Претраживање
Приказ резултата 11-20 од 58
Basic principles and applications of photoelectrochemical reactions / Osnovni principi i primena fotoelektrohemijskih reakcija
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The paper discusses the basic principles of photoelectrochemistry and photo electrochemical reactions. Considered the application photoelectrochemicl cells in the conversion of the sun iradiation energy into electricity. ...
Indentation behaviour of 'soft film on hard substrate' composite system type / Ponašanje kompozitnih sistema tipa 'mek film na tvrdom supstratu' na testu utiskivanja
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
This investigation has been carried out in order to analyse and compare the hardness response of different composite systems of the same type, named 'soft film on hard substrate' composite system. Composite systems of mono- ...
Aramid composites impregnated with different reinforcement: Nanofibers, nanoparticles and nanotubes / Aramidni kompoziti impregnisani sa različitim ojačanjima - nanovlakna, nanočestice i nanocevi
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
In this study, the electrospun nanofibers, nanoparticles and nanotubes were used as reinforcement in order to improve mechanical properties of materials for ballistic protection. The samples of polyurethane/p-aramid ...
Influence of acidic solutions on the strain distribution in glasspolyester composite pipes subjected to internal pressure / Uticaj rastvora kiselina na raspodelu deformacija kod staklo-poliestar kompozitnih cevi istaloženih dejstvu unutrašnjeg pritiska
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The basic subject of this paper was the determination of the strain distribution in glass-polyester composite pipes subjected to internal pressure. Firstly, the test was performed on virgin pipe segments (without the ...
Magnetic behaviour of hybrid magnetic composite materials / Magnetno ponašanje hibridnih magnetnih kompozitnih materijala
(Inženjersko društvo za koroziju, Beograd, 2014)
Polymer bonded magnets are contemporary materials with a very large range of applications. The objective of this study is to assess how different content of Nd-Fe-B and/or barium ferrite particles affect on magnetic and ...
Microstructural properties and cavitation behavior of hypereutectic Al-Si alloy obtained by rheocasting process / Mikrostrukturna svojstva i kavitaciono ponašanje nadeutektičke Al-Si legure dobijene reokasting postupkom
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The purpose of this study was to investigate possible application of AlSi alloy produced by rheocasting process in cavitation conditions. A rheocasting process was used to refine the as cast microstructure and improve the ...
Influence of microwave irradiation on hypochlorite decolorisation of synthetic dyes / Uticaj mikrotalasnog zračenja na obezbojavanje sintetskih boja hipohloritom
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
In this study three synthetic dyes were treated using hypochlorite or combination of hypochlorite and microwave irradiation in order to investigate factors which determine decolorisation of the investigated compounds. An ...
Synthesis of high-performance alkyd anticorrosion coatings based on waste poly(ethylene terephthalate) / Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata)
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthesis of high-performance anticorrosive coatings obtained from alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates, synthesized by catalytic depolymerization ...
Influence of the structural changes on cavitation resistance of Al18SiCuMg alloy produced by rheocasting process / Uticaj strukturnih promena na kavitacionu otpornost Al18SiCuMg legure proizvedene reokasting procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The influence of stirring speeds of 1000 and 1500 r/min on the microstructure of Al18SiCuMg alloy was investigated. The smaller size of Si particles of rheocast sample obtained by higher cooling rate and higher stirring ...
Characterization and usefulness of corn cob as biosorbent for Pb2+, Cu2+ and Zn2+ ions removal from aqueous solutions / Karakterizacija i primena oklaska kukuruza za biosorpciju Pb2+, Cu2+ i Zn2+ jona iz vodenog rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The objective of this study was to investigate corncob as biosorbent for heavy metals removal from aqueous solutions. All biosorption experiments were performed in batch system. The biosorbent were caracterized by thermal ...