Претраживање
Приказ резултата 21-30 од 38
The influence of the deposition parameters on the porosity of thin alumina films on steel / Uticaj parametara elektroforetskog taloženja praha aluminijum-oksida iz vodenih suspenzija na poroznost dobijenih tankih filmova na čeliku
(Serbian Chemical Society, Belgrade, 2004)
The influence of the deposition parameters on the porosity of thin alumina films electrophoretically deposited on steel from aqueous suspensions was investigated. The effects of the applied voltage, deposition time, ...
Lipase immobilization in a hollow fibre membrane reactor: Kinetics characterization and application for palm oil hydrolysis
(Versita, Warsaw, 2004)
Feasibility of lipase immobilization in a hydrophilic hollow fibre membrane reactor for oil hydrolysis has been demonstrated. A simple immobilization technique was applied resulting in about 155 mg m(-2) of immobilized ...
The influence of the solvent on organic reactivity. Part II. Hydroxylic solvent effects on the reaction rates of diazodiphenylmethane with 2-(2-substituted cyclohex-1-enyl)acetic and 2-(2-substituted phenyl)acetic acid / Uticaj hidroksilnih rastvarača na brzinu reakcije diazodifenilmetana Sa 2-(2-supstituisanim cikloheks-1-enil)sirćetnim i 2-(2-supstituisanim fenil)sirćetnim kiselinama
(Serbian Chemical Society, Belgrade, 2004)
The rate constants for the reaction of diazodiphenylmethane with 2-(2-substituted cyclohex-1-enyl)acetic acids and 2-(2-substituted phenyl)acetic acids, previously determined in seven hydroxylic solvents, were correlated ...
Fatigue damage detection in composite rods using fiber optic intensity based sensors
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
An application of the embedded intensity based fiber optic sensors (FOS) for fatigue damage detection in cantilevered composite rods is presented. During the fatigue test with constant amplitude of oscillations, the ...
Influence of texturing conditions on characteristics and dyeing behaviour of polyamide 66 yarn
(Niscair, 2004)
The influence of texturing parameters, such as draw ratio and heater temperature, on characteristics and dyeing behaviour of polyamide 66 yam has. been studied. It is observed that the draw ratio and heater temperature ...
Electrochemically deposited Ni+WC composite coatings obtained under constant and pulsating current regimes
(Netherlands : Kluwer Academic Publishers, 2004)
A series of Ni+WC composite coatings were obtained by electrodeposition on a rotating disc electrode (RDE)from a commercially available Watts bath containing additives for brightness and smoothing and insoluble WCparticles, ...
Reflection and structural analyses of mirror-bright metal coatings
(Springer, 2004)
Reflection and structural analyses of different copper and zinc coatings were performed. The copper coatings were electrodeposited from a sulfate solution in the presence of thiourea, as well as in the presence of modified ...
The influence of oxide sol properties on the capacitive behavior of carbon supported hydrous ruthenium oxide
(Progress in Advanced Materials and Processes: Proceedings of the Fifth Jugoslav Materials Research Society, YUCOMAT V, 2004)
Carbon supported hydrous ruthenium oxide was prepared by ail ultrasonic threatment of carbon black-RuOxHy sol mixture (impregnation). Black Pearl 2000(R) was used as a supporting material, while an oxide sol was prepared ...
The effect of the particle shape and structure on the flowability of electrolytic copper powder. IV. The internal structure of the powder particles
(Journal of the Serbian Chemical Society, 2004)
The structure of powder particles was analysed by considering their cross sections. It was shown that the structure of powder particles of nonsieved flowing powders is sufficiently dense to produce a continuous surface, ...