Pretraživanje
Prikaz rezultata 11-20 od 216
Influence of cubic alpha-Fe2O3 particles on the thermal stability of poly(methyl methacrylate) synthesized by in situ bulk polymerization
(Elsevier Sci Ltd, Oxford, 2009)
Poly(methyl methacrylate)/alpha-Fe2O3 Composites were prepared by in situ bulk radical polymerization of methyl methacrylate in the presence of the cubic alpha-Fe2O3 particles using 2,2'-azobisisobutyronitrile as initiator. ...
Preparation and Thermal Stability of Elastomers Based on Irregular Poly(urethane-isocyanurate) Networks
(Taylor & Francis Inc, Philadelphia, 2009)
The objective of this study was to investigate the thermal stability of poly(urethane-isocyanurate) networks with increasing amount of dangling chains. In order to improve thermal stability of elastomeric materials, networks ...
Wood-Thermoplastic Composites Based on Industrial Waste and Virgin High-Density Polyethylene (HDPE)
(Taylor & Francis Inc, Philadelphia, 2009)
This article investigated the water resistance, mechanical and thermal properties, and the microstructure of wood-plastic composites, which were made by hot pressing using either virgin or high-density polyethylene (HDPE) ...
Electrodeposited hydroxyapatite thin films modified by ion beam irradiation
(Natl Inst Optoelectronics, Bucharest-Magurele, 2009)
Surface modification of hydroxyapatite (HA) thin films electrodeposited on titanium was conducted by ion implantation, using nitrogen and argon ions at different constant fluences of 1x10(15), 1x10(16) and 1x10(17) ions/cm(2). ...
Matrix Microstructure and Its Micro-Analysis of Constituent Phases in As-Cast Fe-Cr-C-V Alloys
(Japan Inst Metals, Sendai, 2009)
The as-cast matrix microstructure in 19 mass%Cr-2.8 mass%C white cast iron with up to 4.7 mass% V additions has been studied. Type and degree of the austenite transformation in the course of cooling after solidification ...
Catalytic Degradation Processes and Swelling of Alginate Bio-Medical Gels under Influence of Oxygen
(Taylor & Francis Inc, Philadelphia, 2009)
Interaction of cells with polymer networks in nanostructured devices as alginate beads for cell immobilization are considered. Influence of process parameters as oxygen concentration inside a bead on changes of alginate ...
Structure and thermal behavior of the layered zincophosphate [NH3-CH2-CH(NH3)-CH3](ZnPO4)(2)
(Elsevier Science Sa, Lausanne, 2009)
A zinc phosphate with the composition [NH3-CH2-CH(NH3)-CH3](ZnPO4)(2), containing the doubly protonated 1,2-diaminopropane (abbr. HDAP), was synthesized by hydrothermal crystallization of zinc nitrate, phosphoric acid, ...
One-bath One-dye Class Dyeing of PES/Cotton Blends after Corona and Chitosan Treatment
(Korean Fiber Soc, Seoul, 2009)
In this work, the effects of corona discharge (CD) and chitosan treatment on the dyeability of polyester/cotton blends with direct and reactive dyes were studied. The surface chemical changes of polyester and cotton were ...
Plasma-induced Decolorization of Indigo-dyed Denim Fabrics Related to Mechanical Properties and Fiber Surface Morphology
(Sage Publications Ltd, London, 2009)
The aim of this study was to investigate how morphology of fibers is affected by plasma during the process of decolorization by a low-pressure RF plasma (gas, treatment time, and power were varied) and atmospheric pressure ...
The influence of silver content on antimicrobial activity and color of cotton fabrics functionalized with Ag nanoparticles
(Elsevier Sci Ltd, Oxford, 2009)
The aim of this study was to examine the antimicrobial efficiency and color changes of cotton fabrics loaded with colloidal silver nanoparticles which were synthesized without using any stabilizer. The influence of colloidal ...