Претраживање
Приказ резултата 21-30 од 43
The impact of wood fiber surface modification on physical properties of wood-polymer composites / Uticaj modifikacije površine vlakana drveta na mehanička svojstva kompozita polimer-drvo
(Savez inženjera i tehničara Srbije, Beograd, 2016)
In this paper, the impact of wood fiber surface modification on mechanical properties of poly-(methyl methacrylate)(PMMA)-wood composite was examined. FTIR analysis has shown that the wood fiber surface modification was ...
The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation / Primena zeolitnih prahova za izradu kompozitnih polimernih membrana za separaciju ugljen-dioksida
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The main task of the work is to construct the polymeric membrane that could be used for the waste gases treatment. For this purpose, membrane must have high permeability for the carbon dioxide and low permeability of the ...
Impregnation of cellulose acetate films with carvacrol using supercritical carbon ioxide / Impregnacija filmova acetata celuloze karvakrolom pomoću natkritičnog ugljenik(IV)-oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Cellulose acetate films were impregnated with carvacrol using supercritical carbon dioxide. The supercritical impregnation process, conducted in a static regime at pressure of 21 MPa and temperature of 50°C, was optimized ...
Examination of the adhesion of polymer composite films based on Bis-GMA/TEGDMA on different metal substrates / Ispitivanje adhezije polimernih kompozitnih filmova na bazi Bis-GMA/TEGDMA na različitim metalnim podlogama
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The subject of this study is the quantitative adhesion of a UV-curing composite film based on Bis-GMA (Bisphenol A glycidylmethacrylate) / TEGDMA (triethylene glycol dimethacrylate) as a matrix and particles doped with ...
Sorption of textile dyes from textile wastewater by chitosan-based hydrogel / Sorpcija boja za tekstil iz tekstilnih otpadnih voda pomoću hidrogela na bazi hitozana
(Savez inženjera i tehničara Srbije, Beograd, 2018)
With the excessive risks that are present in today's environment, it is of great importance to treat wastewaters before their discharge in water streams. One of the everyday challenges is design of a low-cost and environmentally ...
Application of alumosilicate polymers based on metakaolin in adsorption of cadmium ions from wastewater / Primena alumosilikatnih polimera na bazi metakaolina u adsorpciji jona kadmijuma iz otpadnih voda
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Alumosilicate polymers (geopolymers) based on metakaolin as precursor and alkaline activators of different concentrations (2M, 4M, 6M and 8M NaOH/Na2SiO3) were used to remove ions of cadmium from wastewater. Experiments ...
Optimization of the process of calcium-carbonate dispersion stabilization for paper industry needs / Proces dobijanja stabilne disperzije kalcijum-karbonata za potrebe papirne industije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
This paper presents the optimized technological process for obtaining stable calcium carbonate dispersion (CaCO3) in accordance to the standard prescribed in the paper industry. The reason for using CaCO3 in paper production ...
Synthesis and properties of nano-hydroxyapatite/poly (methacrylic acid) composite hydrogels / Uticaj neutralizacije na svojstva poroznih hidrogelova na bazi hidroksiapatita i poli(metakrilne kiseline) sintetisanih slobodno-radikalskom polimerizacijom
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Goals. The goal of this study was a development of biocompatible composite hydrogels, structurally similar to native bone tissue, by incorporation of ~60 wt % of calcium hydroxyapatite (HA) into a matrix of hydrogels. Also, ...
Effect of AL2O3 particles on the toughness of hybrid composite with EVA matrix and UHMWPE fibersas reinforcement / Uticaj AL2O3 čestica na žilavost hibridnog kompozita sa EVA matricom ojačanog UHMWPE vlaknima
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The aim of this paper is to investigate the mechanical properties of hybrid composites with the polymer matrix of the copolymer of ethylene and vinyl acetate (EVA), ultra high molecular weight polyethylene fibers (UHMWPE) ...
Innovative solutions for the extraction of technology metals from complex primary and secondary raw materials / Inovativna rešenja u ekstraktivnoj metalurgiji kompleksnih primarnih i sekundarnih sirovina
(Savez inženjera i tehničara Srbije, Beograd, 2016)
Presented compilation of scientific, theoretical and experimental results, promotes an innovative synergy of various metals and industrial activities in metallurgy, resulting in profitable transformation of byproducts and ...