Претраживање
Приказ резултата 221-228 од 228
Poly(dialkoxyethyl itaconates) .2. The thermal degradation of some poly(dialkoxyethyl itaconates)
(John Wiley & Sons Ltd, W Sussex, 1996)
The oxidative and non-oxidative degradation of poly(di-methoxy-), poly(di-ethoxy-), poly(di-iso-propoxy-) and poly(di-n-butoxyethyl itaconate) were investigated by thermogravimetry. Characteristic degradation temperatures ...
Poly(dialkoxyethyl itaconate)s-I. Some properties of dimethoxyethyl itaconate and its polymer
(Pergamon-Elsevier Science Ltd, Oxford, 1995)
The preparation of dimethoxyethyl itaconate and its polymerisation are described. Some of the properties of the monomer and polymer were determined with special emphasis on the experimental determination of the solubility ...
Local and overall mixing characteristics of the gas-liquid-solid air-lift reactor
(Amer Chemical Soc, Washington, 1994)
Local and overall mixing characteristics were studied for the gas-liquid-solid reactor operating with an internal draft tube and low-density particles. The experimental reactor had a working volume of 7.6 L, column diameter ...
Thermal shock of ceramic material : Damage resistance parameters and critical flaw size
(Trans Tech Publications Ltd., 1997)
The alumina refractories used in this study included a serias of 12 commertial products (two fireclay and ten high alumina brands ) containing ≈ 45 - 90 % Al2O3. Damage resistance parameters R,, R, and RSt were used in ...
The potential of the piezoelectric sensor for the characterization of activated carbon cloth applied in the adsorption of phenol from air
(Amer Chemical Soc, Washington, 1996)
Corrosion behaviour of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloy
(Pergamon-Elsevier Science Ltd, Oxford, 1999)
The corrosion behaviour and thermal stability of epoxy coatings electrodeposited on steel: phosphatised steel and steel previously modified by electrodeposited Zn-Ni alloy was investigated during exposure to 3% NaCl. The ...
Modeling of nanostructural design of ultrafine mullite powder particles obtained by ultrasonic spray pyrolysis
(Pergamon-Elsevier Science Ltd, Oxford, 1999)
In this paper, a model of substructure design of mullite powder particles obtained by spray pyrolysis lit the field of ultrasound excitation is described. Based an this model, the size of subparticles (nanoparticles) ...
Study of thermal stability of epoxy coatings electrodeposited on different substrates
(Elsevier Sci Ltd, Oxford, 1999)
The thermal stability of epoxy coatings electrodeposited on steel, phosphatized steel, steel electrochemically modified by Zn-Ni alloys and aluminium has been investigated. Epoxy coatings were formed by cathodic electrodeposition ...