milan, Gržetić, Jelena, Ugrinović, Vukašin, Marinković, Aleksandar D., Božić, Aleksandra, Stamenović, Marina, Putić, Slaviša, "Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)" in Polymers, 14, no. 6 (2022):1255,
https://doi.org/10.3390/polym14061255 . .

TY  - JOUR
AU  - Trajković, Isaak
AU  - Milošević, Miloš
AU  - Travica, Milan
AU  - Rakin, Marko
AU  - Mladenović, Goran
AU  - Kudrjavceva, Ljudmila
AU  - Međo, Bojan
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5348
AB  - This paper presents a part of development of a non-standard method for testing of cylindrical test specimens for measurement of fracture properties of pipeline materials. This method for testing of cylindrical structures working under pressure is based on determining of fracture mechanics parameters on SENT (Single Edge Notched Tension) specimens and new PRNT (Pipe Ring Notched Tension) specimens. In this work, both types of specimens required for this testing were manufactured from polyamide PA12 by using SLS (selective laser sintering) additive manufacturing method. Testing of the specimens is performed on the universal device for testing of mechanical properties of materials Shimadzu, AGS-X 100 kN. The tensile testing is accompanied by GOM Aramis 2M system, used for digital image correlation. By using these two systems, test results are obtained for ring-shaped and SENT specimens, including forces, displacements and fracture mechanics parameters CMOD (Crack Mouth Opening Displacement) and CTOD-δ5 (Crack Tip Opening Displacement obtained by δ5 technique), as well as crack growth. Repeatability of this process, along with valid result consistency, represent the basis for further development of the new method, including the determining of energy-based fracture mechanics parameters: J integral and stress intensity factor.
PB  - International Institute for the Science of Sintering (IISS)
T2  - Science of Sintering
T1  - Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens
EP  - 386
IS  - 3
SP  - 373
VL  - 54
DO  - 10.2298/SOS2203373T
ER  - 

@article{
author = "Trajković, Isaak and Milošević, Miloš and Travica, Milan and Rakin, Marko and Mladenović, Goran and Kudrjavceva, Ljudmila and Međo, Bojan",
year = "2022",
abstract = "This paper presents a part of development of a non-standard method for testing of cylindrical test specimens for measurement of fracture properties of pipeline materials. This method for testing of cylindrical structures working under pressure is based on determining of fracture mechanics parameters on SENT (Single Edge Notched Tension) specimens and new PRNT (Pipe Ring Notched Tension) specimens. In this work, both types of specimens required for this testing were manufactured from polyamide PA12 by using SLS (selective laser sintering) additive manufacturing method. Testing of the specimens is performed on the universal device for testing of mechanical properties of materials Shimadzu, AGS-X 100 kN. The tensile testing is accompanied by GOM Aramis 2M system, used for digital image correlation. By using these two systems, test results are obtained for ring-shaped and SENT specimens, including forces, displacements and fracture mechanics parameters CMOD (Crack Mouth Opening Displacement) and CTOD-δ5 (Crack Tip Opening Displacement obtained by δ5 technique), as well as crack growth. Repeatability of this process, along with valid result consistency, represent the basis for further development of the new method, including the determining of energy-based fracture mechanics parameters: J integral and stress intensity factor.",
publisher = "International Institute for the Science of Sintering (IISS)",
journal = "Science of Sintering",
title = "Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens",
pages = "386-373",
number = "3",
volume = "54",
doi = "10.2298/SOS2203373T"
}

Trajković, I., Milošević, M., Travica, M., Rakin, M., Mladenović, G., Kudrjavceva, L.,& Međo, B.. (2022). Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens. in Science of Sintering
International Institute for the Science of Sintering (IISS)., 54(3), 373-386.
https://doi.org/10.2298/SOS2203373T

Trajković I, Milošević M, Travica M, Rakin M, Mladenović G, Kudrjavceva L, Međo B. Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens. in Science of Sintering. 2022;54(3):373-386.
doi:10.2298/SOS2203373T .

Trajković, Isaak, Milošević, Miloš, Travica, Milan, Rakin, Marko, Mladenović, Goran, Kudrjavceva, Ljudmila, Međo, Bojan, "Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens" in Science of Sintering, 54, no. 3 (2022):373-386,
https://doi.org/10.2298/SOS2203373T . .

TY  - CONF
AU  - Trajković, Isaak
AU  - Milošević, Miloš
AU  - Travica, Milan
AU  - Rakin, Marko
AU  - Jevtić, Ivana
AU  - Sedmak, Aleksandar
AU  - Međo, Bojan
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6010
AB  - This work presents the fabrication and tensile testing of polyamide specimens fabricated by
selective laser sintering (SLS). Two geometries are considered: SENT (Single Edge Notched
Tension) and PRNT (Pipe Ring Notched Tension) specimens. Experimental testing of these
specimens is a step in development of a new method for testing of properties of the pipeline
materials. The samples were produced by SLS (Selective Laser Sintering) additive production
technique. The samples were made from polyamide PA12 on EOS Formiga P100 machine
(fabrication parameters: laser power 30 W, print layer height 0.1 mm, scanning speed 1.6-5
m/s, operating temperature 170⁰C). Testing was performed in the displacement control on a
universal tensile testing machine Shimadzu AGS - X. On this machine, the values of force as
well as the values of stress and strain were obtained directly from the Trapezium X software.
Special attention in this work is devoted to two important aspects: fixing of the ring specimen
for testing and influence of friction between the specimen and the tool. The results obtained
on the examined specimens indicate that this study is a valuable contribution for further
development and verification of the new fracture resistance testing procedure for different
pipeline materials.
PB  - Serbian Academy of Sciences and Arts
C3  - Serbian Ceramic Society Conference ADVANCED CERAMICS AND APPLICATION X New Frontiers in Multifunctional Material Science and Processing
T1  - Laser sintered polyamide specimens - fabrication and tensile testing conditions on different geometries
SP  - 80
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6010
ER  - 

@conference{
author = "Trajković, Isaak and Milošević, Miloš and Travica, Milan and Rakin, Marko and Jevtić, Ivana and Sedmak, Aleksandar and Međo, Bojan",
year = "2022",
abstract = "This work presents the fabrication and tensile testing of polyamide specimens fabricated by
selective laser sintering (SLS). Two geometries are considered: SENT (Single Edge Notched
Tension) and PRNT (Pipe Ring Notched Tension) specimens. Experimental testing of these
specimens is a step in development of a new method for testing of properties of the pipeline
materials. The samples were produced by SLS (Selective Laser Sintering) additive production
technique. The samples were made from polyamide PA12 on EOS Formiga P100 machine
(fabrication parameters: laser power 30 W, print layer height 0.1 mm, scanning speed 1.6-5
m/s, operating temperature 170⁰C). Testing was performed in the displacement control on a
universal tensile testing machine Shimadzu AGS - X. On this machine, the values of force as
well as the values of stress and strain were obtained directly from the Trapezium X software.
Special attention in this work is devoted to two important aspects: fixing of the ring specimen
for testing and influence of friction between the specimen and the tool. The results obtained
on the examined specimens indicate that this study is a valuable contribution for further
development and verification of the new fracture resistance testing procedure for different
pipeline materials.",
publisher = "Serbian Academy of Sciences and Arts",
journal = "Serbian Ceramic Society Conference ADVANCED CERAMICS AND APPLICATION X New Frontiers in Multifunctional Material Science and Processing",
title = "Laser sintered polyamide specimens - fabrication and tensile testing conditions on different geometries",
pages = "80",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6010"
}

Trajković, I., Milošević, M., Travica, M., Rakin, M., Jevtić, I., Sedmak, A.,& Međo, B.. (2022). Laser sintered polyamide specimens - fabrication and tensile testing conditions on different geometries. in Serbian Ceramic Society Conference ADVANCED CERAMICS AND APPLICATION X New Frontiers in Multifunctional Material Science and Processing
Serbian Academy of Sciences and Arts., 80.
https://hdl.handle.net/21.15107/rcub_technorep_6010

Trajković I, Milošević M, Travica M, Rakin M, Jevtić I, Sedmak A, Međo B. Laser sintered polyamide specimens - fabrication and tensile testing conditions on different geometries. in Serbian Ceramic Society Conference ADVANCED CERAMICS AND APPLICATION X New Frontiers in Multifunctional Material Science and Processing. 2022;:80.
https://hdl.handle.net/21.15107/rcub_technorep_6010 .

Trajković, Isaak, Milošević, Miloš, Travica, Milan, Rakin, Marko, Jevtić, Ivana, Sedmak, Aleksandar, Međo, Bojan, "Laser sintered polyamide specimens - fabrication and tensile testing conditions on different geometries" in Serbian Ceramic Society Conference ADVANCED CERAMICS AND APPLICATION X New Frontiers in Multifunctional Material Science and Processing (2022):80,
https://hdl.handle.net/21.15107/rcub_technorep_6010 .