Претраживање
Приказ резултата 691-700 од 700
Impact analysis of airborn pollution due to magnesium slag deposit and climatic changes condition
(Soc Ecological Chemistry & Engineering, Opole, 2012)
The impact of airborne pollution by slag from magnesium production was analyzed under different climate conditions. The slag is characterized by X-ray diffraction analysis, scanning electron microscopy, differential thermal ...
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Supercritical carbon dioxide hops extracts with antimicrobial properties
(De Gruyter Open Ltd, Warsaw, 2015)
Extracts obtained from hops (Humulus lupulus L., Cannabaceae) by supercritical fluid extraction (SFE), SFE followed by isomerization, as well as by conventional technique, were investigated for their chemical composition ...
Seam pipes for process industry - Fracture analysis by using ring-shaped specimens
(Savez hemijskih inženjera, Beograd, 2018)
Pipelines are commonly used in process industry for transport of fluids, as well as granular solids, due to their numerous advantages in comparison to other transportation means. Pipe integrity is essential for a reliable ...
Utilization of the integrated process of supercritical extraction and impregnation for incorporation of helichrysum italicum extract into corn starch xerogel
(Savez hemijskih inženjera, Beograd, 2018)
Supercritical CO2 extraction of Helichrysum italicum and impregnation of starch xerogels with the extract by using an integrated scCO(2) extraction and impregnation process were performed at 350 bar and 40 degrees C in ...
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...
Removal of Pb2+ from aqueous solution by P(HEA/IA) hydrogels
(Savez hemijskih inženjera, Beograd, 2016)
A series of poly(2-hydroxyethyl acrylate-co-itaconic acid), P(HEA/IA), hydrogels with different HEA/IA ratio, were synthesized using free radical crosslinking/copolymerization and investigated as sorbents for Pb2+ from ...
Modeling and Prediction of the end of Life Vehicles Number Distribution in Serbia
(Budapest Tech, Budapest, 2016)
The impact of various time-defendant factors on the recycling rate of end-of-life vehicles (ELV) in Republic of Serbia was investigated. Statistical distribution of the frequency of the number of ELV in the year of dismantling ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Influence of the precursor chemical composition on heavy metal adsorption properties of hemp (Cannabis Sativa) fibers based biocarbon
(Srpsko hemijsko društvo, Beograd, 2017)
Waste hemp (Cannabis sativa) fibers were used as sustainable and renewable raw materials for production of low-cost biocarbon sorbent for heavy metals removal. Carbon precursors of different chemical composition were ...