Претраживање
Приказ резултата 51-60 од 199
Sol-Gel Combustion Synthesis of La-9.33(SiO4)(6)O-2 Oxyapatite
(Taylor & Francis Inc, Philadelphia, 2009)
Synthesis of La-9.33(SiO4)(6)O-2 was performed by a new method that represents the combination of sol-gel and combustion procedures using glycine as the fuel. Syntheses were performed from ethanol-water solutions of oxides ...
Incorporation of poly(N-isopropylacrylamide)/chitosan microgel onto plasma functionalized cotton fibre surface
(Elsevier, Amsterdam, 2009)
In the present study, non-thermal plasma treatments using three different gases (air, nitrogen and argon) were used to activate the cotton surface for subsequent poly(N-isopropylacrylamide)/chitosan microgel (PN/CS) ...
The analysis of different processes of extraction: yield of extracts obtained from Aloe vera (Aloe barbadensis Miller) and sweet bay (Laurus nobilis L.) and the exergy analysis of applied processes
(Association of the Chemical Engineers of Serbia, 2009)
The present study was aimed to investigate and compare the efficiency of different methods for the isolation extract from a plant material. Extracts from dried leaves of Aloe vera (A. barbadensis Mill.) and Sweet Bay (Laurus ...
Hydrometallurgical process for extraction of metals from electronic waste, Part I: Material characterization and process option selection
(Savez inženjera metalurgije Srbije, Beograd, 2009)
Used electronic equipment became one of the fastest growing waste streams in the world. In the past two decades recycling of printed circuit boards (PCBs) has been based on pyrometallurgy, highly polluting recycling ...
Biosynthesis of ethyl caproate and other short ethyl esters catalyzed by cutinase in organic solvent
(Elsevier Science Bv, Amsterdam, 2009)
The main objective of this work was to study the enzymatic synthesis of short chain ethyl esters, a group of relevant aroma molecules, by Fusarium solani pisi cutinase in an organic solvent media (iso-octane), and to assess ...
Optimization of the procedure for the synthesis of calcium lactate pentahydrate in laboratory and semi-industrial conditions / Optimizacija postupka sinteze kalcijum-laktat pentahidrata u laboratorijskim i poluindustrijskim uslovima
(Association of Chemical Engineers of Serbia, 2009)
This paper is concerned on the development of the optimal laboratory procedure for the synthesis of calcium lactate pentahydrate and the application of obtained results in a project for a semi-industrial installation for ...
Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources
(Elsevier Sci Ltd, Oxford, 2009)
Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm(-3) NH4Cl; 0.1 mol dm(-3) NH4Cl with addition of 0.1 mol dm(-3) Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Inženjersko društvo za koroziju, Beograd, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Engineering Society for Corrosion, Belgrade, Serbia, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
Damage detection of hybrid aramid/metal-PVB composite materials using optical fiber sensors
(Association of the Chemical Engineers of Serbia, 2009)
Embedding optical fiber sensors within laminar thermoplastic composite material results in forming a system known as 'smart structure'. These sensors present the information about the inner structure health during the ...