Претраживање
Приказ резултата 971-980 од 992
Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning
(MDPI, 2023)
Titanium alloys have been present for decades as the main components for the production of various orthopedic and dental elements. However, modern times require titanium alloys with a low Young’s modulus, and without the ...
Characterisation of biomedical titanium layers deposited by a vacuum plasma spray process
(Materiali in Tehnologije, 2021)
In this paper we will describe the process of the deposition of thick layers of VPS-Ti coating, which is used as a bonding layer for the upper porous Ti coatings on implant substrates. In order to deposit the powder, we ...
Characterization of vacuum plasma spray VPS - W coating deposited on stainless steel substrates / Karakterizacija vakuum plazma sprej VPS - W prevlake deponovane na čeličnim podloga
(Inženjersko društvo za koroziju, 2021)
In this paper, studied was the melting of W powder particles in plasma, their behavior at oxidation as well as the mechanism of hardening on the surface of the substrate. Tungsten coating layers were deposited with vacuum ...
NUMERICAL SIMULATION OF FRICTION STIR WELDING - THE PLUNGE STAGE IN T-JOINT / NUMERIČKA SIMULACIJA ZAVARIVANJA TRENJEM SA MEŠANJEM - FAZA URANJANJA ALATA U T-SPOJ
(Society for Structural Integrity and Life (DIVK), 2024)
This paper deals with the tool plunge stage of friction stir
welding which precedes the formation of the T-joint. A threedimensional numerical model, developed in software package
Simulia Abaqus® is applied for numerical ...
Characterization of NiAl layers deposited by atmospheric plasma spray (APS) / Karakterizacija NiAl slojeva deponovanih atmosferskim plazma sprejom (APS)
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
In this paper analyzed were the mechanical properties and microstructure of the Ni30Al coating layers deposited using atmospheric plasma spray (APS). For deposition of the coating applied was a composite Ni30wt.% Al powder, ...
FEM simulation of welded joint geometry influence on fatigue crack growth resistance
(1st Virtual European Conference on Fracture - Vecf1, 2020)
Fatigue behaviour of welded joints is investigated, in terms of welded joint geometry and the fatigue crack position. It is based on previous work which involved numerical simulation of fatigue crack growth in a welded ...
Crack propagation in 3PB specimen made from welded joint
(1st Virtual European Conference on Fracture - Vecf1, 2020)
Crack propagation in 3PB specimen has been investigated experimentally by using Digital Image Correlation (DIC) technique. For this purpose, specimens were taken from butt welded plates, made of P460NL1 micro-alloyed steel. ...
GEOSPATIAL MAPPING OF ECOLOGICAL RISK FROM POTENTIALLY TOXIC ELEMENTS IN SOIL IN THE PANNONIAN-CARPATHIAN BORDER AREA SOUTH OF THE DANUBE
(Carpathian Association of Environment and Earth Sciences, 2022)
This study collected agricultural surface soil samples from 200 sites in the district of Braničevo, located in the Carpathian Mountains – Pannonian Basin south of the Danube River (Serbia). The main objective was to determine ...
Mechanical features of copper coatings electrodeposited by the pulsating current (PC) regime on Si(111) substrate
(International Journal of Electrochemical Science, 2020)
Mechanical features of the Cu coatings produced by the pulsating current (PC) regime on Si(111) substrate have been investigated. The Cu coatings were electrodeposited by varying duty cycle (15-50 %) and keeping the current ...
Influence of Raster Angle on Tensile Properties of FDM Additively Manufactured Plates made from Carbon Reinforced PET-G Material
(Belgrade : Association for ETRAN Society, 2023)
Tensile properties of thin plate specimens made from short carbon fiberreinforced PET-G material are experimentally evaluated for various raster angles(printing directions). In additive manufacturing (AM), raster angle is ...