Search
Now showing items 11-20 of 898
An Experimental Study of Mechanical Properties and Heat Transfer of Acrylic Composites with Structural and Surface Modified Al2O3 Particles
(International Institute for the Science of Sintering (IISS), 2020)
Thermal properties of acrylate-based composite combined with alumina-based particles were investigated. The composites were made of poly (methyl methacrylate) (PMMA) modified with dimethyl itaconate (DMI) as a matrix. Neat ...
Sn-doped TiO2 nanotubular thin film for photocatalytic degradation of methyl orange dye
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
We fabricated Sn-doped TiO2 nanotubular film via annealing of anodized TiO2 nanotubes grown on F-SnO2 (FTO) glass. Annealing was carried out at 500 degrees C in ambient air. Anatase crystal structure was achieved with no ...
Surface Patterning Increases Fluid Sorption Efficiency in Porous Reactive Coatings: A Model for Optimised Surface-Flow Filtration
(Transport in Porous Media, 2021)
A novel surface-flow filter has been designed to take advantage of a combination of both diffusion and lateral flow permeation, since active coatings, even if porous, tend to be far less permeable than through-flow constructs. ...
Kinetics and mechanism of degradation of Co(II)-N-benzyloxycarbonylglycinato complex
(Springer, Dordrecht, 2012)
The kinetics of multi-step thermal degradation of Co(II) complex with N-benzyloxycarbonyl glycinato ligand [Co(N-Boc-gly)(2)(H2O)(4)]center dot 2H(2)O, in non-isothermal conditions was studied using isoconversional and ...
Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2017)
In this work, Zn(CH3 COO)(2) 2 H-2 O with AgNO3 content from 0 to 6 mol% was solvothermally treated at 120 C for 18 h in the presence of poly(vinyl pyrrolidone), ethylene glycol and sodium hydroxide. The structural , ...
Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material
(Science of Sintering, 2022)
Rice husk was used to produce silica particles, which were then used to reinforce the polymer matrix. The synthesized SiO2 particles were characterized using X-ray diffraction, Fourier transforms infrared spectroscopy ...
A new approach to compatibilization study of EVA/PMMA polymer blend used as an optical fibers adhesive: Mechanical, morphological and thermal properties
(Elsevier Sci Ltd, Oxford, 2018)
Mechanical, morphological and thermal properties of optical fiber adhesives, based on poly(ethylene-co-vinyl acetate) (EVA) with 18 and 40% of vinyl acetate, polymer blend of EVA/poly(methyl methacrylate) (PMMA), and graft ...
Preparation and Characterization of Novel Glycidyl Methacrylate/Clay Nanocomposites
(Science of SinteringScience of Sintering, 2022)
The impact of the type and amounts of nanofiller on the features of the glycidyl methacrylate-co-ethylene glycol dimethacrylate (GMA-co-EGDMA)/organomodified montmorillonite (OMt) nanocomposites that were prepared by in ...
On a possible role of dicarboxylate ions in the formation of open-framework metallophosphates
(Croatian Chemical Society, 2006)
Three dicarboxylic acids (oxalic, malonic and terephthalic) were investigated as possible pillars in the formation of metallophosphates with extended structures in the presence of 1,2-diaminopropane (DAP) as a structure-directing ...
STM image visualization of Si(111) 7 x 7 surface (graphic simulation and implementation)
(Elsevier Science Bv, Amsterdam, 2007)
The possibilities of graphic STM image simulation of a clean Si(1 1 1) 7 x 7 surface at atomic level are indicated. The presented procedure takes into account various types of deformation on the surface near the Fermi level ...