Pretraživanje
Prikaz rezultata 31-40 od 58
Assessment of the integrity of welded pipes / Procena integriteta zavarenih cevi
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The subject of the paper is analysis of the integrity of welded pipes made of API J55 steel by high frequency contact welding (HF). Experimental research on the mechanical properties of the base material was conducted on ...
Characterization of oxide coatings formed by plasma electrolytic oxidation of aluminum in sodium tungstate / Karakterizacija oksidnih slojeva dobijenih plazma elektrolitičkom oksidacijom aluminijuma u natrijum volframatu
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
This paper presents our recent research on morphology and phase composition of oxide coatings formed by plasma electrolytic oxidation of aluminum in 0.1 M sodium tungstate at constant current density of 15 mA/cm2 and ...
Modelling and optimization of surfactant sensor response characteristics for the use in surface water and wastewater analysis / Modelovanje i optimizovanje održivih karakteristika tenzidnog senzora za korišćenje pri analizi površinskih i otpadnih voda
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The theoretical model of potentiometric titration curves of sodium dodecyl sulfate (anionic surfactant) was proposed and the response parameters of two surfactant sensors (commercial and self-made) were investigated. The ...
Corrosion properties of an aluminium alloy 7000 series after a new two step precipitation hardening / Otpornost prema koroziji aluminijumske legure serije 7000 posle novog dvostepenog termičkog taloženja
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Corrosion properties of an aluminium alloy 7000 series were investigated by different electrochemical methods. The alloy was subjected to the one-step and to a new two-step precipitation hardening. Polarization measurements ...
Time: Temperature superposition principle: Application of WLF equation in polymer analysis and composites / Princip superponiranja vremena i temperature - primena WLF jednačine za ispitivanje polimera i kompozita
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Polymers are the most studied viscoelastic material. The shorter times (high frequencies) corresponding to lower temperatures and long times (low frequencies) to high temperatures. This represents the quantitatively applied ...
Synthesis of 4,6-dimethyl-3-cyano-2-pyridone catalysed by amino acids / Sinteza 4,6-dimetil-3-cijano-2-piridona katalizovana aminokiselinama
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
In this work the synthesis of 4,6-dimethyl-3-cyano-2-pyridone catalyzed by amino acids was studied. In the first part of the work, the optimization was carried out by varying the initial concentration of glycine, the molar ...
Analysis of the effects of butt welded joints on a carrying capacity of a structure tank / Analiza uticaja sučeono zavarenih spojeva na nosivost konstrukcije rezervoara
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
In the present paper, after calculation using the Finite Element Method (FEM), stress distribution on the model of a part of the pressure-tank mantle without welded joints (WJ), with transversal WJ, longitudinal WJ and ...
Impedance characteristics of aluminum with sol-gel ceria protective coating during the exposure to chloride corrosion agent / Impedansni odgovor aluminijuma sa zaštitnom prevlakom oksida cerijuma tokom izlaganja hloridnoj korozionoj sredini
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Electrochemical impedance characteristics of bare Al and Al with CeO2 coating prepared sol-gel procedure from the ceria sol are investigated. The corrosion behavior is monitored during the exposure to 3 wt. % NaCl aqueous ...
Solvatochromism of 5-(4-substituted arylazo)-4-phenyl-6-methyl-3-cyano-2-pyridones / Solvatohromizam 5-(4-supstituisanih arilazo)-4-fenil-6-metil-3-cijano-2-piridona
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Eight 5-(4-substituted arylazo)-4-phenyl-6-methyl-3-cyano-2-pyridones were synthesized by reaction of benzoylacetone and arendiazonium salt, followed by condensation with cyanoacetamide. Absorption spectra of all azo ...
Influence of the structural changes on cavitation resistance of Al18SiCuMg alloy produced by rheocasting process / Uticaj strukturnih promena na kavitacionu otpornost Al18SiCuMg legure proizvedene reokasting procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The influence of stirring speeds of 1000 and 1500 r/min on the microstructure of Al18SiCuMg alloy was investigated. The smaller size of Si particles of rheocast sample obtained by higher cooling rate and higher stirring ...