Претраживање
Приказ резултата 61-66 од 66
Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants
(Savez hemijskih inženjera, Beograd, 2016)
Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration ...
High temperature transesterification of soybean oil with methanol using manganese carbonate as catalyst
(Savez hemijskih inženjera, Beograd, 2018)
The manganese carbonate catalyst, prepared by precipitation method, was used in transesterification of soybean oil under subcritical condition of methanol. Catalyst samples were characterized by X-ray diffraction (XRD), ...
Cfd analysis and flow model reduction for surfactant production in helix reactor
(Savez hemijskih inženjera, Beograd, 2015)
Flow pattern analysis in a spiral Helix reactor is conducted, for the application in commercial surfactant production. Step change response curves (SCR) were obtained from numerical tracer experiments by three-dimensional ...
Improvement of production performance of functional fermented whey-based beverage / Unapređenje performansi proizvodnje funkcionalnog fermentisanog napitka na bazi surutke
(Association of the Chemical Engineers of Serbia, 2014)
The aim of this study was improvement of the performances for the production of whey-based beverages with highly productive strains of Lactobacillus. Individual or mixed cultures containing Lactobacillus helveticus ATCC ...
Utilization of the integrated process of supercritical extraction and impregnation for incorporation of helichrysum italicum extract into corn starch xerogel
(Savez hemijskih inženjera, Beograd, 2018)
Supercritical CO2 extraction of Helichrysum italicum and impregnation of starch xerogels with the extract by using an integrated scCO(2) extraction and impregnation process were performed at 350 bar and 40 degrees C in ...
Metallic ion release from biocompatible cobalt-based alloy / Otpuštanje metalnih jona iz biokompatibilne legure kobalta
(Association of the Chemical Engineers of Serbia, 2014)
Metallic biomaterials, which are mainly used for the damaged hard tissue replacements, are materials with high strength, excellent toughness and good wear resistance. The disadvantages of metals as implant materials are ...