Претраживање
Приказ резултата 21-30 од 93
Prediction for debonding damage process and effective elastic properties of glass-bead-filled modified polyphenylene oxide
(Elsevier Sci Ltd, Oxford, 2006)
A three-dimensional three-phase finite element unit cell model has been applied to predict the debonding damage process of particulate polymer composites (PPC) during tensile deformation. The model consists of a particle, ...
A new threshold voltage analytical model of strained Si/SiGe MOSFET
(IEEE, Electron Devices Soc & Reliability Group, New York, 2006)
In this paper a new analytical threshold voltage model of a strained Si/SiGe MOSFET is presented. Developed model includes all relevant parameters and it is very precise. Besides the previously mentioned fact and the fact ...
Photoreactive hyperbranched urethane acrylates modified with a branched saturated fatty acid
(Elsevier, Amsterdam, 2006)
Urethane acrylate resins based on partially modified aliphatic hyperbranched polyesters (HBP) were synthesized. HBP of the second and the third pseudo-generation were synthesized from 2,2-bis(hydroxymethyl)propionic acid ...
Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution
(Elsevier Science Sa, Lausanne, 2006)
The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% ...
Izrada termoplastičnih kompozitnih cevi metodom namotavanja. III. Proračun termičkih napona / Fabrication of thermoplastic composite pipes using tape winding process. III. Thermal Stresses Calculation
(Društvo inženjera plastičara i gumara, 2006)
Cilj rada je da se na osnovu matematičkog modela procesa namotavanja kompozitnih cevi izvrši numerička simulacija procesa, kako bi se sagledao uticaj procesnih parametara na zaostale napone u kompozitnoj cevi, odnosno na ...
Comparative studies of chloride and chloride/citrate based electrolytes for zinc-polyaniline batteries
(Pergamon-Elsevier Science Ltd, Oxford, 2006)
Electrochemical behavior of zinc and thin polyaniline (PANI) polymerized from 0.1 M HCl to 0.1 M aniline on graphite electrode, in 0.2 M ZnCl(2) and 0.50 M NH(4)Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate ...
Influence of electrode material on gas-filled surge arresters characteristics in gamma and X radiation field
(Natl Inst Optoelectronics, Bucharest-Magurele, 2006)
The aim of this paper is to find the possibility for improvement of gas-filled surge arresters (GFSA) characteristics in y and X radiation field by appropriate choice of electrode materials. For that purpose electrodes ...
Electrophoretic deposition and characterization of boehmite coatings on titanium substrate
(Elsevier Science Bv, Amsterdam, 2006)
Boehmite aqueous sol was prepared by the peptization of Al(OH)(3). The solid phase, obtained by drying the prepared aqueous sol, was characterized by infrared spectroscopy and X-ray diffraction (pseudoboehmite was confirmed), ...
Nanoindentation of in situ polymers in hydroxyapatite/poly-L-lactide biocomposites
(Trans Tech Publications Ltd, Durnten-Zurich, 2006)
In order to obtain more accurate properties after compaction of hydroxyapatite (HAp)/poly-L-lactide (PLLA) composite, high-resolution measurement of mechanical properties method is proposed to determine the properties of ...
Simplex optimization of artificial neural networks for the prediction of minimum detectable activity in gamma-ray spectrometry
(Elsevier, Amsterdam, 2006)
A three-layer feed-forward artificial neural network (ANN) with a back-propagation learning algorithm was used to predict the minimum detectable activity (AD) of radionuclides (Ra-226, U-238, U-235, K-40, Th-232, Cs-134, ...