TY  - JOUR
AU  - Potočnik, Jelena
AU  - Popović, Maja
AU  - Jokić, Bojan M.
AU  - Rakočević, Zlatko Lj.
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5912
AB  - In this work we investigated the influence of different deposition angles on the structural and magnetic properties of nickel thin films obtained by Glancing Angle Deposition. The films were deposited onto glass substrates at the angles of 65° and 85°. The structure of the films was studied by scanning electron microscopy, atomic force microscopy and X-ray diffraction, while the magnetic properties were analyzed using magneto-optical Kerr effect microscopy (MOKE). It was found that the variation in the deposition angle has a great influence on the porosity, crystallinity and surface roughness of the Ni films. The obtained changes in microstructure were correlated with the variation in the magnetic properties. MOKE measurements revealed that the thinner films, deposited at the angle of 85°, have a 2.5 times higher coercivity in comparison with the films deposited at the lower angle, which can be ascribed to their higher porosity. © 2019 Elsevier Ltd
T2  - Materials Research Bulletin
T1  - Tailoring the structural and magnetic properties of Ni zigzag nanostructures using different deposition angles
SP  - 110540
VL  - 119
DO  - 10.1016/j.materresbull.2019.110540
ER  - 

@article{
author = "Potočnik, Jelena and Popović, Maja and Jokić, Bojan M. and Rakočević, Zlatko Lj.",
year = "2019",
abstract = "In this work we investigated the influence of different deposition angles on the structural and magnetic properties of nickel thin films obtained by Glancing Angle Deposition. The films were deposited onto glass substrates at the angles of 65° and 85°. The structure of the films was studied by scanning electron microscopy, atomic force microscopy and X-ray diffraction, while the magnetic properties were analyzed using magneto-optical Kerr effect microscopy (MOKE). It was found that the variation in the deposition angle has a great influence on the porosity, crystallinity and surface roughness of the Ni films. The obtained changes in microstructure were correlated with the variation in the magnetic properties. MOKE measurements revealed that the thinner films, deposited at the angle of 85°, have a 2.5 times higher coercivity in comparison with the films deposited at the lower angle, which can be ascribed to their higher porosity. © 2019 Elsevier Ltd",
journal = "Materials Research Bulletin",
title = "Tailoring the structural and magnetic properties of Ni zigzag nanostructures using different deposition angles",
pages = "110540",
volume = "119",
doi = "10.1016/j.materresbull.2019.110540"
}

Potočnik, J., Popović, M., Jokić, B. M.,& Rakočević, Z. Lj.. (2019). Tailoring the structural and magnetic properties of Ni zigzag nanostructures using different deposition angles. in Materials Research Bulletin, 119, 110540.
https://doi.org/10.1016/j.materresbull.2019.110540

Potočnik J, Popović M, Jokić BM, Rakočević ZL. Tailoring the structural and magnetic properties of Ni zigzag nanostructures using different deposition angles. in Materials Research Bulletin. 2019;119:110540.
doi:10.1016/j.materresbull.2019.110540 .

Potočnik, Jelena, Popović, Maja, Jokić, Bojan M., Rakočević, Zlatko Lj., "Tailoring the structural and magnetic properties of Ni zigzag nanostructures using different deposition angles" in Materials Research Bulletin, 119 (2019):110540,
https://doi.org/10.1016/j.materresbull.2019.110540 . .

TY  - JOUR
AU  - Potočnik, Jelena
AU  - Nenadović, Miloš
AU  - Jokić, Bojan M.
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5836
AB  - Zig-zag structure of the nickel thin film has been obtained using Glancing Angle Deposition (GLAD) technique. Glass substrate was positioned 75 degrees with respect to the substrate normal. The obtained nickel thin film was characterized by X-ray Photoelectron Spectroscopy, Scanning Electron Microscopy and Atomic Force Microscopy. Surface energy of the deposited thin film was determined by measuring the contact angle using the static sessile drop method.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique
EP  - 56
IS  - 1
SP  - 51
VL  - 48
DO  - 10.2298/SOS1601051P
ER  - 

@article{
author = "Potočnik, Jelena and Nenadović, Miloš and Jokić, Bojan M. and Popović, Maja and Rakočević, Zlatko Lj.",
year = "2016",
abstract = "Zig-zag structure of the nickel thin film has been obtained using Glancing Angle Deposition (GLAD) technique. Glass substrate was positioned 75 degrees with respect to the substrate normal. The obtained nickel thin film was characterized by X-ray Photoelectron Spectroscopy, Scanning Electron Microscopy and Atomic Force Microscopy. Surface energy of the deposited thin film was determined by measuring the contact angle using the static sessile drop method.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique",
pages = "56-51",
number = "1",
volume = "48",
doi = "10.2298/SOS1601051P"
}

Potočnik, J., Nenadović, M., Jokić, B. M., Popović, M.,& Rakočević, Z. Lj.. (2016). Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 48(1), 51-56.
https://doi.org/10.2298/SOS1601051P

Potočnik J, Nenadović M, Jokić BM, Popović M, Rakočević ZL. Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique. in Science of Sintering. 2016;48(1):51-56.
doi:10.2298/SOS1601051P .

Potočnik, Jelena, Nenadović, Miloš, Jokić, Bojan M., Popović, Maja, Rakočević, Zlatko Lj., "Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique" in Science of Sintering, 48, no. 1 (2016):51-56,
https://doi.org/10.2298/SOS1601051P . .

TY  - JOUR
AU  - Potočnik, Jelena
AU  - Nenadović, Miloš
AU  - Bundaleski, Nenad
AU  - Jokić, Bojan M.
AU  - Mitrić, Miodrag
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5845
AB  - In this work, nickel (Ni) thin films were deposited by electron beam evaporation of Ni using Glancing Angle Deposition technique onto the glass substrate with the thickness varied from 25 nm to 150 nm. Characterization of obtained Ni films was performed by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and by Magneto-Optical Kerr effect measurements (MOKE). The effect of thickness on structural, chemical and magnetic properties of nickel films has been studied. Observed changes in microstructure were correlated with the variation in magnetic parameters obtained by MOKE measurements. It was found that for thinner Ni films, the enhancement of coercivity is due to the surface roughness of Ni films, while for thicker films the observed asymmetry of coercivity is due to the mechanism of column size growth. (C) 2016 Elsevier Ltd. All rights reserved.
T2  - Materials Research Bulletin
T1  - The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique
EP  - 461
SP  - 455
VL  - 84
DO  - 10.1016/j.materresbull.2016.08.044
ER  - 

@article{
author = "Potočnik, Jelena and Nenadović, Miloš and Bundaleski, Nenad and Jokić, Bojan M. and Mitrić, Miodrag and Popović, Maja and Rakočević, Zlatko Lj.",
year = "2016",
abstract = "In this work, nickel (Ni) thin films were deposited by electron beam evaporation of Ni using Glancing Angle Deposition technique onto the glass substrate with the thickness varied from 25 nm to 150 nm. Characterization of obtained Ni films was performed by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and by Magneto-Optical Kerr effect measurements (MOKE). The effect of thickness on structural, chemical and magnetic properties of nickel films has been studied. Observed changes in microstructure were correlated with the variation in magnetic parameters obtained by MOKE measurements. It was found that for thinner Ni films, the enhancement of coercivity is due to the surface roughness of Ni films, while for thicker films the observed asymmetry of coercivity is due to the mechanism of column size growth. (C) 2016 Elsevier Ltd. All rights reserved.",
journal = "Materials Research Bulletin",
title = "The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique",
pages = "461-455",
volume = "84",
doi = "10.1016/j.materresbull.2016.08.044"
}

Potočnik, J., Nenadović, M., Bundaleski, N., Jokić, B. M., Mitrić, M., Popović, M.,& Rakočević, Z. Lj.. (2016). The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique. in Materials Research Bulletin, 84, 455-461.
https://doi.org/10.1016/j.materresbull.2016.08.044

Potočnik J, Nenadović M, Bundaleski N, Jokić BM, Mitrić M, Popović M, Rakočević ZL. The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique. in Materials Research Bulletin. 2016;84:455-461.
doi:10.1016/j.materresbull.2016.08.044 .

Potočnik, Jelena, Nenadović, Miloš, Bundaleski, Nenad, Jokić, Bojan M., Mitrić, Miodrag, Popović, Maja, Rakočević, Zlatko Lj., "The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique" in Materials Research Bulletin, 84 (2016):455-461,
https://doi.org/10.1016/j.materresbull.2016.08.044 . .

TY  - JOUR
AU  - Nenadović, Miloš
AU  - Potočnik, Jelena
AU  - Ristic, M.
AU  - Štrbac, Svetlana
AU  - Rakočević, Zlatko Lj.
PY  - 2012
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5741
AB  - High density polyethylene (HDPE) has been modified by Ag+ and Au+ ion implantation with the energy of 60 and 200 keV, respectively. The doses of implanted silver and gold ions were as follows: 1 x 10(15), 5 x 10(15) and 1 x 10(16) ions/cm(2). The surface topography was observed using atomic force microscopy (AFM), while the surface composition changes were detected using phase imaging AFM. Phase analysis of AFM images shows that both physical and chemical changes occur on the surface of HDPE and that these changes depend on the nature of implanted ions and on the implantation dose. Silver ion implantation causes a higher degree of chemical changes, while the implantation of gold ions causes a higher degree of physical changes. Breakpoints were observed for the implantation doses of 0.6 x 10(15) and 4.4 x 10(15) ions/cm(2) for silver and gold ions, respectively. Physical changes are confirmed by the analysis of mean square roughness and power spectral density slopes as functions of the implantation dose. The position and half-width of peaks in histograms of phase AFM images confirmed the changes in surface composition.
PB  - Elsevier
T2  - Surface and Coatings Technology
T1  - Surface modification of polyethylene by Ag+ and Au+ ion implantation observed by phase imaging atomic force microscopy
EP  - 4248
IS  - 19-20
SP  - 4242
VL  - 206
DO  - 10.1016/j.surfcoat.2012.04.032
ER  - 

@article{
author = "Nenadović, Miloš and Potočnik, Jelena and Ristic, M. and Štrbac, Svetlana and Rakočević, Zlatko Lj.",
year = "2012",
abstract = "High density polyethylene (HDPE) has been modified by Ag+ and Au+ ion implantation with the energy of 60 and 200 keV, respectively. The doses of implanted silver and gold ions were as follows: 1 x 10(15), 5 x 10(15) and 1 x 10(16) ions/cm(2). The surface topography was observed using atomic force microscopy (AFM), while the surface composition changes were detected using phase imaging AFM. Phase analysis of AFM images shows that both physical and chemical changes occur on the surface of HDPE and that these changes depend on the nature of implanted ions and on the implantation dose. Silver ion implantation causes a higher degree of chemical changes, while the implantation of gold ions causes a higher degree of physical changes. Breakpoints were observed for the implantation doses of 0.6 x 10(15) and 4.4 x 10(15) ions/cm(2) for silver and gold ions, respectively. Physical changes are confirmed by the analysis of mean square roughness and power spectral density slopes as functions of the implantation dose. The position and half-width of peaks in histograms of phase AFM images confirmed the changes in surface composition.",
publisher = "Elsevier",
journal = "Surface and Coatings Technology",
title = "Surface modification of polyethylene by Ag+ and Au+ ion implantation observed by phase imaging atomic force microscopy",
pages = "4248-4242",
number = "19-20",
volume = "206",
doi = "10.1016/j.surfcoat.2012.04.032"
}

Nenadović, M., Potočnik, J., Ristic, M., Štrbac, S.,& Rakočević, Z. Lj.. (2012). Surface modification of polyethylene by Ag+ and Au+ ion implantation observed by phase imaging atomic force microscopy. in Surface and Coatings Technology
Elsevier., 206(19-20), 4242-4248.
https://doi.org/10.1016/j.surfcoat.2012.04.032

Nenadović M, Potočnik J, Ristic M, Štrbac S, Rakočević ZL. Surface modification of polyethylene by Ag+ and Au+ ion implantation observed by phase imaging atomic force microscopy. in Surface and Coatings Technology. 2012;206(19-20):4242-4248.
doi:10.1016/j.surfcoat.2012.04.032 .

Nenadović, Miloš, Potočnik, Jelena, Ristic, M., Štrbac, Svetlana, Rakočević, Zlatko Lj., "Surface modification of polyethylene by Ag+ and Au+ ion implantation observed by phase imaging atomic force microscopy" in Surface and Coatings Technology, 206, no. 19-20 (2012):4242-4248,
https://doi.org/10.1016/j.surfcoat.2012.04.032 . .

TY  - JOUR
AU  - Štrbac, Svetlana
AU  - Nenadović, Miloš
AU  - Rajaković, Ljubinka V.
AU  - Rakočević, Zlatko Lj.
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5588
AB  - High density polyethylene (HDPE) has been modified by Ag+ ion implantation with the energy of 60 keV. The total amount of implanted silver ions was 1, 5 and 12 x 10(15) ions/cm(2). The surface topography was observed by atomic forcemicroscopy (AFM), while the surface composition changes were detected using phase imaging AFM. Surface topography changes were studied in detail using 3D surface parameters analyses. The average roughness decreased for the implanted HDPE indicating the flattening of the surface. Phase AFM images indicated the homogenization of the polyethylene during ion implantation, while histogram analyses confirmed the change in surface composition.
PB  - Elsevier
T2  - Applied Surface Science
T1  - Chemical surface composition of the polyethylene implanted by Ag+ ions studied by phase imaging atomic force microscopy
EP  - 3899
IS  - 12
SP  - 3895
VL  - 256
DO  - 10.1016/j.apsusc.2010.01.046
ER  - 

@article{
author = "Štrbac, Svetlana and Nenadović, Miloš and Rajaković, Ljubinka V. and Rakočević, Zlatko Lj.",
year = "2010",
abstract = "High density polyethylene (HDPE) has been modified by Ag+ ion implantation with the energy of 60 keV. The total amount of implanted silver ions was 1, 5 and 12 x 10(15) ions/cm(2). The surface topography was observed by atomic forcemicroscopy (AFM), while the surface composition changes were detected using phase imaging AFM. Surface topography changes were studied in detail using 3D surface parameters analyses. The average roughness decreased for the implanted HDPE indicating the flattening of the surface. Phase AFM images indicated the homogenization of the polyethylene during ion implantation, while histogram analyses confirmed the change in surface composition.",
publisher = "Elsevier",
journal = "Applied Surface Science",
title = "Chemical surface composition of the polyethylene implanted by Ag+ ions studied by phase imaging atomic force microscopy",
pages = "3899-3895",
number = "12",
volume = "256",
doi = "10.1016/j.apsusc.2010.01.046"
}

Štrbac, S., Nenadović, M., Rajaković, L. V.,& Rakočević, Z. Lj.. (2010). Chemical surface composition of the polyethylene implanted by Ag+ ions studied by phase imaging atomic force microscopy. in Applied Surface Science
Elsevier., 256(12), 3895-3899.
https://doi.org/10.1016/j.apsusc.2010.01.046

Štrbac S, Nenadović M, Rajaković LV, Rakočević ZL. Chemical surface composition of the polyethylene implanted by Ag+ ions studied by phase imaging atomic force microscopy. in Applied Surface Science. 2010;256(12):3895-3899.
doi:10.1016/j.apsusc.2010.01.046 .

Štrbac, Svetlana, Nenadović, Miloš, Rajaković, Ljubinka V., Rakočević, Zlatko Lj., "Chemical surface composition of the polyethylene implanted by Ag+ ions studied by phase imaging atomic force microscopy" in Applied Surface Science, 256, no. 12 (2010):3895-3899,
https://doi.org/10.1016/j.apsusc.2010.01.046 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Rakočević, Zlatko Lj.
AU  - Popov, Konstantin I.
PY  - 2004
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5410
AB  - Reflection and structural analyses of different copper and zinc coatings were performed. The copper coatings were electrodeposited from a sulfate solution in the presence of thiourea, as well as in the presence of modified polyglycol ether, PEG 6000 and 3-mercaptopropanesulfonate.The zinc coating was electrodeposited from a sulfate solution in the presence of a dextrin/salicylaldehyde mixture. They were examined by STM and X-ray diffraction analysis, and measurements of the reflection of light from their surfaces were taken. The mean sizes of atomically flat parts of these surfaces were estimated by the STM software measurements,using options for the determination of the autocovariance function and the power spectral densityfunction. It was shown that the mean sizes of atomically flat parts of the copper coatings were several times greater than the mean size of atomically flat parts of the zinc coating. This difference probably leads to the difference in the maximum degrees of mirror reflection between copper and zinc coatings.
PB  - Springer
T2  - Journal of Solid State Electrochemistry
T1  - Reflection and structural analyses of mirror-bright metal coatings
EP  - 531
SP  - 526
VL  - 8
DO  - 10.1007/s10008-003-0467-8
ER  - 

@article{
author = "Nikolić, Nebojša D. and Rakočević, Zlatko Lj. and Popov, Konstantin I.",
year = "2004",
abstract = "Reflection and structural analyses of different copper and zinc coatings were performed. The copper coatings were electrodeposited from a sulfate solution in the presence of thiourea, as well as in the presence of modified polyglycol ether, PEG 6000 and 3-mercaptopropanesulfonate.The zinc coating was electrodeposited from a sulfate solution in the presence of a dextrin/salicylaldehyde mixture. They were examined by STM and X-ray diffraction analysis, and measurements of the reflection of light from their surfaces were taken. The mean sizes of atomically flat parts of these surfaces were estimated by the STM software measurements,using options for the determination of the autocovariance function and the power spectral densityfunction. It was shown that the mean sizes of atomically flat parts of the copper coatings were several times greater than the mean size of atomically flat parts of the zinc coating. This difference probably leads to the difference in the maximum degrees of mirror reflection between copper and zinc coatings.",
publisher = "Springer",
journal = "Journal of Solid State Electrochemistry",
title = "Reflection and structural analyses of mirror-bright metal coatings",
pages = "531-526",
volume = "8",
doi = "10.1007/s10008-003-0467-8"
}

Nikolić, N. D., Rakočević, Z. Lj.,& Popov, K. I.. (2004). Reflection and structural analyses of mirror-bright metal coatings. in Journal of Solid State Electrochemistry
Springer., 8, 526-531.
https://doi.org/10.1007/s10008-003-0467-8

Nikolić ND, Rakočević ZL, Popov KI. Reflection and structural analyses of mirror-bright metal coatings. in Journal of Solid State Electrochemistry. 2004;8:526-531.
doi:10.1007/s10008-003-0467-8 .

Nikolić, Nebojša D., Rakočević, Zlatko Lj., Popov, Konstantin I., "Reflection and structural analyses of mirror-bright metal coatings" in Journal of Solid State Electrochemistry, 8 (2004):526-531,
https://doi.org/10.1007/s10008-003-0467-8 . .

TY  - JOUR
AU  - Nikolic, N.D.
AU  - Rakočević, Zlatko Lj.
AU  - Durovic, D.R.
AU  - Popov, K.I.
PY  - 2002
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5380
AB  - The reflection and structural characteristics of the nickel coatings obtained in the presence of a basic brightening addition agent only, and of both a basic and top brightening, addition agent arc examined. It is shown that the nickel coating obtained in the presence of both a basic and top brightening addition agent fulfilled the conditions to be characterized as a mirror bright metal surface. The nickel coating obtained in the presence of a basic brightening, addition agent only is characterized as a semi-bright metal surface.
T2  - Journal of the Serbian Chemical Society
T1  - Reflection and structural characteristics of semi-bright and mirror bright nickel coatings
EP  - 443
IS  - 6
SP  - 437
VL  - 67
DO  - 10.2298/JSC0206437N
ER  - 

@article{
author = "Nikolic, N.D. and Rakočević, Zlatko Lj. and Durovic, D.R. and Popov, K.I.",
year = "2002",
abstract = "The reflection and structural characteristics of the nickel coatings obtained in the presence of a basic brightening addition agent only, and of both a basic and top brightening, addition agent arc examined. It is shown that the nickel coating obtained in the presence of both a basic and top brightening addition agent fulfilled the conditions to be characterized as a mirror bright metal surface. The nickel coating obtained in the presence of a basic brightening, addition agent only is characterized as a semi-bright metal surface.",
journal = "Journal of the Serbian Chemical Society",
title = "Reflection and structural characteristics of semi-bright and mirror bright nickel coatings",
pages = "443-437",
number = "6",
volume = "67",
doi = "10.2298/JSC0206437N"
}

Nikolic, N.D., Rakočević, Z. Lj., Durovic, D.R.,& Popov, K.I.. (2002). Reflection and structural characteristics of semi-bright and mirror bright nickel coatings. in Journal of the Serbian Chemical Society, 67(6), 437-443.
https://doi.org/10.2298/JSC0206437N

Nikolic N, Rakočević ZL, Durovic D, Popov K. Reflection and structural characteristics of semi-bright and mirror bright nickel coatings. in Journal of the Serbian Chemical Society. 2002;67(6):437-443.
doi:10.2298/JSC0206437N .

Nikolic, N.D., Rakočević, Zlatko Lj., Durovic, D.R., Popov, K.I., "Reflection and structural characteristics of semi-bright and mirror bright nickel coatings" in Journal of the Serbian Chemical Society, 67, no. 6 (2002):437-443,
https://doi.org/10.2298/JSC0206437N . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Nikolić, Nebojša D.
AU  - Rakočević, Zlatko Lj.
PY  - 2002
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5376
AB  - Apossible way for the estimation of the interfacial energy of the copper – copper sulphate solution interface is proposed. The estimated value of (2.7±0.3) J cm-2 and the derived equations which relate the specific surface of copper powder to the deposition conditions permit an estimation of the specific surface of copper powderc The agreement between the estimated value and literature data is very good.
AB  - Predložen je mogući način za procenu međupovršinske energije bakar – rastvor bakar sulfata. Procenjena vrednost od (2,7±0,3) J cm-2 i izvedene jednačine koje povezuju specifičnu površinu bakarnog praha i uslova taloženja dozvoljavaju procenu specifične površine bakarnog praha. Slaganje između procenjene vrednosti i literaturnih podataka je veoma dobro.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder
T1  - Procena međupovršinske energije bakar-rastvor bakar sulfata i specifične površine bakarnog praha
EP  - 638
IS  - 8-9
SP  - 635
VL  - 67
DO  - 10.2298/JSC0209635P
ER  - 

@article{
author = "Popov, Konstantin I. and Nikolić, Nebojša D. and Rakočević, Zlatko Lj.",
year = "2002",
abstract = "Apossible way for the estimation of the interfacial energy of the copper – copper sulphate solution interface is proposed. The estimated value of (2.7±0.3) J cm-2 and the derived equations which relate the specific surface of copper powder to the deposition conditions permit an estimation of the specific surface of copper powderc The agreement between the estimated value and literature data is very good., Predložen je mogući način za procenu međupovršinske energije bakar – rastvor bakar sulfata. Procenjena vrednost od (2,7±0,3) J cm-2 i izvedene jednačine koje povezuju specifičnu površinu bakarnog praha i uslova taloženja dozvoljavaju procenu specifične površine bakarnog praha. Slaganje između procenjene vrednosti i literaturnih podataka je veoma dobro.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder, Procena međupovršinske energije bakar-rastvor bakar sulfata i specifične površine bakarnog praha",
pages = "638-635",
number = "8-9",
volume = "67",
doi = "10.2298/JSC0209635P"
}

Popov, K. I., Nikolić, N. D.,& Rakočević, Z. Lj.. (2002). An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 67(8-9), 635-638.
https://doi.org/10.2298/JSC0209635P

Popov KI, Nikolić ND, Rakočević ZL. An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder. in Journal of the Serbian Chemical Society. 2002;67(8-9):635-638.
doi:10.2298/JSC0209635P .

Popov, Konstantin I., Nikolić, Nebojša D., Rakočević, Zlatko Lj., "An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder" in Journal of the Serbian Chemical Society, 67, no. 8-9 (2002):635-638,
https://doi.org/10.2298/JSC0209635P . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Novaković, Goran
AU  - Rakočević, Zlatko Lj.
AU  - Đurović, Dejan
AU  - Popov, Konstantin I.
PY  - 2002
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5366
AB  - Reflection and structural analyses of different copper and zinc coatings were performed. The coatings of copper obtained were from acid sulfate solutions in the absence and presence of thiourea. The coatings of zinc were obtained from acid sulfate solutions in the absence and presence of dextrin and furfural. They were examined by STM, X-ray diffraction (XRD) analysis, and measurements of the reflection of light from their surfaces were taken. Reflection of light from zinc and copper coatings obtained from corresponding pure sulfate solutions was mostly diffuse reflection. The copper coating obtained in the presence of thiourea and the zinc coating obtained in the presence of dextrin and furfural showed a high degree of mirror reflection, and based on structural analysis are characterised as mirror bright metal surfaces.
PB  - Elsevier
T2  - Surface and Coatings Technology
T1  - Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives
EP  - 194
IS  - 2-3
SP  - 188
VL  - 161
DO  - 10.1016/S0257-8972(02)00517-0
ER  - 

@article{
author = "Nikolić, Nebojša D. and Novaković, Goran and Rakočević, Zlatko Lj. and Đurović, Dejan and Popov, Konstantin I.",
year = "2002",
abstract = "Reflection and structural analyses of different copper and zinc coatings were performed. The coatings of copper obtained were from acid sulfate solutions in the absence and presence of thiourea. The coatings of zinc were obtained from acid sulfate solutions in the absence and presence of dextrin and furfural. They were examined by STM, X-ray diffraction (XRD) analysis, and measurements of the reflection of light from their surfaces were taken. Reflection of light from zinc and copper coatings obtained from corresponding pure sulfate solutions was mostly diffuse reflection. The copper coating obtained in the presence of thiourea and the zinc coating obtained in the presence of dextrin and furfural showed a high degree of mirror reflection, and based on structural analysis are characterised as mirror bright metal surfaces.",
publisher = "Elsevier",
journal = "Surface and Coatings Technology",
title = "Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives",
pages = "194-188",
number = "2-3",
volume = "161",
doi = "10.1016/S0257-8972(02)00517-0"
}

Nikolić, N. D., Novaković, G., Rakočević, Z. Lj., Đurović, D.,& Popov, K. I.. (2002). Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives. in Surface and Coatings Technology
Elsevier., 161(2-3), 188-194.
https://doi.org/10.1016/S0257-8972(02)00517-0

Nikolić ND, Novaković G, Rakočević ZL, Đurović D, Popov KI. Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives. in Surface and Coatings Technology. 2002;161(2-3):188-194.
doi:10.1016/S0257-8972(02)00517-0 .

Nikolić, Nebojša D., Novaković, Goran, Rakočević, Zlatko Lj., Đurović, Dejan, Popov, Konstantin I., "Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives" in Surface and Coatings Technology, 161, no. 2-3 (2002):188-194,
https://doi.org/10.1016/S0257-8972(02)00517-0 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Rakočević, Zlatko Lj.
AU  - Popov, Konstantin I.
PY  - 2001
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5344
AB  - In this work, the structure of a silver mirror surface was examined by the STM technique. It was shown that the structural characteristics which enable a high degree of mirror reflection from this surface, which is very close to the ideal reflectivity of silver, are: flat and mutually parallel parts of the surface which are smooth on the atomic level, and distances between adjacent flat parts which state several atomic diameters.
AB  - STM tehnikom je ispitana struktura površine srebrnog ogledala. Pokazano je da su strukturne karakteristike koje su omogućile visok stepen ogledalske refleksije koji je bio veoma blizak idealnoj refleksivnosti srebra: ravni i međusobno paralelni delovi površine koji su glatki na atomskom nivou, i rastojanja između susednih ravnih delova koja iznose nekoliko atomskih prečnika.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The STM analysis of a silver mirror surface
T1  - STM analiza površine srebrnog ogledala
EP  - 727
IS  - 10
SP  - 723
VL  - 66
UR  - https://hdl.handle.net/21.15107/rcub_cer_42
ER  - 

@article{
author = "Nikolić, Nebojša D. and Rakočević, Zlatko Lj. and Popov, Konstantin I.",
year = "2001",
abstract = "In this work, the structure of a silver mirror surface was examined by the STM technique. It was shown that the structural characteristics which enable a high degree of mirror reflection from this surface, which is very close to the ideal reflectivity of silver, are: flat and mutually parallel parts of the surface which are smooth on the atomic level, and distances between adjacent flat parts which state several atomic diameters., STM tehnikom je ispitana struktura površine srebrnog ogledala. Pokazano je da su strukturne karakteristike koje su omogućile visok stepen ogledalske refleksije koji je bio veoma blizak idealnoj refleksivnosti srebra: ravni i međusobno paralelni delovi površine koji su glatki na atomskom nivou, i rastojanja između susednih ravnih delova koja iznose nekoliko atomskih prečnika.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The STM analysis of a silver mirror surface, STM analiza površine srebrnog ogledala",
pages = "727-723",
number = "10",
volume = "66",
url = "https://hdl.handle.net/21.15107/rcub_cer_42"
}

Nikolić, N. D., Rakočević, Z. Lj.,& Popov, K. I.. (2001). The STM analysis of a silver mirror surface. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 66(10), 723-727.
https://hdl.handle.net/21.15107/rcub_cer_42

Nikolić ND, Rakočević ZL, Popov KI. The STM analysis of a silver mirror surface. in Journal of the Serbian Chemical Society. 2001;66(10):723-727.
https://hdl.handle.net/21.15107/rcub_cer_42 .

Nikolić, Nebojša D., Rakočević, Zlatko Lj., Popov, Konstantin I., "The STM analysis of a silver mirror surface" in Journal of the Serbian Chemical Society, 66, no. 10 (2001):723-727,
https://hdl.handle.net/21.15107/rcub_cer_42 .