Milanović, P., Grujić, D., Nedeljković, D., Stanković, S., Novaković, M.,& Milanović, J.. (2022). Konstrukcija automatizovanog uređaja za određivanje kapilarnosti tekstilnih i kompozitnih materijala primenom „open-source“ principa. .
https://hdl.handle.net/21.15107/rcub_technorep_6968

Milanović P, Grujić D, Nedeljković D, Stanković S, Novaković M, Milanović J. Konstrukcija automatizovanog uređaja za određivanje kapilarnosti tekstilnih i kompozitnih materijala primenom „open-source“ principa. 2022;.
https://hdl.handle.net/21.15107/rcub_technorep_6968 .

Milanović, Predrag, Grujić, Dragana, Nedeljković, Dragutin, Stanković, Snežana, Novaković, Milada, Milanović, Jovana, "Konstrukcija automatizovanog uređaja za određivanje kapilarnosti tekstilnih i kompozitnih materijala primenom „open-source“ principa" (2022),
https://hdl.handle.net/21.15107/rcub_technorep_6968 .

TY  - JOUR
AU  - Novaković, Milada
AU  - Popović, Dušan M.
AU  - Mladenović, Nenad
AU  - Poparić, Goran B.
AU  - Stanković, Snežana
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4499
AB  - Considering specific mechanical, hygienic and protective properties of hemp, as well as its positive
sustainability aspects, the raising role of hemp fibres in the textile sector can be expected. The limited
deformability of hemp fibres, which has a negative influence on the tactile comfort, can be overcome by
blending them with other soft fibres. In this project, an attempt was made to overcome this limitation by
blending them with soft and warm acrylic fibres so as to avoid any chemical treatments with softeners.
The composition of the knitted fabrics was designed at the knitting production stage, offering the
knitwear factories a new possibility for fibre blending. The produced single jersey knitted fabrics were
evaluated in terms of their thermal behaviour in both steady-state and transient conditions. Since this
type of knitted fabrics is prone to dimensional changes and distortion upon repeated laundering, the
undershirts made thereof were subjected to the wear trial test (repeated wear and care cycles) in real life
situations, in order to assess changes in the thermal properties of the knitted fabrics. Observed changes
in the geometry of the knitted fabrics and morphology of the fibres after a period of wear and care of the
undershirts have had positive effects on the thermal properties of the hemp based knits. Hemp/acrylic
knitted fabric has undergone the biggest change in the geometry, but moderate change in thermal
properties comparing to those of the hemp knit. The values of thermal parameters of the hemp/acrylic
knit after repeated wear and care cycles which were in the range of those of the hemp knit before the
wear trial test, confirmed that the hemp-blend proposed by this study would follow the trend of good
hemp thermal behaviour in terms of comfort at the exploitation stage. The presented results offer a
product design strategy to increase the performance, economic and environmental benefits for both the
producers and consumers.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of Cleaner Production
T1  - Development of comfortable and eco-friendly cellulose based textiles with improved sustainability
VL  - 267
DO  - 10.1016/j.jclepro.2020.122154
ER  - 

@article{
author = "Novaković, Milada and Popović, Dušan M. and Mladenović, Nenad and Poparić, Goran B. and Stanković, Snežana",
year = "2020",
abstract = "Considering specific mechanical, hygienic and protective properties of hemp, as well as its positive
sustainability aspects, the raising role of hemp fibres in the textile sector can be expected. The limited
deformability of hemp fibres, which has a negative influence on the tactile comfort, can be overcome by
blending them with other soft fibres. In this project, an attempt was made to overcome this limitation by
blending them with soft and warm acrylic fibres so as to avoid any chemical treatments with softeners.
The composition of the knitted fabrics was designed at the knitting production stage, offering the
knitwear factories a new possibility for fibre blending. The produced single jersey knitted fabrics were
evaluated in terms of their thermal behaviour in both steady-state and transient conditions. Since this
type of knitted fabrics is prone to dimensional changes and distortion upon repeated laundering, the
undershirts made thereof were subjected to the wear trial test (repeated wear and care cycles) in real life
situations, in order to assess changes in the thermal properties of the knitted fabrics. Observed changes
in the geometry of the knitted fabrics and morphology of the fibres after a period of wear and care of the
undershirts have had positive effects on the thermal properties of the hemp based knits. Hemp/acrylic
knitted fabric has undergone the biggest change in the geometry, but moderate change in thermal
properties comparing to those of the hemp knit. The values of thermal parameters of the hemp/acrylic
knit after repeated wear and care cycles which were in the range of those of the hemp knit before the
wear trial test, confirmed that the hemp-blend proposed by this study would follow the trend of good
hemp thermal behaviour in terms of comfort at the exploitation stage. The presented results offer a
product design strategy to increase the performance, economic and environmental benefits for both the
producers and consumers.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of Cleaner Production",
title = "Development of comfortable and eco-friendly cellulose based textiles with improved sustainability",
volume = "267",
doi = "10.1016/j.jclepro.2020.122154"
}

Novaković, M., Popović, D. M., Mladenović, N., Poparić, G. B.,& Stanković, S.. (2020). Development of comfortable and eco-friendly cellulose based textiles with improved sustainability. in Journal of Cleaner Production
Elsevier Sci Ltd, Oxford., 267.
https://doi.org/10.1016/j.jclepro.2020.122154

Novaković M, Popović DM, Mladenović N, Poparić GB, Stanković S. Development of comfortable and eco-friendly cellulose based textiles with improved sustainability. in Journal of Cleaner Production. 2020;267.
doi:10.1016/j.jclepro.2020.122154 .

Novaković, Milada, Popović, Dušan M., Mladenović, Nenad, Poparić, Goran B., Stanković, Snežana, "Development of comfortable and eco-friendly cellulose based textiles with improved sustainability" in Journal of Cleaner Production, 267 (2020),
https://doi.org/10.1016/j.jclepro.2020.122154 . .

TY  - JOUR
AU  - Stanković, Snežana
AU  - Novaković, Milada
AU  - Popović, Dušan M.
AU  - Poparić, Goran B.
AU  - Bizjak, Matejka
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4229
AB  - The aim of this research was to investigate the possibilities of producing comfort hemp containing textile fabrics by assembling a pure hemp yarn with other-fibre containing yarn. The plain knitted fabrics were produced from two-assembled hemp and three variants of cotton yarns which differed in twist level, all having the same linear density. The transport properties (air permeability, water vapour permeability and thermal resistance) of the hemp-based knitted fabrics were quantitatively analysed. The results obtained demonstrated that the introduction of cotton into hemp-based textiles reduces air and water vapour permeability with the downward trend in thermal resistance. The extent to which the transport properties varied among the hemp/cotton knitted fabrics was dependent on the twist intensity of the cotton yarns. Therefore, the yarn assembling technique is an effective way not only to combine different fibre properties but to take advantage of intrinsic properties of component yarns.
PB  - Taylor & Francis Ltd, Abingdon
T2  - Journal of the Textile Institute
T1  - Novel engineering approach to optimization of thermal comfort properties of hemp containing textiles
EP  - 1279
IS  - 9
SP  - 1271
VL  - 110
DO  - 10.1080/00405000.2018.1557367
ER  - 

@article{
author = "Stanković, Snežana and Novaković, Milada and Popović, Dušan M. and Poparić, Goran B. and Bizjak, Matejka",
year = "2019",
abstract = "The aim of this research was to investigate the possibilities of producing comfort hemp containing textile fabrics by assembling a pure hemp yarn with other-fibre containing yarn. The plain knitted fabrics were produced from two-assembled hemp and three variants of cotton yarns which differed in twist level, all having the same linear density. The transport properties (air permeability, water vapour permeability and thermal resistance) of the hemp-based knitted fabrics were quantitatively analysed. The results obtained demonstrated that the introduction of cotton into hemp-based textiles reduces air and water vapour permeability with the downward trend in thermal resistance. The extent to which the transport properties varied among the hemp/cotton knitted fabrics was dependent on the twist intensity of the cotton yarns. Therefore, the yarn assembling technique is an effective way not only to combine different fibre properties but to take advantage of intrinsic properties of component yarns.",
publisher = "Taylor & Francis Ltd, Abingdon",
journal = "Journal of the Textile Institute",
title = "Novel engineering approach to optimization of thermal comfort properties of hemp containing textiles",
pages = "1279-1271",
number = "9",
volume = "110",
doi = "10.1080/00405000.2018.1557367"
}

Stanković, S., Novaković, M., Popović, D. M., Poparić, G. B.,& Bizjak, M.. (2019). Novel engineering approach to optimization of thermal comfort properties of hemp containing textiles. in Journal of the Textile Institute
Taylor & Francis Ltd, Abingdon., 110(9), 1271-1279.
https://doi.org/10.1080/00405000.2018.1557367

Stanković S, Novaković M, Popović DM, Poparić GB, Bizjak M. Novel engineering approach to optimization of thermal comfort properties of hemp containing textiles. in Journal of the Textile Institute. 2019;110(9):1271-1279.
doi:10.1080/00405000.2018.1557367 .

Stanković, Snežana, Novaković, Milada, Popović, Dušan M., Poparić, Goran B., Bizjak, Matejka, "Novel engineering approach to optimization of thermal comfort properties of hemp containing textiles" in Journal of the Textile Institute, 110, no. 9 (2019):1271-1279,
https://doi.org/10.1080/00405000.2018.1557367 . .

TY  - JOUR
AU  - Novaković, Milada
AU  - Bizjak, Matejka
AU  - Stanković, Snežana
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2328
AB  - As general concern for personal wellbeing and quality of life nowadays becomes exceptionally significant, the importance of clothing comfort is well recognized by the public. Thermal comfort relates to the ability of the clothing materials to support the thermoregulation system of the body to keep its temperature at the mean value. The overall purpose of a textile designer is to design and produce a clothing item which at the same time has to be comfortable and pleasant in look. The main objective of this paper is to indicate the possible directions of providing satisfactory thermal comfort of knitted fabrics by optimizing their structure. In this investigation, the range of knitted fabrics differing in structure was obtained by using yarns with various structure and fiber composition and by varying in construction parameters of the knits. Transport properties (transfer of heat, air and water) of the knitted fabrics were investigated. The results obtained confirmed the possibility of achieving desired thermal comfort by the adequate selection of yarn's and fabric's structure.
AB  - Značajan porast svesti o ličnoj dobrobiti i potrebi unapređenja kvaliteta života doveo je do toga da važnost komfora odeće bude prepoznata od strane javnosti. Toplotni komfor se odnosi na sposobnost odeće da potpomaže čovekov termoregulacioni sistem u održavanju odgovarajuće temperature tela. Generalni zadatak tekstilnog inženjera je da dizajnira i proizvede odevni predmet koji istovremeno treba da zadovolji komfor i estetska svojstva. Osnovni cilj ovog rada je bio da ukaže na moguće pravce obezbeđivanja zadovoljavajućih svojstava toplotnog komfora pletenina putem optimizacije njihove strukture. Različite strukture pletenina su u okviru ovog istraživanja omogućene upotrebom pređa različitog sirovinskog sastava i strukture, uz variranje konstrukcionih parametara pletenina. Ispitivana je sposobnost pletenina da prenose toplotu i propuštaju vazduh i vodenu paru. Dobijeni rezultati su pokazali da se adekvatnim izborom strukture pređe i pletenine mogu modifikovati svojstva toplotnog komfora pletenina u željenom pravcu.
PB  - Union of Textile Engineers and Technicians of Serbia, Belgrade
T2  - Tekstilna industrija
T1  - Knitted fabrics design impact on optimal thermal comfort
T1  - Dizajn pletenina u funkciji optimalnog toplotnog komfora
EP  - 36
IS  - 1
SP  - 30
VL  - 61
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2328
ER  - 

@article{
author = "Novaković, Milada and Bizjak, Matejka and Stanković, Snežana",
year = "2013",
abstract = "As general concern for personal wellbeing and quality of life nowadays becomes exceptionally significant, the importance of clothing comfort is well recognized by the public. Thermal comfort relates to the ability of the clothing materials to support the thermoregulation system of the body to keep its temperature at the mean value. The overall purpose of a textile designer is to design and produce a clothing item which at the same time has to be comfortable and pleasant in look. The main objective of this paper is to indicate the possible directions of providing satisfactory thermal comfort of knitted fabrics by optimizing their structure. In this investigation, the range of knitted fabrics differing in structure was obtained by using yarns with various structure and fiber composition and by varying in construction parameters of the knits. Transport properties (transfer of heat, air and water) of the knitted fabrics were investigated. The results obtained confirmed the possibility of achieving desired thermal comfort by the adequate selection of yarn's and fabric's structure., Značajan porast svesti o ličnoj dobrobiti i potrebi unapređenja kvaliteta života doveo je do toga da važnost komfora odeće bude prepoznata od strane javnosti. Toplotni komfor se odnosi na sposobnost odeće da potpomaže čovekov termoregulacioni sistem u održavanju odgovarajuće temperature tela. Generalni zadatak tekstilnog inženjera je da dizajnira i proizvede odevni predmet koji istovremeno treba da zadovolji komfor i estetska svojstva. Osnovni cilj ovog rada je bio da ukaže na moguće pravce obezbeđivanja zadovoljavajućih svojstava toplotnog komfora pletenina putem optimizacije njihove strukture. Različite strukture pletenina su u okviru ovog istraživanja omogućene upotrebom pređa različitog sirovinskog sastava i strukture, uz variranje konstrukcionih parametara pletenina. Ispitivana je sposobnost pletenina da prenose toplotu i propuštaju vazduh i vodenu paru. Dobijeni rezultati su pokazali da se adekvatnim izborom strukture pređe i pletenine mogu modifikovati svojstva toplotnog komfora pletenina u željenom pravcu.",
publisher = "Union of Textile Engineers and Technicians of Serbia, Belgrade",
journal = "Tekstilna industrija",
title = "Knitted fabrics design impact on optimal thermal comfort, Dizajn pletenina u funkciji optimalnog toplotnog komfora",
pages = "36-30",
number = "1",
volume = "61",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2328"
}

Novaković, M., Bizjak, M.,& Stanković, S.. (2013). Knitted fabrics design impact on optimal thermal comfort. in Tekstilna industrija
Union of Textile Engineers and Technicians of Serbia, Belgrade., 61(1), 30-36.
https://hdl.handle.net/21.15107/rcub_technorep_2328

Novaković M, Bizjak M, Stanković S. Knitted fabrics design impact on optimal thermal comfort. in Tekstilna industrija. 2013;61(1):30-36.
https://hdl.handle.net/21.15107/rcub_technorep_2328 .

Novaković, Milada, Bizjak, Matejka, Stanković, Snežana, "Knitted fabrics design impact on optimal thermal comfort" in Tekstilna industrija, 61, no. 1 (2013):30-36,
https://hdl.handle.net/21.15107/rcub_technorep_2328 .

TY  - JOUR
AU  - Novaković, Milada
AU  - Bizjak, Matejka
AU  - Stanković, Snežana
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2321
AB  - Water vapor permeability is a critical parameter in textile fabric comfort evaluation as it represents the ability of the fabric to transfer perspiration coming out of the human body. Clothing materials with high water vapor permeability allow the human body to take advantage of its ability to provide cooling due to the sweat production and evaporation. The influence of several factors such as the fabric structure, thickness, porosity and fiber type on water vapor permeability of common clothing materials was observed by previous researchers. The main objective of this study was to analyze the influence of yarn properties on water vapor permeability of plain knitted fabrics. The range of various yarn structures was obtained by applying different twist intensity during spinning. From three various twisted cotton yarns the knitted fabrics were produced under controlled conditions. Water vapor permeability and air permeability of the knitted fabrics were measured. The results obtained indicated the complex impact of the yarn core and surface geometry on water vapor permeability of plain knitted fabrics. The hairiness of yarn was proved as the parameter with great potential in terms of the water vapor transfer.
AB  - Propustljivost vodene pare je jedan od ključnih parametara u proceni komfora tekstilnog materijala, budući da definiše materijal u pogledu sposobnosti da propušta produkte znojenja ljudskog tela. Odevni tekstilni materijal sa većom propustljivošću vodene pare ne ometa efekte hlađenja ljudskog organizma putem znojenja i isparavanja znoja. Predmet interesovanja dosadašnjih istraživanja odnosio se na uticaj strukture, debljine, poroznosti materijala kao i vrste vlakana na propustljivost vodene pare. Osnovni cilj ovog rada bio je analiza uticaja svojstava pređe na propustljivost vodene pare glatkih pletenina. Različita struktura pređa je ostvarena primenom različitog intenziteta upredanja. Polazeći od tri različito upredene pamučne pređe u kontrolisanim uslovima su proizvedene glatke pletenine koje su podvrgnute ispitivanju propustljivosti vodene pare i vazduha. Dobijeni rezultati su ukazali na kompleksan uticaj koji geometrija jezgra i površine pređe imaju na propustljivost vodene pare glatkih pletenina. Pokazalo se da maljavost pređe predstavlja parametar koji ima veliki potencijal u pogledu prenosa vodene pare kroz tekstilne materijale.
PB  - Univerzitet u Nišu - Tehnološki fakultet, Leskovac
T2  - Savremene tehnologije
T1  - Influence of yarn structure on water vapor permeability of plain knitted fabrics
T1  - Uticaj strukture pređe na propustljivost vodene pare glatkih pletenina
EP  - 20
IS  - 2
SP  - 15
VL  - 2
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2321
ER  - 

@article{
author = "Novaković, Milada and Bizjak, Matejka and Stanković, Snežana",
year = "2013",
abstract = "Water vapor permeability is a critical parameter in textile fabric comfort evaluation as it represents the ability of the fabric to transfer perspiration coming out of the human body. Clothing materials with high water vapor permeability allow the human body to take advantage of its ability to provide cooling due to the sweat production and evaporation. The influence of several factors such as the fabric structure, thickness, porosity and fiber type on water vapor permeability of common clothing materials was observed by previous researchers. The main objective of this study was to analyze the influence of yarn properties on water vapor permeability of plain knitted fabrics. The range of various yarn structures was obtained by applying different twist intensity during spinning. From three various twisted cotton yarns the knitted fabrics were produced under controlled conditions. Water vapor permeability and air permeability of the knitted fabrics were measured. The results obtained indicated the complex impact of the yarn core and surface geometry on water vapor permeability of plain knitted fabrics. The hairiness of yarn was proved as the parameter with great potential in terms of the water vapor transfer., Propustljivost vodene pare je jedan od ključnih parametara u proceni komfora tekstilnog materijala, budući da definiše materijal u pogledu sposobnosti da propušta produkte znojenja ljudskog tela. Odevni tekstilni materijal sa većom propustljivošću vodene pare ne ometa efekte hlađenja ljudskog organizma putem znojenja i isparavanja znoja. Predmet interesovanja dosadašnjih istraživanja odnosio se na uticaj strukture, debljine, poroznosti materijala kao i vrste vlakana na propustljivost vodene pare. Osnovni cilj ovog rada bio je analiza uticaja svojstava pređe na propustljivost vodene pare glatkih pletenina. Različita struktura pređa je ostvarena primenom različitog intenziteta upredanja. Polazeći od tri različito upredene pamučne pređe u kontrolisanim uslovima su proizvedene glatke pletenine koje su podvrgnute ispitivanju propustljivosti vodene pare i vazduha. Dobijeni rezultati su ukazali na kompleksan uticaj koji geometrija jezgra i površine pređe imaju na propustljivost vodene pare glatkih pletenina. Pokazalo se da maljavost pređe predstavlja parametar koji ima veliki potencijal u pogledu prenosa vodene pare kroz tekstilne materijale.",
publisher = "Univerzitet u Nišu - Tehnološki fakultet, Leskovac",
journal = "Savremene tehnologije",
title = "Influence of yarn structure on water vapor permeability of plain knitted fabrics, Uticaj strukture pređe na propustljivost vodene pare glatkih pletenina",
pages = "20-15",
number = "2",
volume = "2",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2321"
}

Novaković, M., Bizjak, M.,& Stanković, S.. (2013). Influence of yarn structure on water vapor permeability of plain knitted fabrics. in Savremene tehnologije
Univerzitet u Nišu - Tehnološki fakultet, Leskovac., 2(2), 15-20.
https://hdl.handle.net/21.15107/rcub_technorep_2321

Novaković M, Bizjak M, Stanković S. Influence of yarn structure on water vapor permeability of plain knitted fabrics. in Savremene tehnologije. 2013;2(2):15-20.
https://hdl.handle.net/21.15107/rcub_technorep_2321 .

Novaković, Milada, Bizjak, Matejka, Stanković, Snežana, "Influence of yarn structure on water vapor permeability of plain knitted fabrics" in Savremene tehnologije, 2, no. 2 (2013):15-20,
https://hdl.handle.net/21.15107/rcub_technorep_2321 .