Претраживање
Приказ резултата 11-20 од 40
The effect of resin concentration and electrodeposition bath temperature on the corrosion behaviour of polymer-coated steel
(Progress in Organic Coatings, 1990)
A.C. impedance measurements carried out on epoxy-resin electrocoated steels have been used to determine the pore resistance, capacitance and relative permittivity of the organic films. The time dependence of these ...
Corrosion behaviour of epoxy coatings electrodeposited on galvanized steel and steel modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2000)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on hot-dip galvanized steel and steel modified by Zn-Ni alloys were investigated during exposure to 3% NaCl solution. ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2004)
A review is given on Zn-Ni alloys electrochemically deposited on steel under various deposition conditions. The influence of deposition current density and type of deposition solution on the chemical content, phase structure ...
Influence of substrate on the formation and growth kinetics of cathodic electrocoat paint
(Elsevier Science Sa, Lausanne, 1995)
Cataphoretic deposition of an epoxy primer was carried out on four different substrates: bare steel; phosphated steel; bare zinc-plated steel; and phosphated zinc-plated steel. Film growth was followed by observing the ...
The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2007)
The adhesion and electrochemical properties of epoxy coatings electrodeposited on hot-dip galvanized steel with and without passive films were investigated during exposure to 3% NaCl. The passive films were formed in hot ...
Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution
(Elsevier Science Sa, Lausanne, 2006)
Kinetics of the mild steel corrosion protection in 0.1 mol dm(-3) H2SO4 by polypyrrole coatings have been investigated by the means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, polarization measurements ...
Adhesion characteristics and corrosion stability of epoxy coatings electrodeposited on phosphated hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2008)
The influence of hot-dip galvanized steel (HDG) surface pretreatment with phosphate coatings on the corrosion stability and adhesion characteristics of epoxy coatings electrodeposited on HDG steel was investigated. Phosphate ...
The influence of aluminium surface pretreatment on the corrosion stability and adhesion of powder polyester coating
(Elsevier Science Sa, Lausanne, 2010)
One of the most important factors in corrosion prevention by protective coatings is the coating adhesion loss under environmental influence. Thus, adhesion strength is often used when characterizing protective properties ...
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
Synthesis and characterization of interpenetrating polymer networks with hyperbranched polymers through thermal-UV dual curing
(Elsevier Science Sa, Lausanne, 2008)
The aim of this study was to investigate the possibility of using acrylated hyperbranched polyesters (HBP) as UV curable component in dual curing automotive applications. Dual curing is one of possible ways to obtain fast ...