Претраживање
Приказ резултата 1-10 од 13
Protective ability and impedance response of sol-gel reversely transformed ceria conversion coating on aluminium
(Springer, New York, 2016)
Ceria coating is formed on Al from the ceria sol prepared exclusively by forced hydrolysis of Ce(NO3)(4), in order to test their ability to protect Al from corrosion. The characterization of sol-gel-processed ceria coating ...
Seawater zinc/polypyrrole-air cell possessing multifunctional charge-discharge characteristics
(Springer, New York, 2017)
An environmentally friendly cell using polypyrrole-air regenerative cathode and zinc as anode is investigated in the 3% sodium chloride solution. The cell can operate in different charge and discharge mode. Polypyrrole can ...
Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition
(Springer, New York, 2010)
Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a ...
Pt/C nanocatalysts for methanol electrooxidation prepared by water-in-oil microemulsion method
(Springer, New York, 2016)
Pt nanoparticles supported on Vulcan XC-72R were synthesized by water-in-oil microemulsion method. By incorporating different amounts of HCl as a capping agent in the precursor-containing water phase, nanoparticle shape ...
Pd black decorated by Pt sub-monolayers as an electrocatalyst for the HCOOH oxidation
(Springer, New York, 2014)
Pd black was modified by a very low amount of Pt corresponding to a sub-monolayer (ML). Spontaneous displacement method was employed. The catalysts with 0.02-0.12 ML were characterized by cyclic voltammetry and COads ...
Morphology, internal structure and growth mechanism of electrodeposited Ni and Co powders
(Springer, New York, 2006)
In this paper the morphology (SEM analysis), the internal structure (cross-section analysis) and the growth mechanism of Ni and Co powders electrodeposited from ammoniacal electrolyte are investigated. It is shown that ...
Electrochemical deposition and characterization of iridium oxide films on Ti2AlC support for oxygen evolution reaction
(Springer, New York, 2021)
Two types of iridium oxide films formed at the Ti-2 AlC substrate were investigated: (1) anodically electrodeposited iridium oxide film from the solution based on IrCl(3)xH(2)O; (2) iridium oxide film prepared by cycling ...
Titanium coated with high-performance nanocrystalline ruthenium oxide synthesized by the microwave-assisted sol-gel procedure
(Springer, New York, 2016)
Ruthenium oxide coating on titanium was prepared by the sol-gel procedure from well-defined colloidal oxide dispersions synthesized by the microwave (MW)-assisted hydrothermal route under defined temperature and pressure ...
Enhancement of the electrochemical reduction of oxygen at platinum by nickel underpotential deposition
(Springer, New York, 2006)
Polycrystalline Pt electrode was modified by underpotential deposition (upd) of nickel. The modification was performed by potential cycling in phosphate buffer pH 7. 0 containing NiSO4, in which hydrogen and nickel upd ...
Electrochemical deposition and corrosion stability of Zn-Co alloys
(Springer, New York, 2009)
Electrochemically deposited Zn-Co alloys under various deposition conditions were investigated using anodic linear sweep voltammetry for phase structure determination, scanning electron microscopy for surface morphology ...