Претраживање
Приказ резултата 161-170 од 174
Strength design calculation of a horizontal pressure vessel / Kontrolni proračun čvrstoće horizontalne posude pod pritiskom
(Society for Structural Integrity and Life, Institute for Material Testing, 2013)
Standards SRPS M.E2.250-262 for calculation of pres-sure vessels have been replaced by SRPS EN 13445-3. This means that calculations of new equipment and check calculations of equipment in service are subjected to ordinance ...
Contribution to the Serbian coal ranking and fly ash characterization using Pb isotopic ratio
(The Netherlands Press, 2022)
The Republic of Serbia generates the majority of its electricity at the thermal power plants (TE) Nikola Tesla, Kolubara, and Kostolac. Coal is extracted from the Kolubara basin, which produces approximately 70% of lignite ...
Influence of encastering on thin-walled cantilever beams with u and z profiles on the magnitude of equivalent stress and deformation
(Society for Structural Integrity and Life, Institute for Material Testing, 2019)
The purpose of this work is to present analytical and numerical determination of equivalent stress and deformation of open section thin-walled U and Z cantilever beams loaded with torsion. This work can be divided into two ...
Production of sub-micro sized silver particles by chemical reduction method in an environmentally-friendly manner
(Savez inženjera metalurgije Srbije, Beograd, 2020)
Silver nitrate in the solution was reduced in the presence of the dispersants by ascorbic acid, and silver particles were generated. The main goal was to examine the influence of different dispersants. The purpose was to ...
Exploitation properties of ni-pd/al2o3 catalyst supported on ceramic foam
(Savez inženjera metalurgije Srbije, Beograd, 2015)
The goal of this research was to examine exploitation properties of Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam in the dry methane reforming. The catalyst was prepared by using aerosol method. Chloride precursors ...
Organoclay-polymer nanocomposites / Organoglina-polimerni nanokompoziti
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The properties of polymer nanocomposites exceed the properties of common composite materials due to the nanoscale size and morphology of the fillers used. Particulate fillersare commonly used in polymers forimproved ...
Influence of working conditions on strength calculation of pressure vessel of austenitic steel according to SRPS EN 13445 / Uticaj radnih uslova na proračun čvrstoće posude pod pritiskom od austenitnog čelika prema SRPS EN 13445
(Society for Structural Integrity and Life, Institute for Material Testing, 2013)
Upon the adoption of regulations for pressure equipment the series of standards SRPS EN 13445 began to apply. The paper illustrates strength calculation of a vertical cylindrical pressure vessel of austenitic steels according ...
New types of protective coatings and development of test methods / Nove vrste zaštitnih premaza i razvoj metoda ispitivanja
(Society for Structural Integrity and Life (DIVK), 2023)
The paper presents the results of synthesis and characterisation of refractory coatings based on various fillers
intended for the protection of metallic structures. Refractory
fillers applied are based on mullite, ...
Anodization of Ti-based materials for biomedical applications: A review
(Association of Metallurgical Engineers of Serbia, 2016)
Commercially pure titanium (cpTi) and titanium alloys are the most commonly used metallic biomaterials. Biomedical requirements for the successful usage of metallic implant materials include their high mechanical strength, ...
Effect of the pH of artificial saliva on ion release from commercially pure titanium / Uticaj pH vrednosti veštačke pljuvačke na otpuštanje jona iz komercijalno čistog titana
(Faculty of Technology, Novi Sad, 2013)
Due to their excellent characteristics, such as chemical inertness, mechanical resistance, low Young's modulus, high corrosion resistance, and outstanding biocompatibility, titanium and its alloys are the most used metallic ...