Претраживање
Приказ резултата 11-20 од 20
Influence of synthesis parameters on the structure of boehmite sol particles
(Elsevier, Amsterdam, 2003)
Influence of the type and amount of acid, used for aluminium hydroxide peptization, on the crystallinity and specific surface area of the dispersed phase of boehmite sols as well as the pH of sols, was investigated. The ...
Mass transfer in vertical liquid-solids flow of coarse particles
(Elsevier Science Bv, Amsterdam, 2009)
Wall-to-bed mass transfer in the hydraulic transport of spherical glass particles was studied. The experiments were performed by transporting spherical glass particles 1.20, 1.94 and 2.98 mm in diameter with water in a ...
Influence of the gelation and calcination temperatures on physical parameters and photocatalytic activity of mesoporous titania powders synthesized by the nonhydrolytic sol-gel process
(Elsevier, Amsterdam, 2012)
Titania powders were synthesized by nonhydrolitic sol-gel process starting from titanium(IV)-chloride, titanium(IV)-isopropoxide and carbon-tetrachloride. Gelation was performed in solvothermal conditions, at 140 degrees ...
Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process
(Elsevier Science Bv, Amsterdam, 2016)
This study demonstrates that PEG-assisted hydrothermal synthesis provides a convenient and eco-friendly route to fabrication of mesoporous magnetite with enhanced capacity for phosphate removal, excellent potential for ...
Mass transfer and concentration boundary layer in a particulate fluidized bed
(Elsevier Science Bv, Amsterdam, 2016)
The aim of this study was to analyze the concentration boundary layer for a comprehensive description of the mass transfer in systems with fluidized particles. Mass transfer from the wall of the column to the fluid in the ...
Analogy between momentum and heat transfer in liquid-solid fluidized beds
(Elsevier Science Bv, Amsterdam, 2015)
Wall-to-bed heat transfer in particulate fluidized beds of spherical particles was studied. Experiments were performed using spherical glass particles of 0.80-2.98 mm in diameter with water in a 25.4 mm I.D. copper tube ...
Prediction of single particle settling velocities through liquid fluidized beds
(Powder Technology, 2009)
Single particle settling velocities through water fluidized beds of mono-sized glass spheres (dp = 0.645, 1.20, 1.94, 2.98 and 5 mm in diameter) were studied experimentally using a column, 40 mm in diameter. The settling ...
Morphologies of electrochemically formed copper powder particles and their dependence on the quantity of evolved hydrogen
(Elsevier Science Sa, Lausanne, 2008)
Copper powder particles formed by electrolysis under different quantities of evolved hydrogen were analyzed using the scanning electron microscopy (SEM) technique. It was found that the structure of the powder particles ...
Prediction of the choking velocity and voidage in vertical pneumatic conveying of coarse particles
(Elsevier, 2006)
A method for predicting the choking velocity and voidage in vertical pneumatic conveying of coarse particles is developed and verified using the data obtained in this study as well as the data of Capes and Nakamura [C.E. ...
Properties of quenched LiFePO4/C powder obtained via cellulose matrix-assisted method
(Powder Technology, 2013)
In this study, nanocrystalline LiFePO4/C composite powder has been synthesized via a cellulose matrix-assisted method. In an experiment conducted under extreme conditions involving rapid heating, short high-temperature ...