Pretraživanje
Prikaz rezultata 21-30 od 53
Separation and determination of dimethylarsenate in natural waters / Razdvajanje i određivanje dimetilarsenata u prirodnim vodama
(Serbian Chemical Society, Belgrade, 2012)
A simple and efficient method for the separation and determination of dimethylarsenate DMAs(V) was developed in this work. Two resins, a strong base anion exchange (SBAE) resin and iron-oxide coated hybrid (HY) resin were ...
Oxidized and Ethylenediamine-Functionalized Multi-Walled Carbon Nanotubes for the Separation of Low Concentration Arsenate from Water
(Taylor & Francis Inc, Philadelphia, 2013)
In this work multiwalled carbon nanotubes (MWCNTs) modified by oxidation (o-MWCNTs) and by aminofunctionalization (e-MWCNTs) were examined as potential adsorbents for arsenate removal from water. Adsorption characteristics ...
Removal of Acid Textile Dye from the Aqueous Solution by a New Adsorbent Obtained from Waste Cotton from the Garment Plant
(Chem Soc Pakistan, Karachi, 2020)
The paper investigates the possibility of removing acid dye from the aqueous solution by an adsorption process on new adsorbent prepared from waste cotton textile from the ready-made garment industry. It is a waste generated ...
Ispitivanje adsorpcionih svojstava elektrofilterskog pepela sa deponije termoelektrane „Moravaˮ u odnosu na fosfat-jone prisutne u vodenom rastvoru
(Naučno-stručno društvo za zaštitu životne sredine Srbije, 2016)
U radu su ispitana adsorpciona svojstva letećeg pepela sa deponije termoelektrane „Moravaˮ, u
odnosu na fosfat-jone prisutne u vodenoj sredini. Pepeo iz ove termoelektrane pokazuje dobra
adsorpciona svojstva i mogao ...
Application of raw volcanic rock found in etna valley as an adsorbent of chromates, arsenates and selenates
(Savez inženjera metalurgije Srbije, Beograd, 2018)
This paper aims to determine the potential of volcanic rock found in Etna valley as an adsorbent of heavy metals in anionic form (chromates, arsenates, and selenates). Characterization of the volcanic rock was done with ...
Application of alumosilicate polymers based on metakaolin in adsorption of cadmium ions from wastewater / Primena alumosilikatnih polimera na bazi metakaolina u adsorpciji jona kadmijuma iz otpadnih voda
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Alumosilicate polymers (geopolymers) based on metakaolin as precursor and alkaline activators of different concentrations (2M, 4M, 6M and 8M NaOH/Na2SiO3) were used to remove ions of cadmium from wastewater. Experiments ...
A comparative study of the removal of lead, cadmium and zinc ions from aqueous solutions by natural and Fe(III)-modified zeolite / Uporedna analiza uklanjanja jona olova, kadmijuma i cinka iz vodenih rastvora adsorpcijom na prirodnom i Fe(III)- modifikovanom zeolitu
(Association of the Chemical Engineers of Serbia, 2014)
The main purpose of this research was to explain the differences in the adsorption mechanisms and adsorption capacities of natural and Fe(III)-modified zeolite for Pb2+, Zn2+ and Cd2+. The adsorbents were characterized ...
Waste Cotton and Cotton/Polyester Yarns as Adsorbents for Removal of Lead and Chromium from Wastewater
(Journal of Natural Fibers, 2022)
The possibility of using waste cotton and cotton/polyester yarns to remove lead and chromium ions from polluted water was investigated in this work. Structural, morphological, and adsorption properties of yarns were ...
The Application of a Natural Zeolite for Acid Mine Drainage Purification
(Japan Inst Metals & Materials, Sendai, 2015)
A natural zeolite from Serbia was employed for the removal of heavy metals from acid mine drainage (AMD) generated in the area of copper mine. The efficiency of the natural zeolite samples was tested on AMD that contained ...
Bisphenol a removal from aqueous solution using fine alpha-fe2o3 particles
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Iron(III) oxide particles (alpha-Fe2O3) were obtained from ferrous chloride (FeCl3 center dot 6H(2)O) precursor using ammonium hydroxide as a precipitating agent and particles were calcined at 700 degrees C for 4 h. ...