Search
Now showing items 111-120 of 134
Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent
(International Institute for the Science of Sintering (IISS), 2022)
In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were ...
Analysis of inhibitory properties of Ce-citrate as a green corrosion inhibitor of low alloy steel in neutral chloride solution
(John Wiley and Sons Inc, 2022)
The new environmentally friendly corrosion inhibitor Ce-citrate was analyzed in 0.05 M NaCl solution on the AISI 4130 steel. For comparison, corrosion inhibitor Ce-chloride is tested in the same concentration as Ce-citrate ...
Integration of soil washing and cork permeable reactive barriers for the remediation of soil contaminated with polycyclic aromatic hydrocarbons
(John Wiley and Sons Ltd, 2022)
Soil washing is a well-known technology for the remediation of soils polluted by organic contaminants, including polycyclic aromatic hydrocarbons (PAHs). This study aimed to go further by integrating soil washing and ...
Cellulose-Based Waste in a Close Loop as an Adsorbent for Removing Dyes from Textile Industry Wastewater
(MDPI, 2024)
In an attempt to reuse fibrous textile waste and, at the same time, to address dye pollution
in textile wastewater, waste cotton-based yarn was utilized as a cheap and sustainable adsorbent, as
well as a row material for ...
Effects of Multiple Defects on Welded Joint Behaviour under the Uniaxial Tensile Loading: Fem and Experimental Approach
(MDPI, 2023)
The research represents the ongoing investigation of the welded joints behavior made of low-carbon low-alloyed steel in the presence of different multiple defects. Following the initial experimental and numerical analyses ...
Corrosion Behavior of Nickel–Titanium Continuous-Casted Alloys
(MDPI, 2024)
Variations in the corrosion behavior of biomedical NiTi alloys in Cl− containing and acidic environments present a problem with their biological implantation. The objective of this research was to evaluate the synergy of ...
Measurement and Correlation of Liquid–Liquid Equilibrium Data for Ternary Systems Water + C1–C3 Alcohols + Diethyl Adipate at 298.15 K and Atmospheric Pressure
(American Chemical Society, 2024)
This paper investigates the feasibility of using diethyl adipate (DEA), a green organic solvent, as a separation agent for extracting various alcohols from aqueous solutions. In order to achieve this, liquid-liquid equilibria ...
Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles
(Materials Letters, 2022)
This study presents the impact properties of the new form of hybrid thermoplastic composites. The Kolon fabrics were impregnated with the 10 wt% poly (vinyl butyral) (PVB)/ethanol solution with the addition of silica (SiO2) ...
Plasma Treatment as a Sustainable Method for Enhancing the Wettability of Jute Fabrics
(MDPI, 2023)
In this paper, raw jute fabric was subjected to atmospheric pressure dielectric barrier discharge (at 150 or 300 Hz) to enhance its wettability, i.e., capillarity and wetting time. Attenuated Total Reflectance-Fourier ...
Prebiotic effect of galacto-oligosaccharides on the skin microbiota and determination of their diffusion properties
(John Wiley and Sons Inc., 2022)
Recently, prebiotics are attracting plenty of attention in the field of skin care, since it is found that they are able to support the balance of beneficial and harmful microorganisms on the skin, and accordingly prevent ...