Претраживање
Приказ резултата 1-10 од 112
Prediction of single particle settling velocities through liquid fluidized beds
(Powder Technology, 2009)
Single particle settling velocities through water fluidized beds of mono-sized glass spheres (dp = 0.645, 1.20, 1.94, 2.98 and 5 mm in diameter) were studied experimentally using a column, 40 mm in diameter. The settling ...
Damage Level Estimate of API J55 Steel for Welded Seam Casing Pipes
(Strojarstvo, 2009)
The subject of this paper is investigation of the damage level of API J55 steel, used for manufacturing casing pipes by high frequency (HF) contact welding. The analysed pipe was withdrawn after about 70 000 hours of service ...
SmartMetals: a new method for metal identification based on fuzzy logic
(John Wiley & Sons Ltd, Chichester, 2009)
This paper presents a method of searching, identifying and cross-referencing metal alloys based on their chemical composition and/or mechanical properties, typically obtained by analysis and tests. The method uses a general ...
Preparation and characterization TiOx-Pt/C catalyst for hydrogen oxidation reaction
(Royal Soc Chemistry, Cambridge, 2009)
The hydrogen oxidation reaction (HOR) was studied at the home made TiOx-Pt/C nanocatalysts in 0.5 mol dm(-3) HClO4 at 25 degrees C. Pt/C catalyst was first synthesized by modified ethylene glycol method (EG) on commercially ...
Polarization curves in the ohmic controlled electrodeposition of metals
(Oxford : Pergamon-Elsevier Science Ltd, 2009)
The conditions under which ohmic controlled metal electrodeposition occurs are discussed using a simple mathematical model. it is shown that ohmic controlled electrodeposition can be operative if the value of the exchange ...
The effects of the pause to pulse ratio in the regime of pulsating overpotential on the formation of honeycomb-like structures
(Elsevier Science Inc, New York, 2009)
The formation of honeycomb-like structures in the pulsating overpotential (PO) regime was examined by scanning electron microscopy (SEM). The honeycomb-like structures obtained with a square-wave PO of different pause to ...
Bioethanol production by immobilized Sacharomyces cerevisiae var. ellipsoideus cells
(African Journal of Biotechnology, 2009)
Bioethanol can be produced by fermentation of sugars from various waste agricultural materials. Whichever system for bioethanol production is chosen, the attention must be paid to the overall economics and energy consumption. ...
Properties of Cu-Al2O3 Powder and Compact Composites of Various Starting Particle Size Obtained by High-Energy Milling
(Savez inženjera metalurgije Srbije, 2009)
Copper-based composites were obtained using high energy milling. The inert gas-atomized prealloyed copper powder (average particle size - 30 μm) containing 2 wt.% Al, and the mixture of electrolytic copper powder (average ...
Comparative study of cu(2+) adsorption on a zeolite, a clay and a diatomite from Serbia
(Applied Clay Science, 2009)
The adsorption of a zeolite, clay and diatomite from Serbia toward aqueous Cu2+ ions was studied, at different pH. The adsorbents were characterized with respect to phase composition, specific surface area and point of ...
Effect of different fermentation parameters on bioethanol production from corn meal hydrolyzates by free and immobilized cells of Saccharomyces cerevisiae var. ellipsoideus
(Wiley, Hoboken, 2009)
BACKGROUND: Bioethanol produced from renewable biomass, such as corn meal, is a biofuel that is both renewable and environmentally friendly. Significant scientific and technological investments will be needed to achieve ...