Претраживање
Приказ резултата 1-10 од 47
Effect of alumina based particles on mechanical properties and resistance to acryloid composites cavitation / Uticaj čestica na bazi aluminijum oksida na mehanička svojstva i otpornost na kavitaciju akriloidnih kompozita
(Savez inženjera i tehničara Srbije, Beograd, 2018)
In the processes of preservation and restoration of sculptures and archaeological objects, copolymer materials of acrylate type are used because they have proved useful in conservation practice. The main disadvantage of ...
Metallurgical processing of copper secondary raw materials / Metalurška prerada sekundarnih sirovina bakra
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Procedures for copper secondary raw materials processing include two basic stages: pretreatment of the copper waste and its further metallurgical processing. For copper waste pretreatment technology, there are different ...
Antimicrobial hydrogels based on 2-hydroxyethyl methacrylate and itaconic acid containing silver(I) ion / Antimikrobni hidrogelovi na bazi 2-hidroksietil metakrilata i itakonske kiseline koji sadrže srebro(I) jon
(Savez inženjera i tehničara Srbije, Beograd, 2014)
The objective of our study was to develop new antimicrobial hydrogels silver/poly(2-hydroxyethyl methacrylate/ itaconic acid) (Ag/P(HEMA/IA)). The P(HEMA/IA) samples, with different HEMA/IA ratio, were prepared by free ...
Formic acid electrooxidation on carbon supported platinum catalyst with preferential plane orientation / Oksidacija mravlje kiseline na platinskim katalizatorima na ugljeničnom nosaču sa preferencijalno orijentisanim ravnima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Pt-based nanocatalysts supported on Vulcan XC-72R carbon, were prepared by water-in-oil microemulsion method, with addition of various amounts of HCl in the water phase. Polyethileneglycoldodecylether (BRIJ 30) was used ...
Optimization of chitosan gel preparation for supercritical impregnation of thymol / Uticaj pripreme hitozan gelova na natkritičnu impregnaciju sa timolom
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The impregnation of differently prepared chitosan gels with thymol using supercritical carbon dioxide (scCO2) was studied in order to obtain new materials with added value without the use of organic solvents. The optimum ...
The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation / Primena zeolitnih prahova za izradu kompozitnih polimernih membrana za separaciju ugljen-dioksida
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The main task of the work is to construct the polymeric membrane that could be used for the waste gases treatment. For this purpose, membrane must have high permeability for the carbon dioxide and low permeability of the ...
Fluorescence analysis of liposomal membranes permeability / Fluorimetrijska analiza permeabilnosti lipozomalnih membrana
(Savez inženjera i tehničara Srbije, Beograd, 2019)
The present study provides insight into changes in the liposomal membrane fluidity as a result of variation of structural components (two types of standard phospholipids - 1,2-dipalmitoyl-sn-glycerero3-phosphocholine, i.e. ...
Impregnation of cellulose acetate films with carvacrol using supercritical carbon ioxide / Impregnacija filmova acetata celuloze karvakrolom pomoću natkritičnog ugljenik(IV)-oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Cellulose acetate films were impregnated with carvacrol using supercritical carbon dioxide. The supercritical impregnation process, conducted in a static regime at pressure of 21 MPa and temperature of 50°C, was optimized ...
Examination of the adhesion of polymer composite films based on Bis-GMA/TEGDMA on different metal substrates / Ispitivanje adhezije polimernih kompozitnih filmova na bazi Bis-GMA/TEGDMA na različitim metalnim podlogama
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The subject of this study is the quantitative adhesion of a UV-curing composite film based on Bis-GMA (Bisphenol A glycidylmethacrylate) / TEGDMA (triethylene glycol dimethacrylate) as a matrix and particles doped with ...
Optimization of the process of calcium-carbonate dispersion stabilization for paper industry needs / Proces dobijanja stabilne disperzije kalcijum-karbonata za potrebe papirne industije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
This paper presents the optimized technological process for obtaining stable calcium carbonate dispersion (CaCO3) in accordance to the standard prescribed in the paper industry. The reason for using CaCO3 in paper production ...