Претраживање
Приказ резултата 191-200 од 211
Comparison of Hydroxyapatite Sorption Properties Towards Cadmium, Lead, Zinc and Strontium Ions
(Trans Tech Publications, 2005)
Apatites are well known matrix for heavy metal immobilization and remediation of
ground water and contaminated soils. In this work, capacities of different synthetic hydroxyapatite
(HAP) samples for Pb, Cd, Sr and Zn ...
Digitally graded GaAs/Al0.44Ga0.56As quantum-cascade laser
(Elsevier, Amsterdam, 2003)
A method for the optimal design and realization of a GaAs/Al0.44Ga0.56As quantum-cascade laser (QCL) is presented. Firstly, an optimal, smooth active region profile is derived, using inverse spectral theory. A digitally ...
Support of laboratory accreditation in Central and Eastern Europe by preliminary assessment
(Springer-Verlag, 2004)
The development of a competent and reliable network of accredited laboratories represents one, among other, important means of removal of technical barriers to trade. The achievement of the goal "tested once-accepted ...
Structural analysis of abrasive composite materials with nonwoven textile matrix
(Elsevier B.V., 2004)
The goal of this research was to design the novel composite material based on nonwoven textile material (NTM) while using the existing production facilities. The chosen product was abrasive composite material with nonwoven ...
Processing of ferroelectric thin layers of barium titanate by the sol-gel method
(Physics and Chemistry of Glasses, 2005)
The influence of various processing parameters is investigated during sol formation (metal precursors: titanium (IV) butoxide, barium hydroxide, barium acetate; pH of sol solution; type and amount of stabiliser and solvent; ...
Nanosilica/PMMA composites obtained by the modification of silica nanoparticles in a supercritical carbon dioxide-ethanol mixture
(Springer, New York, 2009)
Nanosilica/poly(methyl methacrylate) (PMMA) composites are used to improve the mechanical properties of neat PMMA polymer. In order to obtain superior mechanical properties, it is essential to achieve good bonding between ...
Electrocatalytic behaviour of MoPt3 intermetallic phase for hydrogen evolution in acid solution
(Ecole Polytechnique de Montreal, 2004)
Metallurgicaly prepared MoPt3 intermetallic compound has been investigated as electrocatalyst for the cathodic evolution of hydrogen (HER) in 0.5 mol dm-3 HClO4 solution at 298 K. The HER on activated and non-activated ...
On a possible role of dicarboxylate ions in the formation of open-framework metallophosphates
(Croatian Chemical Society, 2006)
Three dicarboxylic acids (oxalic, malonic and terephthalic) were investigated as possible pillars in the formation of metallophosphates with extended structures in the presence of 1,2-diaminopropane (DAP) as a structure-directing ...
Experimental study of zinc morphology in alkaline electrolyte at low direct and pulsating overpotentials
(Elsevier Sequoia SA, 2000)
A possible mechanism of the formation of spongy zinc electrodeposits is considered. The confirmation of the proposed semiquantitative mathematical model is performed in zinc electrodeposition onto copper wire from a 0.1 M ...
Magneli phase titanium oxides as catalyst support - Electrochemical behavior of Ebonex/Pt catalysts
(Journal of New Materials for Electrochemical Systems, 2006)
The impregnation method has been applied to synthesize platinum nanoparticles on Magneli phase titanium oxide powder (Ebonex). Surface area of the Ebonex support was determined by BET technique. Distribution and morphology ...