Search
Now showing items 141-150 of 176
Mechanochemical synthesis of nanocrystalline titanium monoxide
(Elsevier, 2008)
Nanocrystalline cubic titanium monoxide, TiOx (0.92 < x < 1.19), with mean crystallite size of ≈ 6 nm, was synthesized by mechanochemical treatment of Ti and TiO2 (rutile) powder mixtures with molar ratios of 1:1, ...
Modeling of the substrate and product transfer coefficients for ethanol fermentation
(WILEY-VCH Verlag GmbH & Co., 2008)
The transfer phenomena of the substrate and product for ethanol fermentation with immobilized biocatalyst were investigated. Fermentation was carried out with a biocatalyst consisting of Ca-alginate gel in the form of ...
Low concentration volatile organic pollutants removal in combined adsorber-desorber-catalytic reactor system / Integrisani sistem adsorber-desorber-katalitički reaktor za uklanjanje malih koncentracija organskih zagađujućih materija
(Association of Chemical Engineers of Serbia, 2008)
The removal of volatile organic compounds (VOCs) from numerous emission sources is of crucial importance due to more rigorous demands on air quality. Different technologies can be used to treat the VOCs from effluent gases: ...
Preparation of biodegradable porous poly(butylene succinate) microspheres / Dobijanje poroznih biodegradabilnih mikrosfera poli(butilen sukcinata)
(Association of Chemical Engineers of Serbia, 2008)
The aim of this study was to determine the optimal conditions for the fabrication of porous microspheres based on poly(butylene succinate), PBS. The biodegradable non-porous PBS microspheres were prepared by the oil-in-water ...
Kinetics of sunflower oil methanolysis at low temperatures
(Elsevier Ltd, 2008)
The kinetics of the sunflower oil methanolysis process was studied at lower temperatures (10-30 °C). The sigmoidal kinetics of the process was explained by the mass transfer controlled region in the initial heterogenous ...
Kinetics and sintering mechanisms of hydro-thermally obtained hydroxyapatite
(Elsevier, 2008)
In this paper, the kinetics and sintering mechanism of hydro-thermally synthesized hydroxyapatite in the temperature range 900-1100 degrees C are presented. It was found that at 900 degrees C, the sintering process is very ...
Ozone absorption in raw waters
(Serbian Chemical Society, 2008)
The ozone absorption in raw water entering the main ozonization step at the Belgrade drinking water supply plant was investigated in a continuous stirred tank reactor (CSTR). A slow chemical reaction rate of dissolved ozone ...
Electrochemical properties of mixed WC and Pt-black powders / Elektrohemijska svojstva smeše prahova WC i Pt
(Serbian Chemical Society, Belgrade, 2008)
The electrochemical characteristics of a mixture of Pt-black and WC powders and its catalytic activity for methanol and formic acid oxidation were investigated in acid solution. XRD and AFM measurements revealed that the ...
Ductile crack growth initiation in welded joints - Micromechanical approach
(Welding in the World, 2008)
The integrity of welded structures depends on the load-carrying capacities of their welded joints. Having in mind that welding process produces a large microstructural gradient through the weld, resulting in variation of ...
Micromechanical model for fracture toughness prediction in Al-Zn-Mg-Cu alloy forgings
(Taylor & Francis Ltd, Abingdon, 2008)
An attempt has been made to model the plane-strain fracture toughness, KIc, in Al-Zn-Mg-Cu alloy forgings subjected to overageing. The proposed model, based on the multiple micromechanisms, reveals the quantitative relations ...