Pretraživanje
Prikaz rezultata 21-30 od 65
Optimization of the procedure for the synthesis of calcium lactate pentahydrate in laboratory and semi-industrial conditions / Optimizacija postupka sinteze kalcijum-laktat pentahidrata u laboratorijskim i poluindustrijskim uslovima
(Association of Chemical Engineers of Serbia, 2009)
This paper is concerned on the development of the optimal laboratory procedure for the synthesis of calcium lactate pentahydrate and the application of obtained results in a project for a semi-industrial installation for ...
Damage detection of hybrid aramid/metal-PVB composite materials using optical fiber sensors
(Association of the Chemical Engineers of Serbia, 2009)
Embedding optical fiber sensors within laminar thermoplastic composite material results in forming a system known as 'smart structure'. These sensors present the information about the inner structure health during the ...
Smart hydrogels based on itaconic acid for biomedical application / Inteligentni hidrogelovi na bazi itakonske kiseline za biomedicinsku primenu
(Association of Chemical Engineers of Serbia, 2009)
pH and temperature sensitive hydrogels, based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) copolymers, were prepared by gamma irradiation and characterized in order to examine their potential use in biomedical ...
Linear free energy relationships of the H-1 and C-13 NMR chemical shifts in 3-cyano-4-(substituted phenyl)-6-phenyl-2(1H)pyridones
(Elsevier Science Bv, Amsterdam, 2009)
Linear free energy relationships (LFER) were applied to the H-1 and C-13 NMR chemical shifts in 3-cyano-4(substituted phenyl)-6-phenyl-2(1H)pyridones. The correlation analysis for the substituent-induced chemical shifts ...
Mass transfer and fluid flow visualization in packed and fluidized beds by the adsorption method
(Maik Nauka/Interperiodica/Springer, New York, 2009)
Mass transfer coefficient (j (D) ) between fluid and column wall in liquid packed and fluidized beds of spherical inert particle has been studied experimentally using adsorption method. Experiments were conducted in column ...
Acceptability of Residual Stresses Measurement Methods of Butt Weldments and Repairs
(Strojarstvo, 2009)
The joints made by fusion of materials are exposed to the influence of residual stresses induced by welding thermal cycles. Residual stresses were measured on butt welded plates made of NIOMOL 490K, before and after ...
Heavy metals concentration in soils from parks and green areas in Belgrade / Koncentracija teških metala u zemljištu parkova i zelenih površina u Beogradu
(Serbian Chemical Society, Belgrade, 2009)
The current study included the investigation of several metals and their distribution in urban soils from parks and green areas in the city of Belgrade. The soils were sampled in January and February 2008. The concentrations ...
The effect of the concentration of the reacting ion on the control of the electrodeposition process / Uticaj koncentracije reagujućeg jona na kontrolu procesa elektrohemijskog taloženja
(Serbian Chemical Society, Belgrade, 2009)
The effect of the concentration of the reacting ion on the nature of the control of the electrodeposition process was investigated by digital simulation of the polarization curve using the Newman form of the polarization ...
Micromechanical and structural properties of nickel coatings electrodeposited on two different substrates / Mikromehanička i strukturna svojstva elektrodeponovanih prevlaka nikla na različitim supstratima
(Serbian Chemical Society, Belgrade, 2009)
Fine-structured nickel coatings were electrodeposited from a sulfamate-based electrolyte onto different substrates: polycrystalline cold-rolled copper and single crystal silicon with (111) orientation. The influence of the ...
Influence of increased temperature on clay fast drying process
(Revista Romana de Materiale/ Romanian Journal of Materials, 2009)
In this paper are presented testing results during process of fast drying at conditions of increased temperature. Three different masonry raw materials were examined using recircular laboratory dryer with air recirculation. ...