Претраживање
Приказ резултата 31-40 од 271
Structural and microhardness characterization of thin electrodeposited Ni/Cu multilayers on copper substrates
(27th International Conference on Microelectronics, MIEL 2010 - Proceedings, 2010)
Multilayered composite systems of alternately electrodeposited nanocrystalline Cu and Ni films on cold-rolled microcrystalline copper substrates were fabricated. Highly-densified parallel interfaces which can give rise to ...
Improved electrolyte for zinc-polyaniline batteries
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2010)
Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M ...
The study of the iron phosphate coatings porosity in bufered borate solution
(Serbian Chemical Society, Belgrade, 2010)
The iron phosphate layers on the low carbon steel surface slows steel corrosion in aggressive environments. The quality of the iron phosphate layer depends on the fraction of the total surface area covered by phosphate ...
The electrochemical synthesis of different Ag/PVP nanocomposites
(Serbian Chemical Society, Belgrade, 2010)
The potential use of Ag/poly(N-vinyl-2-pyrrolidone) (PVP) nanocomposites is in wound dressings or soft tissue implants, where Ag nanoparticles (AgNPs) serve as the antimicrobial agent. Ag/PVP nanocomposites were electrochemically ...
Fractographic analysis of biomedical Ti-based alloys with acicular microstructures
(Ruđer Bošković Institute and Croatian Microscopy Society, 2017)
Novel membrane adsorbers incorporating cross-linked poly(glycidyl methacrylate-co-2-acrylamido-2-methylpropane sulfonic acid)
(Belgrade: Institute of Technical Sciences of SASA, 2013)
Membrane adsorption has started to replace fixed bed chromatography for separation and purification of small quantities of valuable species in biotechnology and related areas. Membrane functionalization is usually required ...
The effect of Ni content on passivation of copper anodes with non-standard chemical composition
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2012)
In this paper are presented the results of the first appearance of full pasivation during the treatment of the waste sulphuric-acid solution generated in the conventional copper electrorefining process. The copper anodes ...
Novel negatively-charged ultrafiltration membranes made by a combination of immersion precipitation and photopolymerization
(Belgrade : Serbian Chemical Society, 2013)
Ultrafiltration (UF) membranes are currently used in industry for the concentration of proteins and other macromolecules. Performance of UF membranes is generally limited by a trade-off between permeability and selectivity ...
The influence of current density on charge/discharge characteristics of polyaniline electrode
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2012)
Polyaniline (PANI) was electrochemically synthesized on graphite electrode galvanostaticaly from aqueous solution of 0.25 mol dm-3 aniline and 0.5 mol dm-3 p-toluenesulfonic acid. Charge capacity available for the exchange ...
Technological analysis for machining of the reformers for fuel cells testing
(Innovation Center of Faculty of Mechanical Engineering, 2017)
Reformer is an integral component of the polymeric electrolyte membrane (PEM) fuel cell and it is used for
experimental combustion testing. By analyzing the geometry of the experimental reformer, it consists of three
plates, ...