Search
Now showing items 11-20 of 59
Electrochemical deposition and characterization of zinc-nickel alloys deposited by direct and reverse current / Elektrohemijsko taloženje i karakterizacija legura cink-nikal dobijenih konstantnom i reversnom strujom
(Serbian Chemical Society, Belgrade, 2005)
Zn-Ni alloys electrochemically deposited on steel under various deposition conditions were investigated. The alloys were deposited on a rotating disc electrode and on a steel panel from chloride solutions by direct and ...
Corrosion behaviour of epoxy coatings electrodeposited on galvanized steel and steel modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2000)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on hot-dip galvanized steel and steel modified by Zn-Ni alloys were investigated during exposure to 3% NaCl solution. ...
Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution
(Elsevier Science Sa, Lausanne, 2006)
The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% ...
Electrochemical deposition and characterization of Zn-Fe alloys / Elektrohemijsko taloženje i karakterizacija Zn-Fe legura
(Serbian Chemical Society, Belgrade, 2004)
Zn–Fe alloy electrochemically deposited on steel under various deposition conditions were investigated using anodic linear sweep voltammetry (ALSV) and X-ray diffraction (XRD) analysis for phase structure determination, ...
Corrosion studies on electrochemically deposited PANI and PANI/epoxy coatings on mild steel in acid sulfate solution
(Elsevier Science Sa, Lausanne, 2005)
The corrosion behavior of mild steel and mild steel covered by electrochemically deposited (a) polyaniline (PANI) film, (b) epoxy coating
and (c) PANI/epoxy coating system in 0.1 M sulfuric acid solution were investigated ...
(NH4)2SO4 corrosion of cement in concrete analyzed by an improved mathematical model / (NH4)2SO4 korozija cementa u betonu analizirana poboljšanim matematičkim modelom
(Serbian Chemical Society, Belgrade, 2009)
This paper gives a critical analysis of the equation that predicts and estimates the progress of degradation for various building materials, recently proposed by Matsufuji et al.1 After the analysis, the paper suggests an ...
The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating
(Elsevier Science Sa, Lausanne, 2003)
The electrochemical and transport properties of epoxy coatings electrodeposited on steel and steel modified by Zn-Fe alloys were investigated during exposure to 3% NaCl. The Zn-Fe alloys were deposited on steel surface ...
Mechanics of submerged jet cavitating action: material properties, exposure time and temperature effects on erosion
(Springer, New York, 2008)
Experimental setup with a submerged cavitating jet has been used for the study of influences of material, exposure time and working fluid temperature on the erosion process. Each of the parameters has been varied separately, ...
Corrosion protection of aluminum by vinyltriethoxysilane coatings / Koroziona stabilnost prevlaka viniltrietoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
In this work the influence of the deposition parameters, i.e. silane solution concentration, deposition time and curing time on the corrosion stability of vinyltriethoxysilane (VTES) coatings on aluminum was investigated. ...
The adhesion of epoxy cataphoretic coating on phosphatized hot-dip galvanized steel / Adhezija epoksidne kataforetske prevlake na fosfatiranom pocinkovanom čeliku
(Association of Chemical Engineers of Serbia, 2006)
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy cataphoretic coating was investigated. Phosphate coatings were deposited on hot-dip galvanized steel and the influence of fluoride ...