Pretraživanje
Prikaz rezultata 11-17 od 17
Characterization of high-energy ball milled prealloyed copper powder containing 2.5 wt%Al
(Springer, Dordrecht, 2002)
Normal- and reversed-phase chromatography of para-substituted propanoic acid Amides
(Springer Heidelberg, Heidelberg, 2002)
The chromatographic behavior of newly synthesized para-substituted propanoic acid amides has been studied in normal- and reversed-phase thin-layer chromatography. The retention mechanism on different TLC supports was ...
The effect of temperature on strain-rate sensitivity in high strength Al-Mg alloy sheet
(Elsevier Science Sa, Lausanne, 2002)
Comprehensive experimental work performed to assess the temperature and strain-rate affected deformation behaviour of commercial AlMg6 type, 1.0 mm thick annealed sheet. Elevated temperature tension test performed at ...
Gas holdup in a gassed reciprocating plate column with Rashig rings placed in interplate spaces
(Canadian Society for Chemical Engineering, 2002)
The gas holdup is studies in a gassed reciprocating plate column with the addition of the Rashig rings placed in each interplate space. The gas holdup generally increases with increasing the vibration speed, the superficial ...
Hydrogen evolution reaction from EDTA solutions
(4th Conference of the Yugoslav Materials Research Society, 2002)
An attempt was made to investigate the mechanism and kinetics of hydrogen evolution reaction on zinc and platinum wire electrodes from solutions containing ethylene diamine tetraacetic acid (EDTA). EDTA is a tetra-basic ...
Aging of the over-voltage protection elements caused by over-voltages
(Microelectronics Reliability, 2002)
The aim of this work is examining the influence of the number of the activation-over-voltage pulses to the aging of over-voltage protection elements. Both non-linear (gas-filled surge arresters (GFSA), varistors, over-voltage ...
Optical fibers with composite magnetic coating
(Elsevier, 2002)
The goal of these investigations was to define the process parameters that enable the formation of a composite coating with the most uniform thickness on an optical fiber. The composite coating was obtained by drawing the ...