Претраживање
Приказ резултата 11-20 од 385
Using the image analysis program for prediction of thermal stability behavior of refractory specimen
(8th International Symposium on Multifunctional and Functionally Graded Materials, FGM2004, 2005)
Most important properties which are usually measured for refractories are work temperature and thermal stability. Thermal stability of the alumina based samples was measured using a standard laboratory procedure, the water ...
Chain conformational statistics and mechanical properties of elastomer composites
(Progress in Advanced Materials and Processes: Proceedings of the Fifth Jugoslav Materials Research Society, YUCOMAT V, 2004)
A new equation of state for elastomer network under constrains due to fillers has been proposed and verified for two most common and industry important rubbers, natural rubber and styrene-butadiene rubber. A series of ...
Enhanced activity in ethanol oxidation of Pt3Sn electrocatalysts synthesized by microwave irradiation
(Maik Nauka/Interperiodica/Springer, New York, 2011)
High surface area carbon supported Pt and Pt3Sn catalysts were synthesized by microwave irradiation and investigated in the ethanol electro-oxidation reaction. The catalysts were obtained using a modified polyol method in ...
Synthesis of N-substituted 4,6-dimethyl-3-cyano-2-pyridones under microwave irradiation
(Taylor & Francis Inc, Philadelphia, 2006)
N-substituted 4,6-dimethyl-3-cyano-2-pyridones have been prepared from acetylacetone, N-substituted cyanoacetamide, and pyperidine as catalyst under microwave irradiation without solvent. The rapid and simple method produced ...
Fracton scaling and dynamical properties of elastomer materials
(8th Conference of the Yugoslav Materials Research Society, 2007)
Scaling of the real and the imaginary part of dynamic moduli with frequency, for fully cured elastomer materials as gum and active carbon black filled butyl rubbers, is considered experimentally and theoretically. For gum ...
Thermal shock behavior of alumina based refractories: Comparison with the mechanical data and thermal stability behavior prediction
(Belgian Ceramic Soc, Mons, 2008)
The thermal shock behavior of a large grain size alumina based refractories were investigated both experimentally, using standard procedure of water quench test and using mathematical calculation method for determining the ...
Conduction mechanism based model of organic field effect transistor structure
(8th Conference of the Yugoslav Materials Research Society, 2007)
Carriers mobility model of olygomer and polymer semiconductor based OFET (Organic Field Effect Transistor) structures is presented in this paper. Starting from the conduction mechanism in the mentioned organic materials, ...
Recycled wool-based nonwoven material for decolorisation of dyehouse effluents
(Emerald Group Publishing Limited, Bingley, 2009)
Purpose - The purpose of this paper is to investigate the possible application of recycled wool-based nonwoven material (RWNM) for removal of different dyes that are used in textile dye houses. Design/methodology/approach ...
Aramid fiber reinforced laminar thermoplastic composite materials
(Journal of Advanced Materials, 2005)
In order to obtain a composite material with desired improved resistance to penetration of ballistic projectile, a poly(p-phenyleneterephthalamide) reinforced laminar thermoplastic composite material has been made. This ...
The influence of low-temperature plasma and enzymatic treatment on hemp fabric dyeability
(Inst Chemical Fibres, Lodz, 2007)
In order to study the influence of low-temperature air plasma and enzymatic treatment on the dyeing properties of hemp, "cold dyeing" of hemp fabric with acid dye (C.I. acid blue 113) and direct dye (C.I direct red 81) was ...