Претраживање
Приказ резултата 31-40 од 113
C* integral evaluation by using EPRI procedure / Određivanje C* integrala primenom EPRI procedure
(Society for Structural Integrity and Life, Institute for Material Testing, 2002)
The EPRI procedure for evaluation of elastic-plastic fracture mechanics parameters has been described. Using an analogy of visco-plastic problem with a described procedure, the possibility of application of EPRI procedure ...
Inverse gas chromatrography of chromia. Part II. Finite surface coverage / Inverzna gasna hromatografija na hrom(III)-oksidu. Deo II
(Serbian Chemical Society, Belgrade, 2002)
The interactions of n-hexane, benzene, chloroform, and tetrahydrofuran with dried (amorphous) chromia (I) and chromia heated at 1073 K (crystalline) (II), both obtained from a colloidal dispersion, and a commercially ...
Predictive modeling of the mechanical properties of particulate hydroxyapatite reinforced polymer composites
(Wiley, Hoboken, 2002)
The influence of particle geometry and volume fraction on the mechanical properties of a hydroxyapatite (HAp) particulate reinforced polymer (poly-L-lactide and collagen) matrix composite was investigated through finite-element ...
Thermomechanical processing of micro alloyed steels in Sartid A.D.: Part III - comparison of of Tnr temperatures determined on laboratory and industrial scale / Termomehanička prerada mikrolegiranih čelika koncerna Sartid: III deo - poređenje Tnr temperatura određenih u laboratorijskim i industrijskim uslovima
(Savez inženjera metalurgije Srbije, Beograd, 2002)
The aim of this work was to compare the Tnr temperatures of microalloyed steels estimated on laboratory (Tnr**l) and industrial scale (Tnr**l). Laboratory and industrial scale are related to testing on high temperature ...
Influence of heat transfer conditions on determination of thermal shock resistance of refractories / Uticaj prenosa toplote na određivanje termostabilnosti vatrostalnog materijala
(Savez inženjera metalurgije Srbije, Beograd, 2002)
The goal of this thesis was to determine the thermal shock resistance of alumina based refractories in the case of a heat transfer conditions different from the standard conditions given by quenching test JUS. B. D.8 319. ...
Thermal shock behavior of alumina based refractories
(Techna Srl, Faenza, 2002)
Temperature difference and fracture resistance parameters have been used to predict the thermal shock behavior. Alumina based commercial refractories with different content of Al2O3 from 28% to 78% were used. Thermal and ...
The alternative methods of preparing wool for printing / Alternativni postupci pripreme vune za štampanje
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2002)
The adsorbable organohalogens (AOX) loading of effluent must be set against the high efficiency of chlorination in preparing wool for printing Therefore, there have been a number of research attempts to develop alternative ...
Electrophoretic deposition of thin alumina films from water suspension
(Elsevier, Amsterdam, 2002)
Alumina water suspensions have been prepared for thin alumina film deposition on steel. The type and quantity of deflocculant have been determined using zeta potential and viscosimetric measurements. The deposition was ...
Polymers contamination by heavy metal compounds / Kontaminacija polimera teškim metalima
(Association of Chemical Engineers of Serbia, 2002)
The contamination of important synthetic (surface unmodified) polymers by various heavy metal compounds (such as copper, manganese and lead) in aqueous medium was investigated in this study. The influence of the pH of the ...
Alumina/silica aerogel with zinc chloride alkylation catalyst: Influence of supercritical drying conditions and aerogel structure on alkylation catalytic activity
(Elsevier, Amsterdam, 2002)
Alumina/silica aerogel with zinc chloride alkylation catalyst, was obtained using one step sol-gel synthesis and subsequent drying with the supercritical carbon dioxide. The high density supercritical carbon dioxide drying ...