Претраживање
Приказ резултата 31-40 од 213
Environmental Safety Aspects of Solid Residues Resulting from Acid Mine Drainage Neutralization with Fresh and Aged Red Mud
(Water Air and Soil Pollution, 2021)
Acid mine drainage (AMD) remediation by red mud (RM) can benefit process sustainability and waste valorization. Though the AMD properties upon using RM have been broadly investigated, the key features and the environmental ...
Determination of temperature stresses in CWR based on measured rail surface temperatures
(Construction and Building Materials, 2021)
The main aim of conducted research is determination of temperature stresses due to the uneven temperature distribution in CWR. This paper presents a methodology for determination of temperature stresses in CWR based on (1) ...
Extraction of phenolic compounds from agro-industrial wastes and evaluation of their antioxidative potential
(Skopje, Macedonia : Consulting and Training Center - KEY, 2021)
Constant world population growth imposes the need for the production of more food, and as a consequence, has an increase in the organic-rich wastes. These agro-industrial wastes represent problem from the environmental ...
Development of advanced floating poly(lactic acid)-based materials for colored wastewater treatment
(Journal of Supercritical Fluids, 2021)
The release of industrial wastewater into the ecosystem prompted our research on the development of an efficient and biodegradable material that can be used for wastewater treatment. We optimized preparation of porous ...
Mechanism of mediated alkali peroxide oxidation and triplet versus singlet oxygen formation
(Nature Research, 2021)
Aprotic alkali metal-O-2 batteries face two major obstacles to their chemistry occurring efficiently, the insulating nature of the formed alkali superoxides/peroxides and parasitic reactions that are caused by the highly ...
Welded joint geometry effect on fatigue crack growth resistance in different metallic materials
(International Journal of Fatigue, 2021)
Fatigue crack growth through different welded joint regions was investigated, in terms of welded joint geometry and fatigue crack position. In the first phase of investigation, numerical simulation of crack growth in a ...
Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration
(Molecules, 2021)
Novel Zn-Co-CeO2 protective composite coatings were deposited successfully from chloride plating solutions. Two different types of ceria sources were used and compared: commercial ceria powder and home-made ceria sol. ...
Tetragonal CoMn2O4 nanocrystals on electrospun carbon fibers as high-performance battery-type supercapacitor electrode materials
(Royal Society of Chemistry, 2021)
We herein report a simple two-step procedure for fabricating tetragonal CoMn2O4 spinel nanocrystals on carbon fibers. The battery-type behavior of these composite fibers arises from the redox activity of CoMn2O4 in an ...
Adsorption of Anthraquinone Dye AB111 from Aqueous Solution using Synthesized Alumina-Iron Oxide Doped Particles
(Science of Sintering, 2021)
Adsorption of anthraquinone dye Acid Blue 111 by alumina-iron oxide doped particles prepared by sol-gel method from aqueous solutions was studied. The adsorbent morphology was revealed by FESEM and the crystallographic ...
Global market trends of tantalum and recycling methods from Waste Tantalum Capacitors: A review
(Sustainable Materials and Technologies, 2021)
The rapid digitalization of the world, technological up-gradation, and shorten life cycle of electronic gadgets leading to the generation of an enormous amount of waste tantalum capacitors (WTCs) rich in tantalum every ...