Претраживање
Приказ резултата 3321-3330 од 3362
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Morphology, biocompatibility and antimicrobial activity of hydroxyapatite simultaneously doped with silver and strontium ions
(Belgrade : Serbian Academy of Sciences and Arts, 2018)
Synthesis and characterization of bioactive glass doped with lithium and strontium ions
(Belgrade : Institute of Technical Sciences of SASA, 2018)
Bioactive glasses have been used for over three decades in biomedical applications owing to high bioactivity, biocompatibility, as well as the possibility to stimulate regeneration of the bone. The aim of this work was to ...
Dielectric loss factor of jute woven fabrics: effect of alkali treatment conditions
(Belgrade : Materials Research Society of Serbia, 2019)
In this investigation, the influence of alkali treatment conditions on the dielectric loss factor of jute
woven fabric was studied. In that purpose, jute fabric has been alkali treated with NaOH solution
(1%, 5% and 17.5% ...
Hemp (Cannabis sativa) fibers as biosorbents and precursor for carbon sorbent production / Vlakna konoplje (Cannabis sativa) kao biosorbenti i sirovine za proizvodnju ugljeničnih sorbenata
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2015)
Short and entangled hemp fibers, obtained as a waste from textile industry, were used as efficient biosorbent and low-cost precursor for carbon sorbent production. In order to obtain the biosorbents with better sorption ...
Supercritical carbon dioxide hops extracts with antimicrobial properties
(De Gruyter Open Ltd, Warsaw, 2015)
Extracts obtained from hops (Humulus lupulus L., Cannabaceae) by supercritical fluid extraction (SFE), SFE followed by isomerization, as well as by conventional technique, were investigated for their chemical composition ...
Failure prediction of gas and oil drilling rig pipelines with axial defects
(Elsevier Science Bv, Amsterdam, 2014)
Working conditions of casing pipes in drilling rigs can significantly influence the initiation and development of damage in the material, and therefore also the safe service of the entire system. In this work, an integrity ...
Diffusional processes in the biomass conversion
(Slovnaft VÚRUP, 2012)
Diffusional process with biochemical reaction was investigated. Fermentation for ethanol production with Saccharomces Cerevisia was carried out with Ca-alginate gel in the form of layer spherical beads in the anaerobic ...
Adsorption of arsenate on iron(III) oxide coated ethylenediamine functionalized multiwall carbon nanotubes
(Elsevier Science Sa, Lausanne, 2012)
New criteria in assessing the quality of drinking water reduced the maximum permissible concentration of arsenic from 50 mu g L-1 to 10 mu g L-1 and set a requirement for the development of new technologies for arsenic ...
Resveratrol loaded liposomes produced by different techniques
(Elsevier Sci Ltd, Oxford, 2013)
Several different methods for production of liposomes incorporating resveratrol were investigated and compared from the aspect of size distribution, surface charge, entrapment efficiency, phase behavior and stability. Thin ...