Претраживање
Приказ резултата 11-20 од 176
Heat transfer coefficient and pressure drop during refrigerant R-134a condensation in a plate heat exchanger
(Versita, Warsaw, 2008)
The condensation heat transfer coefficient and the two-phase pressure drop of refrigerant R-134a in a vertical plate heat exchanger were investigated experimentally. The area of the plate was divided into several segments ...
Antibacterial effect of silver nanoparticles deposited on corona-treated polyester and polyamide fabrics
(Wiley, Hoboken, 2008)
The possibility of using a corona treatment (electrical discharge at atmospheric pressure) for fiber surface activation, which can facilitate the loading of silver nanoparticles (NPs) from colloids onto the polyester (PES) ...
Assessment of viscoelastic crack bridging toughening in refractory materials
(Elsevier Sci Ltd, Oxford, 2008)
Viscoelastic bridges can be formed in refractory ceramics while cooling from high temperatures. Such bridges can shield crack tips, thus reducing the effective crack tip stress intensity factors leading to higher resistance ...
Analysis of amphetamines illegally produced in Serbia / Analiza amfetamina ilegalno proizvedenog u Srbiji
(Serbian Chemical Society, Belgrade, 2008)
Forensic practice in the Republic of Serbia faced the illegal production of amphetamine for the first time in 2003. This paper presents the results of the chemical characterization of 32 batches of amphetamine samples from ...
The optimization of zinc dialkyldithiocarbamates synthesis and determination of their antioxidant activity
(Association of the Chemical Engineers of Serbia, 2008)
A two-step optimized laboratory synthetic method of zinc dialkyldithiocarbamates is presented. In the course of the first phase, a sodium salt of dialkyldithiocarbamic acid has been synthesized from the dialkylamines, ...
In situ lead stabilization using natural and synthetic apatite
(Savez hemijskih inženjera, Beograd, 2008)
In this work, mineral apatite was investigated for the remediation of lead contamination. Two different apatite minerals were used: synthetic apatite, Ca10(PO4)6(OH)2 (hereafter denoted as HAP) and natural apatite from ...
Influence of chain length and degree of branching of alcohol plus chlorobenzene mixtures on determination and modelling of V-E by CEOS and CEOS/G(E) mixing rules
(Elsevier Science Bv, Amsterdam, 2008)
The densities of binary mixtures of (1-propanol, or 1-butanol, or 2-butanol, or 1-pentanol+chlorobenzene) have been measured at temperatures 288.15, 293.15, 298.15, 303.15, 308.15 and 313.15 K and atmospheric pressure while ...
Comparison of different technologies for alginate beads production
(Springer International Publishing Ag, Cham, 2008)
This paper describes the results of the round robin experiment "Bead production technologies" carried out during the COST 840 action "Bioencapsulation Innovation and Technologies" within the 5th Framework Program of the ...
Nanocomposite powders for new contact materials based on copper and alumina
(Association of the Chemical Engineers of Serbia, 2008)
This paper is a contribution to characterization of Cu-Al2O3 powders with nanostructure designed for the production of dispersion strengthened contact materials. New materials with predetermined properties can be successfully ...
100 years of Bor smelter factory, RTB Bor, Serbia / Sto godina Topionice bakra u Rudarsko-Topioničarskom Basenu Bor, Srbija
(Savez inženjera i tehničara Srbije, Beograd, 2008)
The break through moment in evolution of human community is discover of some metals. Developing mining and metallurgy in eastern Serbia was depended of developing The Bor mining and metallurgical complex (RTB Bor). The ...