Претраживање
Приказ резултата 31-40 од 176
Corrosion stability of epoxy coatings on aluminum pretreated by vinyltriethoxysilane
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
The electrochemical and transport properties and adhesion of epoxy coatings electrodeposited on aluminum pretreated by vinyltriethoxysilane (VTES) were investigated during exposure to 3% NaCl. The VTES films were deposited ...
Surface characteristics and antibacterial activity of a silver-doped carbon monolith
(Natl Inst Materials Science, Ibaraki, 2008)
A carbon monolith with a silver coating was prepared and its antimicrobial behaviour in a flow system was examined. The functional groups on the surface of the carbon monolith were determined by temperature-programmed ...
Densities and excess molar volumes of the ternary mixture 2-butanol plus chloroform plus benzene and binary mixtures 2-butanol plus chloroform, or plus benzene over the temperature range (288.15 to 313.15) K
(Amer Chemical Soc, Washington, 2008)
Densities rho and excess molar volumes V(E) of the 2-butanol + chloroform + benzene ternary mixtures and two binaries, 2-butanol + chloroform and 2-butanol + benzene, have been determined. Experimental rho measurements ...
Study of the simulated heat affected zone of creep resistant 9-12% advanced chromium steel
(Taylor & Francis Inc, Philadelphia, 2008)
Global warming leads to research-development attempts worldwide with a view to reduce CO2 emission. Therefore, in the energy supply sector, a special focus has been directed to further development of steels that can endure ...
The immobilization of lipase on Sepabeads: Coupling, characterization and application in geranyl butyrate synthesis in a low aqueous system
(Association of the Chemical Engineers of Serbia, 2008)
Lipase from Candida rugosa immobilized on Sepabeads EC-EP was shown to catalyze the esterification of geraniol with butyric acid in a predominantly organic system. The immobilization procedure was adjusted to optimize the ...
Mechanics of submerged jet cavitating action: material properties, exposure time and temperature effects on erosion
(Springer, New York, 2008)
Experimental setup with a submerged cavitating jet has been used for the study of influences of material, exposure time and working fluid temperature on the erosion process. Each of the parameters has been varied separately, ...
Temperature dependence of the kinetics of oxygen reduction on carbon-supported pt nanoparticles / Temperaturna zavisnost elektrohemijske redukcije kiseonika na nanočesticama platine na ugljeničnom nosaču
(Serbian Chemical Society, Belgrade, 2008)
The temperature dependence of oxygen reduction reaction (ORR) was studied on highly dispersed Pt nanoparticles supported on a carbon cryo-gel. The specific surface area of the support was 517 m2 g-1, the Pt particles ...
Characterization of microstructural changes in an Al-6.8 wt.% Mg alloy by electrical resistivity measurements
(Elsevier Science Sa, Lausanne, 2008)
Microstructural changes in an AlMg6.8 alloy after different thermo mechanical (TMT) and sensitization treatments were investigated by electrical resistivity measurements. The electrical resistivity was most affected by the ...
Extraction of hyperforin and adhyperforin from St. John's Wort (Hypericum perforatum L.) by supercritical carbon dioxide
(Elsevier, Amsterdam, 2008)
St. John's Wort (Hypericum perforatum L.) was extracted with supercritical carbon dioxide (SC CO2) under 10, 15 and 20 MPa and at 313 and 323 K. The influence Of SC CO2 density (400-800 kg/m(3)) was examined with respect ...
Polyaniline as possible anode materials for the lead acid batteries
(Elsevier Science Bv, Amsterdam, 2008)
Electrochemically formed thin film polyaniline (PANI) anode and lead dioxide (PbO2) cathode, obtained from sulfuric acid solution, for potential applications as electrode materials in PANI vertical bar H2SO4 vertical bar ...