Претраживање
Приказ резултата 21-30 од 95
Crystallization and sinterability of lanthanum-strontium-borate-glass powders / Kristalizacione karakteristike i sinterabilnost prahova lantan-stroncijum-boratnih stakala
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
The subject of this doctoral thesis is the study of the crystallization behavior and the sinterability of the borate glasses system La2O3-B2O3-SrO. In literature there are limited data from the crystallization characteristics ...
Micromechanical properties and thermal stability of adhesives for optical fibers based on ethylene-vinyl acetate copolymer / Mikromehanička svojstva i termička stabilnost adheziva za optička vlakna na bazi kopolimera etilena i vinil-acetata
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
Optical fibers are used for transfer of information when the reliable system was required, and in some situations it is necessary to transport optical fibers on the drums and to enable controlled and fast unwinding from ...
Application of supercritical carbon dioxide in fabrication of materials with repellent properties based on pyrethrins / Primena natkritičnog ugljenik(IV)-oksida za dobijanje materijala sa repelentnim svojstvima na bazi piretrina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
This PhD thesis was aimed to investigate the possibility of supercritical solvent impregnation (SSI) of selected polymer materials (cotton fabric, polypropylene (PP) non-woven fabric, polyamide (PA) polymers (fabric, ...
Preparation of nanocomposites based on thermoplastic polymers and influence of titanium and iron oxides nanoparticles on their properties / Dobijanje nanokompozita na bazi termoplastičnih polimera i uticaj nanočestica oksida titana i gvožđa na njihova svojstva
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
The synthesis of polymer nanocomposites by in situ polymerization of monomers in the presence of filler particles is presented in this dissertation. Nanoparticles of TiO2 and α-Fe2O3 were used as fillers. Polymer nanocomposites ...
Production of biologically active peptides derived from egg white proteins by enzymatic process, isoloation and characterization / Proizvodnja biološki aktivnih peptida proteina belanceta enzimskim postupkom, izolovanje i karakterizacija
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
The scope of this doctoral research is the development of new enzymatic processes...
Modeling and Energy Optimization of the Catalytic Naphtha Reforming Process / Modelovanje i energetska optimizacija progresa katalitičkog reforminga benzina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
Catalytic naphtha reforming is one of the primary processes of naphtha refining. This process is used for the production of the primary component of high-octane motor fuels and also for the production of feedstock for ...
The synthesis of fatty acid methyl esters from waste lard by homegeneously and heterogeneously catalyzed methanolysis / Sinteza metil estara masnih kiselina otpadne svinjske masti primenom homogeno i heterogeno katalizovane metanolize
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
In this doctoral dissertation the methanolysis of waste lard from piglet roasting in the presence of KOH, CaO or quicklime at moderate temperatures (below the boiling point of methanol) and the molar ratio of methanol:fatty ...
Structure and properties of Al-Mg alloy sheets produced by accumulative roll bonding. / Struktura i svojstva višeslojnih Al-Mg traka dobijenih hladnim valjanjem
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Influence of accumulative roll bonding (ARB) and conventional cold rolling (CR) on the mechanical and corrosion properties of an AA5083 type alloy with 4.2 wt% Mg and a modified alloy with 5.1 wt% Mg and addition of 0.5 ...
Zero waste technology of juniper berry (Juniperus communis L.) processing / Bezotpadna tehnologija prerade ploda kleke (Juniperus communis L.)
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
Essential oils are aromatic, volatile, complex mixtures of various compounds, mainly hydrocarbons (monoterpene and sesquiterpene) and oxygenated hydrocarbons. Juniper berry essential oil has wide application and high ...
The study of the reactivity of carboxylic acids by the method of linear solvation energy correlations / Proučavanje reaktivnosti karboksilnih kiselina metodom linearne korelacije solvatacionih energija
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
As a part of the research of solvent influence on the reactivity of organic compounds the reaction of carboxylic acids with diazodiphenylmethane(DDM) was chosen as a model. Rate constants for acids of various structure: ...