Претраживање
Приказ резултата 51-58 од 58
Characterization and usefulness of corn cob as biosorbent for Pb2+, Cu2+ and Zn2+ ions removal from aqueous solutions / Karakterizacija i primena oklaska kukuruza za biosorpciju Pb2+, Cu2+ i Zn2+ jona iz vodenog rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The objective of this study was to investigate corncob as biosorbent for heavy metals removal from aqueous solutions. All biosorption experiments were performed in batch system. The biosorbent were caracterized by thermal ...
Influence of microwave irradiation on hypochlorite decolorisation of synthetic dyes / Uticaj mikrotalasnog zračenja na obezbojavanje sintetskih boja hipohloritom
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
In this study three synthetic dyes were treated using hypochlorite or combination of hypochlorite and microwave irradiation in order to investigate factors which determine decolorisation of the investigated compounds. An ...
Synthesis of high-performance alkyd anticorrosion coatings based on waste poly(ethylene terephthalate) / Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata)
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthesis of high-performance anticorrosive coatings obtained from alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates, synthesized by catalytic depolymerization ...
Techno-economic analysis of unsaturated polyester production from waste PET / Tehno-ekonomska analiza proizvodnje nezasićenih poliestara iz otpadnog PET-a
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Unsaturated polyester resins (UPe) were synthesized from maleic anhydride and products of glycolysis, obtained by polyethylene terephthalate (PET) depolymerization with dipropylene glycol (DPG) in the presence of tetrabutyl ...
Graphene reinforced hydroxyapatite biocomposite coatings obtained by electrophoretic deposition on titanium / Biokompozitne prevlake hidroksiapatita ojačane grafenom, dobijene elektroforetskim taloženjem na titanu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Fast ongoing research of graphene-based nanomaterials reveals that their exceptional properties could be utized for biomedical applications, especially in tissue engineering and drug delivery. Here, we summarized the results ...
Influence of the structural changes on cavitation resistance of Al18SiCuMg alloy produced by rheocasting process / Uticaj strukturnih promena na kavitacionu otpornost Al18SiCuMg legure proizvedene reokasting procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The influence of stirring speeds of 1000 and 1500 r/min on the microstructure of Al18SiCuMg alloy was investigated. The smaller size of Si particles of rheocast sample obtained by higher cooling rate and higher stirring ...
Micromechanical crack analysis of glass-epoxy laminated composites subjected to tension load / Mikromehanička analiza loma laminatnog staklo-epoksi kompozitnog materijala ispitivanog na zatezanje
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The main objective of this study is to determine tensile properties of the glass-epoxy polymer composite material. The material is glass fiber 280 g/m², 'twill woven' with 100 cm width, type - Interglas 92125, and epoxy ...
The influence of light on corrosion of polyaniline coated mild steel / Uticaj osvetljenosti na koroziju mekog čelika sa prevlakom polianilina
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The influence of light of the mild steel corrosion in 3% NaCl solution with polyaniline coating based on the possibilities that polyaniline can generate photoelectrons, even in the laboratory conditions has been investigated.