Претраживање
Приказ резултата 1-10 од 508
Nanomaterial with High Antimicrobial Efficacy-Copper/Polyaniline Nanocomposite
(Amer Chemical Soc, Washington, 2015)
This study explores different mechanisms of antimicrobial action by designing hybrid nanomaterials that provide a new approach in the fight against resistant microbes. Here, we present a cheap copper-polyaniline (Cu-PANI) ...
Determination of temperature stresses in CWR based on measured rail surface temperatures
(Construction and Building Materials, 2021)
The main aim of conducted research is determination of temperature stresses due to the uneven temperature distribution in CWR. This paper presents a methodology for determination of temperature stresses in CWR based on (1) ...
Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors
(Elsevier Sci Ltd, Oxford, 2015)
Previously synthesized nanocrystalline ZnO doped with cobalt and manganese, Bi2O3 and Sb2O3 were the precursors for high voltage varistors preparation. Varistor ceramics were sintered at 750 degrees C, 770 degrees C or 900 ...
Novel kinetic model of the removal of divalent heavy metal ions from aqueous solutions by natural clinoptilolite
(Elsevier, Amsterdam, 2012)
Removal of heavy metal ions from aqueous solutions using zeolites is widely described by pseudo-second order kinetics although this model may not be valid under all conditions. In this work, we have extended approaches ...
Targeting and design of industrial zone waste heat reuse for combined heat and power generation
(Pergamon-Elsevier Science Ltd, Oxford, 2012)
The basic materials industry contributes significantly to global energy demand. The efficient utilization of energy in these industries is essential to sustainable development. In numerous emerging countries, such industrial ...
Highly ordered macroporous gamma-alumina prepared by a modified sol-gel method with a PMMA microsphere template for enhanced Pb2+, Ni2+ and Cd2+ removal
(Elsevier Sci Ltd, Oxford, 2017)
The adsorption performance of three-dimensionally ordered macroporous (3DOM) gamma-alumina was investigated for enhanced Pb2+, Ni2+ and Cd2+ removal. The synthesis was based on a modified sol-gel method using a colloidal ...
Manganese-containing silica-based microporous molecular sieve MnS-1: Synthesis and characterization
(Amer Chemical Soc, Washington, 2003)
Manganese-containing silicalite-1 (MnS-1) was synthesized hydrothermally in the presence of the structure-directing agent (template) tetraethylammonium hydroxide (TEAOH) for the first time. The highly crystalline MnS-1 ...
Alkali activated slag cement doped with Zn-rich electric arc furnace dust
(Journal of Materials Research and Technology-JMR&T, 2020)
Steel production in electric arc furnaces yielding formation of two waste materials, toxic electric arc furnace dust (EAFD) and non-hazardous electric arc furnace slag (EAFS). EAFD presents a potential hazard to the ...
Development of low calorie jams with increased content of natural dietary fibre made from tomato pomace
(Elsevier Sci Ltd, Oxford, 2017)
In this study, four jam formulations were developed, starting with the basic formulation (Jam 1) containing sucrose and without added pectin. Sucrose was partially (50%) replaced by stevioside in formulations of Jam 2 and ...
Production of bioethanol from pre-treated cotton fabrics and waste cotton materials
(Elsevier Sci Ltd, Oxford, 2017)
This study highlights the potential of cotton fabric as a promising feedstock for the production of bioethanol as renewable biofuel. The effect of corona pre-treatment of non-mercerized and mercerized cotton fabrics on ...