Pretraživanje
Prikaz rezultata 31-40 od 108
PtAu catalyst with enhanced activity for formic acid oxidation / PtAu katalizator sa poboljšanom aktivnošću za reakciju oksidacije mravlje kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
PtAu systems are recognized as good catalysts for the oxidation of formic acid electrooxidation, which is investigated as a possible anodic reaction in low-temperature fuel cells. In this research, bimetallic PtAu ...
Impedance characteristics of aluminum with sol-gel ceria protective coating during the exposure to chloride corrosion agent / Impedansni odgovor aluminijuma sa zaštitnom prevlakom oksida cerijuma tokom izlaganja hloridnoj korozionoj sredini
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Electrochemical impedance characteristics of bare Al and Al with CeO2 coating prepared sol-gel procedure from the ceria sol are investigated. The corrosion behavior is monitored during the exposure to 3 wt. % NaCl aqueous ...
Influence of microwave irradiation on hypochlorite decolorisation of synthetic dyes / Uticaj mikrotalasnog zračenja na obezbojavanje sintetskih boja hipohloritom
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
In this study three synthetic dyes were treated using hypochlorite or combination of hypochlorite and microwave irradiation in order to investigate factors which determine decolorisation of the investigated compounds. An ...
Studying of physicochemical properties of newly synthesized uracil derivatives / Proučavanje fizičko-hemijskih svojstava novosintetisanih derivata uracila
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Uracil derivatives are potentially biologically active compounds, so the investigation of their physical and chemical properties is very important for their further application. In this work a series of newly synthesized ...
Investigation of the anodic behaviour of mild steel in different solutions as a base for the selection of suitable electrolyte for the synthesis of electro conducting polymer films / Ispitivanje anodnog ponašanja mekog čelika u različitim rastvorima u cilju izbora elektrolita za elektrohemijsku sintezu filmova elektroprovodnih polimera
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the anodic behavior of mild steel in the different solutions of the organic and the inorganic electrolytes, with the aim to select the electrolyte for the electrochemical synthesis of electro conducting polymer ...
Electrochemical deposition and corrosion stability of Zn-Co alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Co legura
(Engineering Society for Corrosion, Belgrade, Serbia, 2006)
The influence of the type of the deposition solution, deposition current density and temperature of deposition solution on the phase structure and corrosion properties of Zn-Co alloys was examined. Alloys were deposited ...
The influence of impurities and theirs removal in the electrochemical measurements / Uticaj nečistoća i njihovo uklanjanje u elektrohemijskim merenjima
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the different kind of impurities which can have the influences on electrochemical (corrosion) measurements in the electrolytic solutions, as well as the methods of theirs removal, has been given.
Epoxy coatings electrodeposited on steel electrochemically modified by Zn-Co alloys / Epoksidne kataforetske prevlake na čeliku modifikovanom Zn-Co legurama
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The corrosion behavior of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys deposited from chloride and sulphate baths were investigated during exposure to 3 % NaCl. The electrochemical impedance ...
Uticaj gustine izmene za procese taloženja na nastajanje tankog površinskog sloja metala na nesrodnoj podlozi
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
Electroplating could be defined as a group of procedures in which metal surfaces (sometime nonmetals) transforms, so the surface properties are changed from base materials to the deposited metal. This goal can be achieved ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel / Elektrohemijska sinteza i koroziono ponašanje tankih filmova polianilina na mekom čeliku
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The electrochemical synthesis of polyaniline (PANI) on mild steel from the sodium-benzoate solutions has been investigated. It has been concluded that thin, highly adherent, polyaniline films could be obtained by anodic ...